Tutorials

  • Design & CAD ×
  • Engineering Fundamentals ×
  • Alibre Design ×
  • Autodesk Revit ×
  • BobCAD-CAM ×
  • Powermill ×
  • GrabCAD Print ×

How to FDM Print for Part Sliding Clearance

GrabCAD Tutorials
in Assemblies
13 4 Intermediate
If you are 3D printing parts that have to fit/slide together after printing, you will need to put some sort of clearance between those parts in your CAD system. A good starting place is a clearance 2x the layer height you are going to print at, but you should make a few smaller test prints at different clearances to see if the 2x layer height rule holds for your particular situation and orientation. Have fun and happy printing!
GrabCAD Print sliding clearance printing 3d fdm

Tutorials:-Working with Power MILL "PART IV" Finish Machining Strategies.

Sourbh
in Design & CAD
4 0 Intermediate
Finishing strategies machine the actual component form and where applicable, follow on from the Area Clearance operation. Suitable values are required to control the accuracy and amount of excess material to be left on a component by a tool path. The parameters used for this purpose are called Thickness and Tolerance
Powermill suman sourbh powermill clearance tutorials educational cam power area 3d mill engineering

Make book desk library in Revit

Artistic Design
in Modeling
4 0 Intermediate
Making book desk library in Revit
Autodesk Revit interior design architectural family revit desk book

Skyscraper, High Rise Building

Manish Shripal
in Modeling
3 0 Intermediate
this tutorial is how to design a Skyscraper in Revit Architecture,
Autodesk Revit rise high architect revit skyscraper massing

When the toolpath is to be verified to be checked for gouges?

fariborz
in Design & CAD
2 0 Intermediate
Hello. I hope your answer is yes
Powermill

Stacking Your Parts in Z for FDM

Stratasys
in Assemblies
2 0 Intermediate
Have long thin flat parts you’ve always wanted to print right on top of each other in FDM but the slicer never allowed you to? Learn how to use this exclusive new feature in GrabCAD Print Pro!
GrabCAD Print fdm stacking stratasys 3d printing software grabcad print pro

3D Printable Threads in Alibre Atom 3D and Design Professional

Konstantinos Froudarakis
in Modeling
2 0 Intermediate
In this tutorial you will see how to create fully formed threads for 3D printing in Alibre Atom 3D and Design Professional. If you watch it in YouTube you will also see the cards points to the video that shows the process for Alibre Design Expert.
Alibre Design boolean female male 3d printing 60 degree iso threads

Tutorials:-Working with Power MILL "PART IV" Finish Machining Strategies.

Sourbh
in Design & CAD
2 0 Intermediate
Raster, Radial, Spiral, and Pattern Finishing. Introduction. This section will cover Finishing strategies created by the downward projection of a Pattern, which include four types, Raster, Radial, Spiral and (user defined) Pattern. PowerMILL generates the toolpaths by projecting a wireframe form down the Z-axis onto the model. The standard patterns applied in Raster, Radial, and Spiral are achieved by entering values directly into the Finishing Form. The resultant Pattern can be displayed by selecting Preview before executing the command by selecting Apply. The Pattern option requires a user-defined geometric form (active Pattern), which is projected down Z onto the model as a tool path.
Powermill suman sourbh powermill clearance tutorials educational cam power area 3d mill engineering

problem : powermill changes the orientation of files imoprted in igs format from solidworks

Sourbh
in Design & CAD
1 0 Intermediate
Don't worry about the orientation just simply rotate it through your mouse. and If you are thinking of wrong axis direction than just follow these steps:-
Powermill solidworks powermill

Variable Geometry Patterns

Konstantinos Froudarakis
in Modeling
1 0 Intermediate
Two way to create geometry patterns where every instance has a different geometry. And both ways can do it in a parametrically controlled way.
Alibre Design patterns parametrically controlled variable patterns parametric variable pattern

Exhaust Manifold in ALibre!

Konstantinos Froudarakis
in Modeling
1 0 Intermediate
In this video I show how to design an Exhaust Manifold in Alibre based on a drawing that came up in a question in the Alibre Forums. Enjoy!
Alibre Design sweep direct editing remove face pipe 3d sketch manifold exhaust

Tutorials:-Working with Power MILL "PART V" Toolpath Leads and Links

Sourbh
in Design & CAD
1 0 Intermediate
Hello Friends, This tutorial continues for power mill Guidance.
Powermill paths sourbh powermill lead links tool

Tutorials:-Working with Power MILL "PART V" Toolpath Leads and Links

Sourbh
in Design & CAD
1 0 Intermediate
Z Heights Skim and Plunge distance provide variable control of rapid move heights within a component. These operate in conjunction with Safe Z and Start Z to minimize slow and unnecessary movement of the tool in fresh air while machining the component form. Skim distance – An incremental distance above the model at which rapid moves occur from the end of one tool track to the start of the next. The tool rapids across the model clearing the highest point along its route by the Skim value. Plunge distance – An incremental distance above the local component surface where a downward rapid movement of a tool changes to plunge rate.
Powermill paths sourbh powermill lead links tool
White Stratasys Logo White GrabCAD Logo
© 2024 Stratasys Inc.
ABOUT US
RESOURCES
SOCIAL
Streamline Pro
Control
Print
Shop
PARTNERS
COMMUNITY
Contact Us Website Terms of Use Software Terms of Use Privacy policy Trademarks Your Data on GrabCAD
The Computer-Aided Design ("CAD") files and all associated content posted to this website are created, uploaded, managed and owned by third-party users. Each CAD and any associated text, image or data is in no way sponsored by or affiliated with any company, organization or real-world item, product, or good it may purport to portray.