Tutorials

  • Drafting ×
  • Assemblies ×
  • Autodesk Inventor ×
  • Delmia ×
  • KeyShot ×
  • Mastercam ×
  • TopSolid ×

Cap screws and machine screws

dea
in Drafting
65 12 Intermediate
Cap screws and machine screws are similar in shape, differing only in their relative sizes. Machine screws are usually smaller in size, compared to cap screws. These are used for fastening two parts, one with clearance hole and the other with tapped hole. The clearance of the unthreaded hole need not be shown on the drawing as its presence is obvious. Figure 5.24 shows different types of cap and machine screws, with proportions marked Cap screws are produced in finish form and are used on machines where accuracy and appearance are important. As cap screws are inferior to studs, they are used only on machines requiring few adjustments and are not suitable where frequent removal is necessary. These are produced in different diameters, upto a maximum of 100 mm and lengths 250 mm. Machine screws are produced with a naturally bright finish and are not heat treated. They are particularly adopted for screwing into thin materials and the smaller ones are threaded throughout the length. They are used in fire-arms, jigs, fixture and dies. They are produced in different diameters upto a maximum of 20 mm and lengths upto 50 mm.
Autodesk Inventor screw cap

Inventor 2021 | Radial Engine | Assembly 9

CAD Pond
in Assemblies
11 3 Beginner
In this video, I demonstrated the assembly of the cylinders and pistons with the crank case used in a typical radial engine. Video demonstrations to the parts used, can be found on my youtube channel linked in my profile. Happy Modeling!
Autodesk Inventor airbus inventor engine radial aviation boeing airforce aircraft

Car holder - Inventor

Mayara Gualberto
in Assemblies
10 2 Beginner
Step-by-step tutorial for modeling and assembling the car holder in Autodesk Inventor software
Autodesk Inventor easy autodesk inventor car

Inventor 2021 | Radial Aircraft Engine | Assembly 10

CAD Pond
in Assemblies
1 2 Beginner
In this video, I demonstrate the process of creating the suction housing subassembly of the radial aircraft engine project. Video demonstrations to the parts used, can be found on my youtube channel linked in my profile. Happy Modeling!
Autodesk Inventor airbus inventor engine radial aviation boeing airforce aircraft

Inventor Delete Constraints.

Harm chang woo
in Drafting
0 1 Beginner
Inventor Delete Constraints.
Autodesk Inventor inventor 2023 inventor 2022

Pantograf

Paraschiv Alex
in Assemblies
1 1 Beginner
I created this project, as homework at :„Proiectare 3D Parametrică 1”, Masterat IAAC, IMST-UPB, Universitary year 2016-2017. I made this project in INVENTOR 2015. The starting point of this project was: https://www.youtube.com/watch?v=oWQ2K6HjP_w&feature=youtu.be You can see the assembling animation here:https://youtu.be/t1drcxyktJs You can see the functioning animation here: https://youtu.be/QHBBkQ5zLl4
Autodesk Inventor https-youtu-be-qhbbkq5zll4

Inventor 2021 | Radial Engine

CAD Pond
in Assemblies
5 1 Beginner
Radial engine model created with Inventor. 3D Model. Art.
Autodesk Inventor airbus tutorial inventor engine radial aviation boeing airforce aircraft

Create blue print by Autodesk Inventor

Ebrahim Zokaee
in Drafting
2 1 Intermediate
In this tutorial, study how to create a blue print by Autodesk inventor.
Autodesk Inventor inventor drafting blue print

Assembly of a belt roller support

Paul Owiredu
in Assemblies
1 1 Intermediate
In this video, i assemble step-by-step a belt roller support in Autodesk Inventor
Autodesk Inventor autodesk inventor assemblies

Inventor 2021 | Radial Engine | Assembly 15

CAD Pond
in Assemblies
2 1 Beginner
In this video, I complete the assembly of the radial engine project. Parts used in this video are referenced below. Happy Modeling!
Autodesk Inventor tutorial inventor engine radial aviation boeing airforce aircraft

Autodesk Inventor 2021. Ilogic. How to hide annotations

Alexey Z Buchas
in Assemblies
0 1 Beginner
How to hide or show annotations in assemblies using ilogic.
Autodesk Inventor

Bicycle Animation, Exploded View & Bicycle Animation

Farhandany _
in Assemblies
4 1 Beginner
BMX began in the early 1970s, when children started cycling on dirt roads in Southern California, inspired by the popular sport of motocross at the time. One of the bikes available at the time, the Schwinn Sting-Ray became the choice, because it had a motocross-like frame shape, 20-inch tires, high handlebars, long seats, and was easy to modify for good control and performance on dirt roads. . This bicycle phenomenon has become very widespread since its appearance in the film "On Any Sunday" in the United States, a documentary about motocross in 1971. In the opening scene, it shows children riding Schwinn Stingrays bicycles on off-road roads, which inspires BMX sports and racing. By the middle of the decade, the sport of BMX had a lot of interest, and factories began to produce bicycles specifically designed for this sport.
Autodesk Inventor

Inventor assemblies.

Harm chang woo
in Assemblies
0 0 Beginner
Assembly method using inventory design frame and tube and pipe tools. A simple rendering method using Keyshot 9. Model link is https://grabcad.com/library/55-gallon-barrel-1
Autodesk Inventor

Inventor 2021 | Radial Engine | Assembly 12

CAD Pond
in Assemblies
1 0 Beginner
In this video, I demonstrate how to attach the intake and exhaust subassemblies, along with other parts to the crank subassembly of the radial engine project. Parts used in this video are referenced below.
Autodesk Inventor tutorial inventor engine radial aviation boeing airforce aircraft
White Stratasys Logo White GrabCAD Logo
© 2024 Stratasys Inc.
ABOUT US
RESOURCES
SOCIAL
Streamline Pro
Control
Print
Shop
PARTNERS
COMMUNITY
Contact Us Website Terms of Use Software Terms of Use Privacy policy Trademarks Your Data on GrabCAD
The Computer-Aided Design ("CAD") files and all associated content posted to this website are created, uploaded, managed and owned by third-party users. Each CAD and any associated text, image or data is in no way sponsored by or affiliated with any company, organization or real-world item, product, or good it may purport to portray.