Tutorials

  • Design & CAD ×
  • Composites ×
  • Engineering Fundamentals ×
  • Autodesk 123D ×
  • IronCAD ×
  • OBJ ×
  • STEP / IGES ×
  • STL ×

Create an OBJ Cube With Your Favorite Images

Anirudh Krishnakumar
in Modeling
17 2 Beginner
Ever wanted to create a CAD file with your favorite pictures? There are many ways to apply images and textures to CAD files. However, for most of these operations, expensive programs or CAD experience might be required. This tutorial shows you how to make a simple OBJ cube, while explaining some of the basic OBJ nomenclature. It then explains the steps to map pictures on the cube's faces. The only tools you will need is a text editor like notepad and your favorite images!
OBJ photo cube cad map texture obj

IronCAD - Top 10 Tips

Nick
in Modeling
3 5 Expert
Ten top tips for IronCAD
IronCAD hints tips ironcad

Top 5 CAD file formats to use!

Kevin Eidsmore
in Design & CAD
2 0 Beginner
Link to YouTube video I made about the 5 best CAD file types to use.
STEP / IGES files recommended best types formats file cad

IronCAD - Using the Co-ordinate system to create a section

Nick
in Modeling
2 0 Intermediate
Use the Co-Ordinate systems to create a section plane. This is a handy alternative the section tool, as it does not cut the solid model.
IronCAD section cross

3D Modeling of a Braitenberg Vehicle in 4 Steps using Autodesk 123D Design

Yoana Ivanova
in Modeling
2 0 Intermediate
This tutorial is suitable for designers who have a basic knowledge of using the open source product Autodesk 123D Design. The steps to build a Breitenberg vehicle are as follows: 1. Modeling a wheel: a cylinder with a diameter of 2 cm and a height of 0.5 cm is placed in the workspace. Drill a hole in it by drawing a circle with a diameter of 0.3 cm and extruding - 0.5 cm with the Extrude tool. We soften the edges of the cylinder with Fillet Radius: 0.5. 2. Clone the wheel: rotate the resulting wheel 90° along the Z axis and copy it with Ctrl+C and Ctrl+V. 3. Modeling the vehicle body: regarding the design of the vehicle body, there are various options. In this case the author models a classic vehicle, which is most often shown in the bibliographic sources. After drawing and extruding a surface with the desired shape we apply Fillet with radius 35 on the back edge and with 30 on the front edge for a contemporary design (i could provide more images if it is needed). On the selected side edges we successively apply Fillet with a radius of 9. 4. Make a special place for the sensor: it is necessary to select the square plane that is located in the middle of the case and successively apply Sketch > Project, Sketch > Offset and Construct > Extrude with a negative value.
Autodesk 123D breitenberg vehicle

How to create a perforated sheet metal

Bob Heijningen
in Design & CAD
1 1 Intermediate
could be that you want to use rectangular patern. by creating one hole and copying it over the surface of the sheet. i actually never use sheet metal parts but here it goes.
IronCAD perforations

how i can get STEP / IGES ???

Amine Mech
in Design & CAD
1 0 Intermediate
STEP / IGES in catia , solidworks , 3ds max , inventor pro .......
STEP / IGES

Is there any chance the 3D Viewer will get "Perspective View Mode" back?

Jitender Chaurasia (JittuARTS)
in Design & CAD
1 0 Intermediate
Follow the below mentioned steps
STL stl view grabcad 3d

main boby

hoang hoa
in Modeling
1 0 Beginner
main boby
STEP / IGES main boby

IRONCAD Training 01-04 | Drag & Drop Modeling

Emil.Rindell
in Modeling
1 0 Beginner
Four videos that describes the Drag & Drop Modeling basics in IRONCAD.
IronCAD training triball easy cad user friendly beginner 3d cad ironcad

Conversion of .STL- & .VRML-files (.WRL) files to 3D-PDF

Pavel Samuta
in Modeling
1 0 Beginner
Free 3D PDF from Revit STL using Meshlab, MiKTeX and U3D-2-PDF
STL conversion 3d-pdf

IronCAD - Linked Cross Sections

Nick
in Modeling
0 0 Intermediate
Create independent parts all driven by the one linked cross section
IronCAD section cross linked ironcad structural

Minimalist Wall Mounts

Alviworld
in Modeling
0 0 Beginner
Hello! im Álvaro Fernández, an artist by heart and a engineer by trade. Im from Concón, a quiet beach city in Chile. In this tutorial Im going to teach you how I make the minimalist stl file I post on this site. Its a begginer tutorial, I encourage to all to try it! you can acomplish it. I use: A pencil. Paper. Rhinoceros 6
STL interiordesign 3dprint oneline diy wallmounts minimalism art rhinoceros

IronCAD - Multifeature part from one Cross Section

Nick
in Modeling
0 0 Intermediate
Create a pipe section with flanges at each end, using one circle to drive the bore diameter with flange OD offset from this.
IronCAD mechanical section cross pipe ironcad
White Stratasys Logo White GrabCAD Logo
© 2024 Stratasys Inc.
ABOUT US
RESOURCES
SOCIAL
Streamline Pro
Control
Print
Shop
PARTNERS
COMMUNITY
Contact Us Website Terms of Use Software Terms of Use Privacy policy Trademarks Your Data on GrabCAD
The Computer-Aided Design ("CAD") files and all associated content posted to this website are created, uploaded, managed and owned by third-party users. Each CAD and any associated text, image or data is in no way sponsored by or affiliated with any company, organization or real-world item, product, or good it may purport to portray.