Tutorials

  • Design & CAD ×
  • Manufacturing & CAM ×
  • Autodesk 123D ×
  • BricsCAD ×
  • Mastercam ×
  • Moi3D ×

Mastercam 2021 (CAD+CAM)

MANOJ VISHWAKARMA
in Modeling
6 2 Intermediate
Mastercam 2021 3D Modeling tutorial
Mastercam cnc cam cad mastercam

How to model a simplified toilet in BricsCAD

2e2bc4ca
in Modeling
3 1 Intermediate
Key commands covered: DMSIMPLIFY Extrude - taper DMTHICKEN ISOLATEOBJECTS HIDEOBJECTS UNISOLATEOBJECTS SolidEdit - Body - seParate Components library (BricsCAD Mechanical only)
BricsCAD potty wc bathroom plumbing bricscad toilet

How do I change the scale in a DXF when I import it into Mastercam?

ady
in Design & CAD
2 1 Beginner
Here is what I did. Sorry about my bad english.
Mastercam neck stratocaster dxf

3D Modeling of a Braitenberg Vehicle in 4 Steps using Autodesk 123D Design

Yoana Ivanova
in Modeling
2 0 Intermediate
This tutorial is suitable for designers who have a basic knowledge of using the open source product Autodesk 123D Design. The steps to build a Breitenberg vehicle are as follows: 1. Modeling a wheel: a cylinder with a diameter of 2 cm and a height of 0.5 cm is placed in the workspace. Drill a hole in it by drawing a circle with a diameter of 0.3 cm and extruding - 0.5 cm with the Extrude tool. We soften the edges of the cylinder with Fillet Radius: 0.5. 2. Clone the wheel: rotate the resulting wheel 90° along the Z axis and copy it with Ctrl+C and Ctrl+V. 3. Modeling the vehicle body: regarding the design of the vehicle body, there are various options. In this case the author models a classic vehicle, which is most often shown in the bibliographic sources. After drawing and extruding a surface with the desired shape we apply Fillet with radius 35 on the back edge and with 30 on the front edge for a contemporary design (i could provide more images if it is needed). On the selected side edges we successively apply Fillet with a radius of 9. 4. Make a special place for the sensor: it is necessary to select the square plane that is located in the middle of the case and successively apply Sketch > Project, Sketch > Offset and Construct > Extrude with a negative value.
Autodesk 123D breitenberg vehicle

Old Fashioned style staircase

2e2bc4ca
in Modeling
1 0 Intermediate
Learn BricsCAD with practical examples. This week, learn how to use advanced modeling techniques to make a set of stairs in CAD. Commands covered: DIV(DIVIDE) AR(ARRAY)/Path AR(ARRAY)/Polar SWEEP REV(REVOLVE) EXT(EXTRUDE)/Both sides 3P(3DPOLY) IAT(IMAGEATTACH)
BricsCAD divide sweep revolve array techniques modeling staircase stairs

how to use rotation in axis like autocad in mastercam

Abdul Haseeb Malik
in Design & CAD
1 0 Intermediate
I never tried MasterCam... may be you will find your answer in this tutorial
Mastercam

How to Download & Install MasterCAM x9

The savvy engineer
in Modeling
1 0 Beginner
How to Download & Install MasterCAM x9
Mastercam mastercam

Tutorial: How to convert spline into a lines and arcs?

ady
in Design & CAD
1 0 Beginner
Another option but in this case I will convert randomly shape splines
Mastercam cadcam mastercam

Tutorial MasteCam 2018 Part 1

Eko Sungkono
in Drafting
1 0 Beginner
Cara Membuat Design Gambar 2D
Mastercam

What is Drawing Intent Recognition option in Bricscad?

Vaidas Guogis
in Design & CAD
0 0 Beginner
Bricscad Platinum provides the ability to edit non-parametric geometry without the need to understand the design history of the geometry. This allows to preserve the correct relationships between selected geometry (e.g., tangency, concentricity, ...) and makes the editing process less time and labor intensive. Design Intent option can be switched on/off and also different recognition options combined at your choice.
BricsCAD drawing option intent recognition

How to sweep object in Bricscad?

Vaidas Guogis
in Design & CAD
0 0 Beginner
It is easy to sweep object using XSWEEP command in Bricscad Platinum.
BricsCAD bricscad sweep object

How to create structural shape in Bricscad?

Vaidas Guogis
in Design & CAD
0 0 Beginner
Bricscad Platinum has X-Hardware library included. You can find shapes, bolts, nuts, washers and other parts inside.
BricsCAD shape structural bricscad creation

Is it possible to apply Direct Modeling features for X-Solids in Bricscad?

Vaidas Guogis
in Design & CAD
0 0 Beginner
Yes, it is possible, but after this kind of editing X-Solid's history will be lost. User must confirm he/she wants to do that.
BricsCAD modeling direct features x-solid

Tutorial MasterCAM Sprocket 35 X 0.5

Muhamad Zen
in Modeling
0 1 Intermediate
Tutorial MasterCAM Sprocket 35 X 0.5
Mastercam mastercam sprocket muhamad_zen12 zen muhamad

Tutorial: How to convert spline into a lines and arcs?

ady
in Design & CAD
0 0 Beginner
For Circle spline.
Mastercam cadcam mastercam
White Stratasys Logo White GrabCAD Logo
© 2024 Stratasys Inc.
ABOUT US
RESOURCES
SOCIAL
Streamline Pro
Control
Print
Shop
PARTNERS
COMMUNITY
Contact Us Website Terms of Use Software Terms of Use Privacy policy Trademarks Your Data on GrabCAD
The Computer-Aided Design ("CAD") files and all associated content posted to this website are created, uploaded, managed and owned by third-party users. Each CAD and any associated text, image or data is in no way sponsored by or affiliated with any company, organization or real-world item, product, or good it may purport to portray.