Tutorials

  • Design & CAD ×
  • Modeling ×
  • Autodesk 123D ×
  • BricsCAD ×
  • IronCAD ×
  • Mastercam ×
  • Powershape ×

Tutorial Camera Mold in PowerShape

Sérgio CAD CAM
in Modeling
18 2 Intermediate
Tutorial Camera Injection Mold in PowerShape from Autodesk; Available to download in https://grabcad.com/library/camera-mold-sergio-cad-cam-1 #tutorial #injection #mold #mould #powershape #surface
Powershape injection molde mould mold powershape tutorial

TUTORIAL SOAP BOX MOLD POWERSHAPE

Sérgio CAD CAM
in Modeling
16 0 Intermediate
TUTORIAL SOAP BOX INJECTION MOLD IN POWERSHAPE; Available to Download in Grabcad: https://grabcad.com/library/soap-box-mold-sergio-cad-cam-1 credits to: https://grabcad.com/library/soapbox-7 by https://grabcad.com/v.rajesh-1 #TUTORIAL #MOLD #MOULD #POWERSHAPE #STEPS
Powershape molde mould powershape tutorial injection mold

Mastercam 2021 (CAD+CAM)

MANOJ VISHWAKARMA
in Modeling
6 2 Intermediate
Mastercam 2021 3D Modeling tutorial
Mastercam cnc cam cad mastercam

How to model a simplified toilet in BricsCAD

2e2bc4ca
in Modeling
3 1 Intermediate
Key commands covered: DMSIMPLIFY Extrude - taper DMTHICKEN ISOLATEOBJECTS HIDEOBJECTS UNISOLATEOBJECTS SolidEdit - Body - seParate Components library (BricsCAD Mechanical only)
BricsCAD potty wc bathroom plumbing bricscad toilet

IronCAD - Top 10 Tips

Nick
in Modeling
3 5 Expert
Ten top tips for IronCAD
IronCAD hints tips ironcad

IronCAD - Using the Co-ordinate system to create a section

Nick
in Modeling
2 0 Intermediate
Use the Co-Ordinate systems to create a section plane. This is a handy alternative the section tool, as it does not cut the solid model.
IronCAD section cross

How do I change the scale in a DXF when I import it into Mastercam?

ady
in Design & CAD
2 1 Beginner
Here is what I did. Sorry about my bad english.
Mastercam neck stratocaster dxf

Bottle - PowerShape Reverse Engineering workflow

Didi Widya Utama
in Modeling
2 0 Intermediate
This video shows workflow of Reverse Engineering Process, start from scanning the physical model and surface creation in Powershape. the scanner i used was Roland Picza 3D scanner if someone interested to learn and try , i could send you the stl scanned data file , just write your request in the comments below hope it, enjoy a happy learning. thanks
Powershape powershape engineering reverse study learning modeling 3d tutorial

3D Modeling of a Braitenberg Vehicle in 4 Steps using Autodesk 123D Design

Yoana Ivanova
in Modeling
2 0 Intermediate
This tutorial is suitable for designers who have a basic knowledge of using the open source product Autodesk 123D Design. The steps to build a Breitenberg vehicle are as follows: 1. Modeling a wheel: a cylinder with a diameter of 2 cm and a height of 0.5 cm is placed in the workspace. Drill a hole in it by drawing a circle with a diameter of 0.3 cm and extruding - 0.5 cm with the Extrude tool. We soften the edges of the cylinder with Fillet Radius: 0.5. 2. Clone the wheel: rotate the resulting wheel 90° along the Z axis and copy it with Ctrl+C and Ctrl+V. 3. Modeling the vehicle body: regarding the design of the vehicle body, there are various options. In this case the author models a classic vehicle, which is most often shown in the bibliographic sources. After drawing and extruding a surface with the desired shape we apply Fillet with radius 35 on the back edge and with 30 on the front edge for a contemporary design (i could provide more images if it is needed). On the selected side edges we successively apply Fillet with a radius of 9. 4. Make a special place for the sensor: it is necessary to select the square plane that is located in the middle of the case and successively apply Sketch > Project, Sketch > Offset and Construct > Extrude with a negative value.
Autodesk 123D breitenberg vehicle

Old Fashioned style staircase

2e2bc4ca
in Modeling
1 0 Intermediate
Learn BricsCAD with practical examples. This week, learn how to use advanced modeling techniques to make a set of stairs in CAD. Commands covered: DIV(DIVIDE) AR(ARRAY)/Path AR(ARRAY)/Polar SWEEP REV(REVOLVE) EXT(EXTRUDE)/Both sides 3P(3DPOLY) IAT(IMAGEATTACH)
BricsCAD divide sweep revolve array techniques modeling staircase stairs

how to use rotation in axis like autocad in mastercam

Abdul Haseeb Malik
in Design & CAD
1 0 Intermediate
I never tried MasterCam... may be you will find your answer in this tutorial
Mastercam

How to create a perforated sheet metal

Bob Heijningen
in Design & CAD
1 1 Intermediate
could be that you want to use rectangular patern. by creating one hole and copying it over the surface of the sheet. i actually never use sheet metal parts but here it goes.
IronCAD perforations

How to Download & Install MasterCAM x9

The savvy engineer
in Modeling
1 0 Beginner
How to Download & Install MasterCAM x9
Mastercam mastercam

Tutorial: How to convert spline into a lines and arcs?

ady
in Design & CAD
1 0 Beginner
Another option but in this case I will convert randomly shape splines
Mastercam cadcam mastercam

IRONCAD Training 01-04 | Drag & Drop Modeling

Emil.Rindell
in Modeling
1 0 Beginner
Four videos that describes the Drag & Drop Modeling basics in IRONCAD.
IronCAD training triball easy cad user friendly beginner 3d cad ironcad
White Stratasys Logo White GrabCAD Logo
© 2024 Stratasys Inc.
ABOUT US
RESOURCES
SOCIAL
Streamline Pro
Control
Print
Shop
PARTNERS
COMMUNITY
Contact Us Website Terms of Use Software Terms of Use Privacy policy Trademarks Your Data on GrabCAD
The Computer-Aided Design ("CAD") files and all associated content posted to this website are created, uploaded, managed and owned by third-party users. Each CAD and any associated text, image or data is in no way sponsored by or affiliated with any company, organization or real-world item, product, or good it may purport to portray.