Tutorials

  • Design & CAD ×
  • Translations ×
  • Measurement / Inspection ×
  • Kinematics ×
  • Moi3D ×
  • Powermill ×
  • Powershape ×
  • SpaceClaim ×
  • TurboCAD ×
  • ViaCAD 3D ×

How to make twisted bar

Oleksandr
in Modeling
1 0 Beginner
It is not obvious to create twisted bar in SpaceClaim, e.g. for welded grating. I hope this lifehack will help You to make it in different cad programs. Как скрутить пруток в SpaceClaim, например для решетчатого настила. Подозреваю, что этот способ можно применять и в других программах.
SpaceClaim bar twisted

problem : powermill changes the orientation of files imoprted in igs format from solidworks

Sourbh
in Design & CAD
1 0 Intermediate
Don't worry about the orientation just simply rotate it through your mouse. and If you are thinking of wrong axis direction than just follow these steps:-
Powermill solidworks powermill

Tutorials:-Working with Power MILL "PART V" Toolpath Leads and Links

Sourbh
in Design & CAD
1 0 Intermediate
Hello Friends, This tutorial continues for power mill Guidance.
Powermill paths sourbh powermill lead links tool

Tutorials:-Working with Power MILL "PART V" Toolpath Leads and Links

Sourbh
in Design & CAD
1 0 Intermediate
Z Heights Skim and Plunge distance provide variable control of rapid move heights within a component. These operate in conjunction with Safe Z and Start Z to minimize slow and unnecessary movement of the tool in fresh air while machining the component form. Skim distance – An incremental distance above the model at which rapid moves occur from the end of one tool track to the start of the next. The tool rapids across the model clearing the highest point along its route by the Skim value. Plunge distance – An incremental distance above the local component surface where a downward rapid movement of a tool changes to plunge rate.
Powermill paths sourbh powermill lead links tool

Tutorials:-Working with Power MILL "PART V" Toolpath Leads and Links

Sourbh
in Design & CAD
1 1 Intermediate
Links To provide for more efficient movement of the tool across the component the link moves that connect adjacent tool tracks can be defined in several different ways. Short/Long Threshold - This defines the distance limit up to which the Short - Links apply. Any move from the end of a tool track to the start of the next, which exceeds this distance is defined as a Long - Link move. For Short links the available options include Safe Z, Incremental, Skim, On Surface, Stepdown, Straight, and Circular Arc. For Long links the available options include Safe Z, Incremental, and Skim. Safe links apply only at the start and end of a toolpath the available options being Safe Z, Incremental, and Skim. For applications where a machine control system will permit arc fitting of rapid moves the Arc Fit Rapid Moves box can be ticked along with a suitable Radius based on the active tool diameter TDU (Of particular benefit to High Speed Machining). •Activate the toolpath 1_1 created earlier in the Leads section. •Set the Leads In and Out to None, if not already set. Press Apply.
Powermill paths sourbh powermill lead links tool

Tutorial: How to model fireplace in SpaceClaim 2012

Tibor
in Design & CAD
0 0 Beginner
STEPS 51-55
SpaceClaim fireplace spaceclaim

Tutorial: How to model fireplace in SpaceClaim 2012

Tibor
in Design & CAD
0 0 Beginner
STEPS 71-75
SpaceClaim fireplace spaceclaim

Tutorial: How to model fireplace in SpaceClaim 2012

Tibor
in Design & CAD
0 0 Beginner
STEPS 6-11
SpaceClaim fireplace spaceclaim

Tutorial: How to add tire on rim in Spaceclaim 2012

Tibor
in Design & CAD
0 0 Beginner
STEPS 1-5
SpaceClaim tipsntricks

Tutorial: How to model fireplace in SpaceClaim 2012

Tibor
in Design & CAD
0 0 Beginner
STEPS 18-23
SpaceClaim fireplace spaceclaim

Tutorial: How to model fireplace in SpaceClaim 2012

Tibor
in Design & CAD
0 0 Beginner
STEPS 12-17
SpaceClaim fireplace spaceclaim

Tutorial: How to model fireplace in SpaceClaim 2012

Tibor
in Design & CAD
0 0 Beginner
STEPS 66-70
SpaceClaim fireplace spaceclaim

how to reduce time involve in plunge in power mill

Sourbh
in Design & CAD
0 0 Beginner
There it is, but I need the solid model to Tell you detail process of Reducing the plunge milling.
Powermill

Tutorial: How to model fireplace in SpaceClaim 2012

Tibor
in Design & CAD
0 0 Beginner
STEPS 56-60
SpaceClaim fireplace spaceclaim

S-shaped battery cooling geometry in ANSYS

Amit Kumar Yadav
in Modeling
0 0 Intermediate
Creating an S-shaped cooling geometry in ANSYS or any other simulation software requires a good understanding of fluid dynamics, heat transfer, and simulation tools. It may also involve several iterations to achieve the desired battery system cooling performance.
SpaceClaim automation simulation performance cooling system battery heat transfer fluid dynamics
White Stratasys Logo White GrabCAD Logo
© 2024 Stratasys Inc.
ABOUT US
RESOURCES
SOCIAL
Streamline Pro
Control
Print
Shop
PARTNERS
COMMUNITY
Contact Us Website Terms of Use Software Terms of Use Privacy policy Trademarks Your Data on GrabCAD
The Computer-Aided Design ("CAD") files and all associated content posted to this website are created, uploaded, managed and owned by third-party users. Each CAD and any associated text, image or data is in no way sponsored by or affiliated with any company, organization or real-world item, product, or good it may purport to portray.