Tutorial - Helical Sweep in Creo Elements/Pro aka Pro Engineer Wildfire?

Here is the tutorial.

  1. Step 1:

    Start Creo in Part mode.

  2. Step 2:

    Insert>>Helical Sweep>>Protusion.

  3. Step 3:

    Keep the default settings and click Done.

  4. Step 4:

    Select the Top Plane and then press the middle mouse button.

  5. Step 5:

    Choose Default and then press middle mouse button.

  6. Step 6:

    The Sketcher window appears.

  7. Step 7:

    Make a center line along vertical axis and a line of 100mm at a distance of 25mm with vertical axis.

  8. Step 8:

    Click done and keep the default pitch value.

  9. Step 9:

    Now the sketcher again appears.

  10. Step 10:

    Draw a circle.

  11. Step 11:

    Exit the sketch and click done. And the helical sweep feature is generated.