Tutorials

  • Design & CAD ×
  • 3D Printing ×
  • Autodesk 123D ×
  • PTC Creo Elements ×
  • STEP / IGES ×

how to perform analysis test on ansys software

harikrushna dodiya
in Design & CAD
12 1 Intermediate
This is modal analysis of impeller step
PTC Creo Elements

Tutorial on Modeling and Simulation of standard gear

Milan Ilić
in Design & CAD
6 1 Intermediate
Tutorial on Modeling and Simulation of standard gear...
PTC Creo Elements gear standard simulation tutorial engineer pro parametric creo

Tutorial: How to add exploded view in drawing?

Milan Ilić
in Design & CAD
5 0 Intermediate
How to add exploded view in drawing?
PTC Creo Elements drawing exploded view creo pro-e

Tutorial: How to change the units from inch to mm in CREO?

Milan Ilić
in Design & CAD
2 0 Intermediate
ja sam u Creo Parametric 2.0 menjao ovako.. C:\Program Files\PTC\Creo 2.0\Common Files\M070\creo_standards\zatim pokrenuo configure i odabrao 5 (vidi sliku)
PTC Creo Elements inch mm change enginner pro parametric creo units

3D Modeling of a Braitenberg Vehicle in 4 Steps using Autodesk 123D Design

Yoana Ivanova
in Modeling
2 0 Intermediate
This tutorial is suitable for designers who have a basic knowledge of using the open source product Autodesk 123D Design. The steps to build a Breitenberg vehicle are as follows: 1. Modeling a wheel: a cylinder with a diameter of 2 cm and a height of 0.5 cm is placed in the workspace. Drill a hole in it by drawing a circle with a diameter of 0.3 cm and extruding - 0.5 cm with the Extrude tool. We soften the edges of the cylinder with Fillet Radius: 0.5. 2. Clone the wheel: rotate the resulting wheel 90° along the Z axis and copy it with Ctrl+C and Ctrl+V. 3. Modeling the vehicle body: regarding the design of the vehicle body, there are various options. In this case the author models a classic vehicle, which is most often shown in the bibliographic sources. After drawing and extruding a surface with the desired shape we apply Fillet with radius 35 on the back edge and with 30 on the front edge for a contemporary design (i could provide more images if it is needed). On the selected side edges we successively apply Fillet with a radius of 9. 4. Make a special place for the sensor: it is necessary to select the square plane that is located in the middle of the case and successively apply Sketch > Project, Sketch > Offset and Construct > Extrude with a negative value.
Autodesk 123D breitenberg vehicle

how i can get STEP / IGES ???

Amine Mech
in Design & CAD
1 0 Intermediate
STEP / IGES in catia , solidworks , 3ds max , inventor pro .......
STEP / IGES

botella.isg

JOSUE ROMERO
in Assemblies
0 0 Intermediate
botella con ensambles
STEP / IGES botrlla

2.2kW 3000RPM

G.exe
in Assemblies
0 0 Intermediate
2,2 kw 3000 RPM radial aspirator
STEP / IGES 3000d-d radial 2-2kw rotor fan aspirator

Coffee Mug

Samanwita Bagg
in Modeling
0 0 Intermediate
The video explains how to model coffee mug.
STEP / IGES design modeler coffee mug

Bracket

Samanwita Bagg
in Modeling
0 0 Intermediate
The video linked here explains how to model a bracket and analyze using ANSYS Workbench.
STEP / IGES modeling analysis ansys workbench bracket

Maximum rotating angle of universal joint

764ce2aa
in Design & CAD
0 0 Intermediate
refer this http://www.sdp-si.com/D757/couplings3.htm
PTC Creo Elements
White Stratasys Logo White GrabCAD Logo
© 2024 Stratasys Inc.
ABOUT US
RESOURCES
SOCIAL
Streamline Pro
Control
Print
Shop
PARTNERS
COMMUNITY
Contact Us Website Terms of Use Software Terms of Use Privacy policy Trademarks Your Data on GrabCAD
The Computer-Aided Design ("CAD") files and all associated content posted to this website are created, uploaded, managed and owned by third-party users. Each CAD and any associated text, image or data is in no way sponsored by or affiliated with any company, organization or real-world item, product, or good it may purport to portray.