Tutorials

  • Design & CAD ×
  • Drafting ×
  • Simulation & CAE ×
  • Pro/Engineer Wildfire ×
  • TurboCAD ×
  • GrabCAD Print ×

How to Manage Printer Materials in GrabCAD Shop

Stratasys
in Design & CAD
0 0 Beginner
GrabCAD Shop allows users to manage their 3D printer materials via the Admin Console and the shop itself as an operator. Please note that only admins have access to the Admin Console.
GrabCAD Print print shop materials grabcad shop

Matte or Glossy? Which Finish to Use for Your 3D Prints and When.

Alexa Nahum
in Modeling
9 0 Beginner
Matte or Glossy? That is the question. PolyJet users often ask themselves whether they should print a part with a matte finish or a glossy finish. And not without reason. The type of finish can totally alter the look, feel, color, and even strength and durability of two otherwise identical parts. Each option has its own benefits and implications that need to be considered. In this tutorial we will give an overview of matte and glossy, compare the pros and cons of each, and offer examples that clearly show what each finish type has to contribute. Finally, we will wrap up with a quick breakdown of when to use what.
GrabCAD Print polyjet disadvantages advantages cons pros support glossy matte

can you give drawing models with dimensions to practice?

vigneshwaran I
in Design & CAD
13 0 Intermediate
try
Pro/Engineer Wildfire

How to FDM Print for Part Sliding Clearance

GrabCAD Tutorials
in Assemblies
13 4 Intermediate
If you are 3D printing parts that have to fit/slide together after printing, you will need to put some sort of clearance between those parts in your CAD system. A good starting place is a clearance 2x the layer height you are going to print at, but you should make a few smaller test prints at different clearances to see if the 2x layer height rule holds for your particular situation and orientation. Have fun and happy printing!
GrabCAD Print sliding clearance printing 3d fdm

How to use helical sweep cut to make threads in Pro-E\Creo ??

Saurabh Kumar
in Design & CAD
0 0 Beginner
Ok lets get started... Used a simple bolt....
Pro/Engineer Wildfire helical creo elements sweep threads proe learning

Stacking Your Parts in Z for FDM

Stratasys
in Assemblies
2 0 Intermediate
Have long thin flat parts you’ve always wanted to print right on top of each other in FDM but the slicer never allowed you to? Learn how to use this exclusive new feature in GrabCAD Print Pro!
GrabCAD Print fdm stacking stratasys 3d printing software grabcad print pro

can you give drawing models with dimensions to practice?

khawer mahmood
in Design & CAD
7 0 Intermediate
practice models
Pro/Engineer Wildfire

How do i convert .SLDPRT to .STEP?

Baljeet Thakur
in Design & CAD
0 1 Beginner
Open the .sldprt file in solidworks that you want to save in any other format
Pro/Engineer Wildfire

How to model a Hexagonal Nut in Pro/E?

elamurugabarati
in Design & CAD
0 0 Beginner
here is the step by step instruction to create a hex nut in Pro engineer wildfire 5.0.
Pro/Engineer Wildfire nut hexagonal

how to make pattern along a curve?

Rajesh kumar
in Design & CAD
3 1 Beginner
The answer is here.
Pro/Engineer Wildfire

Tutorial: Welding In Proe

Milan Ilić
in Design & CAD
4 0 Intermediate
Welding in Pro E (Creo 2)
Pro/Engineer Wildfire tutorial enginner pro parametric creo welding

Repeat command in Assembly mode of proEngineer

c0cd00a1
in Design & CAD
0 0 Beginner
Here's a small tutorial on how to use the repeat command in proEngineer assembly mode..If we want to use a bolt of same dimension @ different locations (with same constraints)..then this command proves to be very useful..
Pro/Engineer Wildfire

how to roll back the model in proe5, is there any way like solid works

Charoenpon555
in Design & CAD
1 0 Beginner
See pic.
Pro/Engineer Wildfire

Using a reference image in pro e & creo elements to create a logo or symbol

prabhakaran
in Design & CAD
0 0 Beginner
continue
Pro/Engineer Wildfire reference creo engineer pro importing image import tracing

what is the use of mapkey in pro e or creo elements?

prabhakaran
in Design & CAD
0 0 Beginner
Follow the steps to create a shortcut using mapkey
Pro/Engineer Wildfire
White Stratasys Logo White GrabCAD Logo
© 2024 Stratasys Inc.
ABOUT US
RESOURCES
SOCIAL
Streamline Pro
Control
Print
Shop
PARTNERS
COMMUNITY
Contact Us Website Terms of Use Software Terms of Use Privacy policy Trademarks Your Data on GrabCAD
The Computer-Aided Design ("CAD") files and all associated content posted to this website are created, uploaded, managed and owned by third-party users. Each CAD and any associated text, image or data is in no way sponsored by or affiliated with any company, organization or real-world item, product, or good it may purport to portray.