Tutorials

  • Design & CAD ×
  • Snagit ×
  • Autodesk 123D ×
  • Bentley MicroStation ×
  • STL ×

3D Modeling of a Braitenberg Vehicle in 4 Steps using Autodesk 123D Design

Yoana Ivanova
in Modeling
2 0 Intermediate
This tutorial is suitable for designers who have a basic knowledge of using the open source product Autodesk 123D Design. The steps to build a Breitenberg vehicle are as follows: 1. Modeling a wheel: a cylinder with a diameter of 2 cm and a height of 0.5 cm is placed in the workspace. Drill a hole in it by drawing a circle with a diameter of 0.3 cm and extruding - 0.5 cm with the Extrude tool. We soften the edges of the cylinder with Fillet Radius: 0.5. 2. Clone the wheel: rotate the resulting wheel 90° along the Z axis and copy it with Ctrl+C and Ctrl+V. 3. Modeling the vehicle body: regarding the design of the vehicle body, there are various options. In this case the author models a classic vehicle, which is most often shown in the bibliographic sources. After drawing and extruding a surface with the desired shape we apply Fillet with radius 35 on the back edge and with 30 on the front edge for a contemporary design (i could provide more images if it is needed). On the selected side edges we successively apply Fillet with a radius of 9. 4. Make a special place for the sensor: it is necessary to select the square plane that is located in the middle of the case and successively apply Sketch > Project, Sketch > Offset and Construct > Extrude with a negative value.
Autodesk 123D breitenberg vehicle

Is there any chance the 3D Viewer will get "Perspective View Mode" back?

Jitender Chaurasia (JittuARTS)
in Design & CAD
1 0 Intermediate
Follow the below mentioned steps
STL stl view grabcad 3d

Conversion of .STL- & .VRML-files (.WRL) files to 3D-PDF

Pavel Samuta
in Modeling
1 0 Beginner
Free 3D PDF from Revit STL using Meshlab, MiKTeX and U3D-2-PDF
STL conversion 3d-pdf

Minimalist Wall Mounts

Alviworld
in Modeling
0 0 Beginner
Hello! im Álvaro Fernández, an artist by heart and a engineer by trade. Im from Concón, a quiet beach city in Chile. In this tutorial Im going to teach you how I make the minimalist stl file I post on this site. Its a begginer tutorial, I encourage to all to try it! you can acomplish it. I use: A pencil. Paper. Rhinoceros 6
STL interiordesign 3dprint oneline diy wallmounts minimalism art rhinoceros
White Stratasys Logo White GrabCAD Logo
© 2024 Stratasys Inc.
ABOUT US
RESOURCES
SOCIAL
Streamline Pro
Control
Print
Shop
PARTNERS
COMMUNITY
Contact Us Website Terms of Use Software Terms of Use Privacy policy Trademarks Your Data on GrabCAD
The Computer-Aided Design ("CAD") files and all associated content posted to this website are created, uploaded, managed and owned by third-party users. Each CAD and any associated text, image or data is in no way sponsored by or affiliated with any company, organization or real-world item, product, or good it may purport to portray.