Tutorials

  • Design & CAD ×
  • Snagit ×
  • Autodesk Maya ×
  • Autodesk 123D ×
  • BricsCAD ×

Building Mini Morris Cooper

PabloModelkits
in Modeling
7 3 Expert
Insane detail level modeling this Mini Morris Cooper. Leave you comments and questions, I will be happy to answer.
Autodesk Maya montecarlo rally iconic car classic cooper morris mini automotive

Junk sail boat | 3d modeling timelapse

PabloModelkits
in Modeling
3 0 Expert
Time lapse 3d modeling of a Junk Sail Boat. Feel free to leave you comments!
Autodesk Maya maya autodesk modeling 3d boat sail junk

How to model a simplified toilet in BricsCAD

2e2bc4ca
in Modeling
3 1 Intermediate
Key commands covered: DMSIMPLIFY Extrude - taper DMTHICKEN ISOLATEOBJECTS HIDEOBJECTS UNISOLATEOBJECTS SolidEdit - Body - seParate Components library (BricsCAD Mechanical only)
BricsCAD potty wc bathroom plumbing bricscad toilet

Volkswagen Van Type 23 | Time lapse

PabloModelkits
in Modeling
2 0 Expert
Here is a van that reminds to peace the Volkswagen Type 23.
Autodesk Maya lapse time van 23 type volkswagen

KTM (Streetfighter )

I'M A DESIGNER
in Modeling
2 0 Expert
Tuto n°61 - KTM (Streetfighter ) sur Autodesk Maya https://www.youtube.com/watch?v=8vGN83WWMIc
Autodesk Maya

Bristol 450 2L. Time lapse modeling

PabloModelkits
in Modeling
2 0 Expert
Rare care that participate in Le Mans. Team: Bristol Aeroplane Co. Le Mans 24 Hours (June 11 - 12) Drivers: Peter S. Wilson & Jim Mayers
Autodesk Maya maya autodesk modeling mans le 450 car bristol

3D Modeling of a Braitenberg Vehicle in 4 Steps using Autodesk 123D Design

Yoana Ivanova
in Modeling
2 0 Intermediate
This tutorial is suitable for designers who have a basic knowledge of using the open source product Autodesk 123D Design. The steps to build a Breitenberg vehicle are as follows: 1. Modeling a wheel: a cylinder with a diameter of 2 cm and a height of 0.5 cm is placed in the workspace. Drill a hole in it by drawing a circle with a diameter of 0.3 cm and extruding - 0.5 cm with the Extrude tool. We soften the edges of the cylinder with Fillet Radius: 0.5. 2. Clone the wheel: rotate the resulting wheel 90° along the Z axis and copy it with Ctrl+C and Ctrl+V. 3. Modeling the vehicle body: regarding the design of the vehicle body, there are various options. In this case the author models a classic vehicle, which is most often shown in the bibliographic sources. After drawing and extruding a surface with the desired shape we apply Fillet with radius 35 on the back edge and with 30 on the front edge for a contemporary design (i could provide more images if it is needed). On the selected side edges we successively apply Fillet with a radius of 9. 4. Make a special place for the sensor: it is necessary to select the square plane that is located in the middle of the case and successively apply Sketch > Project, Sketch > Offset and Construct > Extrude with a negative value.
Autodesk 123D breitenberg vehicle

Old Fashioned style staircase

2e2bc4ca
in Modeling
1 0 Intermediate
Learn BricsCAD with practical examples. This week, learn how to use advanced modeling techniques to make a set of stairs in CAD. Commands covered: DIV(DIVIDE) AR(ARRAY)/Path AR(ARRAY)/Polar SWEEP REV(REVOLVE) EXT(EXTRUDE)/Both sides 3P(3DPOLY) IAT(IMAGEATTACH)
BricsCAD divide sweep revolve array techniques modeling staircase stairs

Modeling Windmill time lapse

PabloModelkits
in BOM
1 0 Expert
Building a windmill with volumetric light in Autodesk Maya.
Autodesk Maya autodesk maya light volumetric windmill

What is Drawing Intent Recognition option in Bricscad?

Vaidas Guogis
in Design & CAD
0 0 Beginner
Bricscad Platinum provides the ability to edit non-parametric geometry without the need to understand the design history of the geometry. This allows to preserve the correct relationships between selected geometry (e.g., tangency, concentricity, ...) and makes the editing process less time and labor intensive. Design Intent option can be switched on/off and also different recognition options combined at your choice.
BricsCAD drawing option intent recognition

How to sweep object in Bricscad?

Vaidas Guogis
in Design & CAD
0 0 Beginner
It is easy to sweep object using XSWEEP command in Bricscad Platinum.
BricsCAD bricscad sweep object
White Stratasys Logo White GrabCAD Logo
© 2024 Stratasys Inc.
ABOUT US
RESOURCES
SOCIAL
Streamline Pro
Control
Print
Shop
PARTNERS
COMMUNITY
Contact Us Website Terms of Use Software Terms of Use Privacy policy Trademarks Your Data on GrabCAD
The Computer-Aided Design ("CAD") files and all associated content posted to this website are created, uploaded, managed and owned by third-party users. Each CAD and any associated text, image or data is in no way sponsored by or affiliated with any company, organization or real-world item, product, or good it may purport to portray.