Tutorial - Modeling Flower in SolidWorks using Surfacing?

Here is the tutorial.
-
Step 1:
Front Plane >> Sketch.
-
Step 2:
Draw a spline and center line.
-
Step 3:
Revolved surface it.
-
Step 4:
Top plane >> Sketch.
-
Step 5:
Draw this profile.
-
Step 6:
Select Trim surface under surfaces tab.
-
Step 7:
Trim the outside surface of the profile.
-
Step 8:
Thicken under surfaces tab.
-
Step 9:
Select the leaf and then thicken it.
-
Step 10:
Reference Geometry >> Axis.
-
Step 11:
Select top plane and origin. Click OK.
-
Step 12:
Circular pattern.
-
Step 13:
Select the thicken body as the body to be patterned about the axis 6 times.
-
Step 14:
Top plane >> Sketch.
-
Step 15:
Draw a circle.
-
Step 16:
Extrude it.
-
Step 17:
Click Dome under features tab.
-
Step 18:
Top face of the extrusion and dome it.
-
Step 19:
We have the flower body created.