Tutorials

  • Design & CAD ×
  • Snagit ×
  • AutoCAD Electrical ×
  • BlenderCAD ×
  • GrabCAD Print ×

Using Blender for Technical design

Christie S
in Modeling
22 2 Intermediate
Blender 3D may seem for non-user quite difficult to approach, and yet there are a lot of ways to use it accuratly with measures and tree function structure. This tutorial will design a precise screw. It is a near way of approaching technical design. Yes, it will not be as quite easy as solidwork or others, but the aim is to be more precise with blender.
BlenderCAD precise drawing parametric accurate

How to FDM Print for Part Sliding Clearance

GrabCAD Tutorials
in Assemblies
13 4 Intermediate
If you are 3D printing parts that have to fit/slide together after printing, you will need to put some sort of clearance between those parts in your CAD system. A good starting place is a clearance 2x the layer height you are going to print at, but you should make a few smaller test prints at different clearances to see if the 2x layer height rule holds for your particular situation and orientation. Have fun and happy printing!
GrabCAD Print sliding clearance printing 3d fdm

Stacking Your Parts in Z for FDM

Stratasys
in Assemblies
2 0 Intermediate
Have long thin flat parts you’ve always wanted to print right on top of each other in FDM but the slicer never allowed you to? Learn how to use this exclusive new feature in GrabCAD Print Pro!
GrabCAD Print fdm stacking stratasys 3d printing software grabcad print pro

Syed ammal Engineering College Design Blender

vijay
in Modeling
0 0 Intermediate
Syed Ammal Engineering College at Ramanathapuram, a self-financing institution, is one of several educational institutions founded by Dr. E. M. Abdullah. The college is situated in Dr. E. M. Abdullah Campus, about 7 km from Ramanathapuram, towards Madurai, in Tamil Nadu, India.
BlenderCAD blender design building

Tutorial : How to work on Fluid simulation in Blender?

Rahul
in Design & CAD
0 0 Intermediate
following are the links to videos where you can achieve awesome results... Splash Effect - 1 of 2 : http://www.youtube.com/watch?v=Z-DYaxF_rlk Splash Effect - 2 of 2 : http://www.youtube.com/watch?v=j2dJbcTD6j0 Introduction to Blender's Fluid Simulator by Andrew Price http://www.youtube.com/watch?v=b5z70HT6kDw Fluid Simulation in Blender 2.66 http://www.youtube.com/watch?v=dgdGV0yaoM4
BlenderCAD fluid simulation tutorial blender youtube videos blendercad

JP_005_GrabCAD Print: 部品摺動部の隙間をＦＤＭ造形する方法

Stratasys Japan
in Assemblies
0 0 Intermediate
造形後にはめ合わせるまたは摺動（スライド）させる必要がある部品を3D造形する場合、CADシステムで該当する部品の間にある程度の隙間を設ける必要があります。目安として、造形する際の積層ピッチの2倍の隙間から始めるとよいでしょう。ただし、小さいサイズで何度かテスト造形を行い、積層ピッチの2倍の法則が特定の状況や向きに当てはまるかを確認することをお勧めします。それでは3Dプリンタで楽しくモノづくりをしていきましょう！
GrabCAD Print fdm 3d printing clearance sliding
White Stratasys Logo White GrabCAD Logo
© 2024 Stratasys Inc.
ABOUT US
RESOURCES
SOCIAL
Streamline Pro
Control
Print
Shop
PARTNERS
COMMUNITY
Contact Us Website Terms of Use Software Terms of Use Privacy policy Trademarks Your Data on GrabCAD
The Computer-Aided Design ("CAD") files and all associated content posted to this website are created, uploaded, managed and owned by third-party users. Each CAD and any associated text, image or data is in no way sponsored by or affiliated with any company, organization or real-world item, product, or good it may purport to portray.