Tutorials

  • Design & CAD ×
  • AutoCAD Electrical ×
  • Autodesk 123D ×
  • IronCAD ×
  • KeyCreator ×

LUGER 9MM PROJECT

Manolo Valenzuela
in Modeling
13 0 Intermediate
LUGER 9 mm See video. https://youtu.be/ifvvpdlOeuQ
KeyCreator nx12 nx11 solidedge inventor catia solidwork

IronCAD - Top 10 Tips

Nick
in Modeling
3 5 Expert
Ten top tips for IronCAD
IronCAD hints tips ironcad

Electrical Switch

Shubashis Sen
in Design & CAD
2 0 Beginner
In this tutorial, I am going to explain step by step how to design an Electrical switch design in AutoCAD. This is basically for controlling many appliances at the same time. so you can call it a multiple switch box. The measurements are as you want.
AutoCAD Electrical autocad electrical multiple switch electrical switch electrical cad electrical

LAMP DESIGN.

Manolo Valenzuela
in Modeling
2 0 Beginner
LAMP DESIGN. Light & Shadow. See video: https://www.youtube.com/watch?v=esnyU7ws4Fc
KeyCreator metal sheet design lamp solidedge inventor nx12 nx11 catia solidwork

AUTOCAD ELECTRICAL - CUADRO GENERAL DE PROTECCION

Chrisjcm
in Design & CAD
2 2 Beginner
El video esta basado en el ejercicio "Cuadro general de protección" del libro "Automatismos Industriales" de Juan Carlos Martín y María Pilar García, página 94.
AutoCAD Electrical electrical

IronCAD - Using the Co-ordinate system to create a section

Nick
in Modeling
2 0 Intermediate
Use the Co-Ordinate systems to create a section plane. This is a handy alternative the section tool, as it does not cut the solid model.
IronCAD section cross

COVID MASK DESIGN

Manolo Valenzuela
in Modeling
2 0 Beginner
COVID MASK DESIGN See video: https://youtu.be/dUNSE50tm58
KeyCreator design mask covid inventor nx12 nx11 solidedge catia solidworks

AutoCad Electrical-2018 for Students,Beginners

Prajwith Ullal
in Modeling
2 0 Beginner
Autocad Electrical-2018 2D design Tutorial. I am Electrical Engineering Student from Karnataka(India), As a learner I have started creating tutorial, Please support me to grow up, please comment your suggestions. share the tutorial with your friends circle. Thank You.
AutoCAD Electrical electrical students autocad

3D Modeling of a Braitenberg Vehicle in 4 Steps using Autodesk 123D Design

Yoana Ivanova
in Modeling
2 0 Intermediate
This tutorial is suitable for designers who have a basic knowledge of using the open source product Autodesk 123D Design. The steps to build a Breitenberg vehicle are as follows: 1. Modeling a wheel: a cylinder with a diameter of 2 cm and a height of 0.5 cm is placed in the workspace. Drill a hole in it by drawing a circle with a diameter of 0.3 cm and extruding - 0.5 cm with the Extrude tool. We soften the edges of the cylinder with Fillet Radius: 0.5. 2. Clone the wheel: rotate the resulting wheel 90° along the Z axis and copy it with Ctrl+C and Ctrl+V. 3. Modeling the vehicle body: regarding the design of the vehicle body, there are various options. In this case the author models a classic vehicle, which is most often shown in the bibliographic sources. After drawing and extruding a surface with the desired shape we apply Fillet with radius 35 on the back edge and with 30 on the front edge for a contemporary design (i could provide more images if it is needed). On the selected side edges we successively apply Fillet with a radius of 9. 4. Make a special place for the sensor: it is necessary to select the square plane that is located in the middle of the case and successively apply Sketch > Project, Sketch > Offset and Construct > Extrude with a negative value.
Autodesk 123D breitenberg vehicle

How to do a TRIFOIL KNOT DESIGN

Manolo Valenzuela
in Modeling
1 1 Beginner
See video. https://www.youtube.com/edit?o=U&video_id=ki-eW7W6Bnc
KeyCreator nx catia solidedge inventor solidworks

How to create a perforated sheet metal

Bob Heijningen
in Design & CAD
1 1 Intermediate
could be that you want to use rectangular patern. by creating one hole and copying it over the surface of the sheet. i actually never use sheet metal parts but here it goes.
IronCAD perforations

PLASTIC COVER & MOLD

Manolo Valenzuela
in Modeling
1 2 Beginner
PLASTIC COVER & MOLD See video: https://youtu.be/GIDRJFsyOpY
KeyCreator tutorial design mold nx inventor solidedge solidwork catia

INVENTOR TO AUTOCAD ELECTRICAL

Chrisjcm
in Design & CAD
1 0 Beginner
Creación de un esquema punto a punto en AUTOCAD ELECTRICAL desde un archivo XML generado en INVENTOR
AutoCAD Electrical inventor electrical autocad

IRONCAD Training 01-04 | Drag & Drop Modeling

Emil.Rindell
in Modeling
1 0 Beginner
Four videos that describes the Drag & Drop Modeling basics in IRONCAD.
IronCAD training triball easy cad user friendly beginner 3d cad ironcad
White Stratasys Logo White GrabCAD Logo
© 2024 Stratasys Inc.
ABOUT US
RESOURCES
SOCIAL
Streamline Pro
Control
Print
Shop
PARTNERS
COMMUNITY
Contact Us Website Terms of Use Software Terms of Use Privacy policy Trademarks Your Data on GrabCAD
The Computer-Aided Design ("CAD") files and all associated content posted to this website are created, uploaded, managed and owned by third-party users. Each CAD and any associated text, image or data is in no way sponsored by or affiliated with any company, organization or real-world item, product, or good it may purport to portray.