Tutorials

  • Design & CAD ×
  • Translations ×
  • Pro/Engineer Wildfire ×
  • SolidFace ×
  • VRML / WRL ×

Twisted Pipe 90 deg. bend

Adegbuyi Adeyemi
in Modeling
0 0 Beginner
Creating a 90 degrees twisted pipe. Follow with your own design tool. It's important that the diameter of the guiding torus be >> x 3 pipe dia. The intent is to demonstrate some tools and follow someone to follow with the steps. The steps can be done a lot faster, more efficient manner or using other approaches. Like, share and comment for others to benefit.
VRML / WRL hollow torus bend pipe

Exercise 7 || 90 Degree PVC Equal Tee

Arvind Kumar
in Modeling
0 0 Beginner
Designing 90 Degree PVC Equal Tee using solidwork. A pipe tee is used for distributing or collecting the fluid from the run pipe. It is a short piece of pipe with a 90-degree branch at the center. Two types of Tee are used in piping: Equal / Straight Tee and Reducing / Unequal Tee.
SolidFace designing solidwork 90 degree equal tee equal tee

Tutorial title: SolidFace Professional Training Tutorials #02

SolidFace Technology
in Design & CAD
0 0 Beginner
Welcome to the SolidFace Professional Training! Moving on at our lessons in 2D CAD, we'll get more profound on the commands: Rectangle, Relative Point, Circle, Multiple Lines, Osnap, Centerline, Dimensions, Dimensions Edition. Bem-Vindos ao Treinamento da SolidFace Profissional! Dando continuidade as nossas lições no CAD 2D, os features serão: Rectangle, Relative Point, Circle, Multiple Lines, Osnap, Centerline, Dimensions, Dimensions Edition.
SolidFace drawing engineering software 2d cad 3d tutorial solidface

SolidFace Professional Training Tutorials #01

SolidFace Technology
in Design & CAD
0 0 Beginner
Welcome to the SolidFace Professional Training! This video is an introduction to the SolidFace interface when we'll see some essential functions on the CAD 2D. We'll see the features Line, Multiple Lines, Linear Dimensions, Centerline, and the differences between Parametric and Non-Parametric Dimensions. Bem-Vindos ao Treinamento da SolidFace Profissional! Esse vídeo é uma introdução da interface do SolidFace, onde nós vamos ver algumas funções básicas na parte de CAD 2D, vamos ver os features Line, Multiple Lines, Linear Dimensions, Centerline, e as diferenças entre cotas paramétricas e não paramétricas.
SolidFace engineering tutorial 3d cad 2d software drawing solidface

Smoking Shelter

David Crosby
in Assemblies
1 0 Intermediate
Building the smoking shelter. I have full workshop drawings for making all of the parts. Contact me at gbm60@hotmail.com if you are interested in making the first real one.
Pro/Engineer Wildfire shelter smoking

How to use Welding

Vladimir Palffy
in Assemblies
4 0 Beginner
In the ProE and Creo is possible to create different types of Welds. System automatically calculate with used materials and Weld process. This information is possible to show in the Weld symbol and drawings.
Pro/Engineer Wildfire welding

Make Logo With Pro-E Wildfire 4.

'Bhavesh Shiyani
in Design & CAD
0 0 Beginner
Video is to demonstrate how to make logo with Pro-E Wildfire 4. (Speed Video)
Pro/Engineer Wildfire advanced 3d wildfire pro-e modeling logo

Pro_E Wildfire 4 Modeling Speed Video

'Bhavesh Shiyani
in Design & CAD
0 0 Beginner
This is 3D modeling Speed video of Pro-E Wildfire 4.
Pro/Engineer Wildfire 3d wildfire modeling pro-e

How to analyse Pro Engineer component in Ansys 10.0 welding property?

harikrushna dodiya
in Design & CAD
2 0 Intermediate
u can weld through following step in workbench There are one "WELD" option in geometry. there u can create weld
Pro/Engineer Wildfire property weld

How to Copy-Paste parameters from one part to another in Pro-E?

martin Cronje
in Design & CAD
1 0 Intermediate
It doesn't the parameters if there is a parameter which has a restriction. I've deselected those parameters and copy and paste the rest into the part. You will have to create the restricted parameters yourself.
Pro/Engineer Wildfire values paste parameters copy proe pro pro-e

how to edit extrude without deleting pattern

Huy Pham
in Design & CAD
0 0 Intermediate
I can help you
Pro/Engineer Wildfire

how to do wire rope in pro e

Tushar Wandhare
in Design & CAD
1 1 Intermediate
wire rope can be design by using WRAP command.
Pro/Engineer Wildfire

can you give drawing models with dimensions to practice?

vigneshwaran I
in Design & CAD
13 0 Intermediate
try
Pro/Engineer Wildfire

can you give drawing models with dimensions to practice?

khawer mahmood
in Design & CAD
7 0 Intermediate
practice models
Pro/Engineer Wildfire
White Stratasys Logo White GrabCAD Logo
© 2024 Stratasys Inc.
ABOUT US
RESOURCES
SOCIAL
Streamline Pro
Control
Print
Shop
PARTNERS
COMMUNITY
Contact Us Website Terms of Use Software Terms of Use Privacy policy Trademarks Your Data on GrabCAD
The Computer-Aided Design ("CAD") files and all associated content posted to this website are created, uploaded, managed and owned by third-party users. Each CAD and any associated text, image or data is in no way sponsored by or affiliated with any company, organization or real-world item, product, or good it may purport to portray.