How to model a hinge in Solid Edge?


These are the steps..
-
Step 1:
First of all we create a new part iso.
-
Step 2:
click on sketch and select top plane, and sketch the following rectange
-
Step 3:
after you complete the sketch, click ok and select extrude and extrude it 2mm.
-
Step 4:
Sketch on the top face of the base 3 circles as its showed below.
-
Step 5:
cut extrude and chamfer of 1mm
-
Step 6:
create a sketch on the face of the part,
-
Step 7:
draw a circle and extrude it.
-
Step 8:
then sketch on the cylinders face and create a circle same as in the previous step and cut extrude it...
-
Step 9:
Create a pin on the cylinder.
-
Step 10:
Create a new part and draw the same circles on the base of it (the base is same as in step 2)
-
Step 11:
Chamfer...
-
Step 12:
Go to the upper face and sketch a circle and extrude it.
-
Step 13:
Cut extrude.
-
Step 14:
Cut extrude the pin hole..
-
Step 15:
Create a new assembly and join the two parts.
-
Step 16:
ready