Tutorials

  • Drafting ×
  • Snagit ×
  • Autodesk Inventor ×
  • FreeCAD ×
  • NX Unigraphics ×
  • Parasolid ×

Cap screws and machine screws

dea
in Drafting
65 12 Intermediate
Cap screws and machine screws are similar in shape, differing only in their relative sizes. Machine screws are usually smaller in size, compared to cap screws. These are used for fastening two parts, one with clearance hole and the other with tapped hole. The clearance of the unthreaded hole need not be shown on the drawing as its presence is obvious. Figure 5.24 shows different types of cap and machine screws, with proportions marked Cap screws are produced in finish form and are used on machines where accuracy and appearance are important. As cap screws are inferior to studs, they are used only on machines requiring few adjustments and are not suitable where frequent removal is necessary. These are produced in different diameters, upto a maximum of 100 mm and lengths 250 mm. Machine screws are produced with a naturally bright finish and are not heat treated. They are particularly adopted for screwing into thin materials and the smaller ones are threaded throughout the length. They are used in fire-arms, jigs, fixture and dies. They are produced in different diameters upto a maximum of 20 mm and lengths upto 50 mm.
Autodesk Inventor screw cap

(VIDEO) NX CAD Drafting Tutorials

Diyanshu Singh
in Drafting
11 0 Intermediate
Learn basic drafting NXCAD.
NX Unigraphics drawing drafting nxcad

Universal Joint Design In Nx

Anup Chauhan
in Drafting
4 0 Intermediate
universal joints parts and assembly https://www.instagram.com/p/CpsYpDtqoQ5/ files: https://grabcad.com/library/universal-joint-426 original design: Na CAD 2007
NX Unigraphics nx cad automotive automobile

Create blue print by Autodesk Inventor

Ebrahim Zokaee
in Drafting
2 1 Intermediate
In this tutorial, study how to create a blue print by Autodesk inventor.
Autodesk Inventor inventor drafting blue print

Auto Ballooning NX2007 (2022)

Jay Raj
in Drafting
1 0 Intermediate
Hello Everybody, Welcome to Mech Dezignz. Today we will se how to add part list and add ballooning to the views in assembly. So lets begin... So this is in assembly format. So that we can do ballooning and drafting partwise... First of all we will go to drafting... So after putting the view we will go to part list... To set the length of the table we have to go to part list properties... So by increasing the height the contents can be adjusted in single table... Now for ballooning, we can add the auto balloon to any view which have been imported... So by right clicking and choosing show balloon we can do auto ballooning... We can adjust the balloons as required by stretching or double clicking to add or modify contents... Since this is latest NX some commands may be different than older version... Any queries can be carried on to the comments section... Thanks Have a nice day...
NX Unigraphics reverse engineering cad nx 2d 3d drafting nx2022 nx2007
White Stratasys Logo White GrabCAD Logo
© 2024 Stratasys Inc.
ABOUT US
RESOURCES
SOCIAL
Streamline Pro
Control
Print
Shop
PARTNERS
COMMUNITY
Contact Us Website Terms of Use Software Terms of Use Privacy policy Trademarks Your Data on GrabCAD
The Computer-Aided Design ("CAD") files and all associated content posted to this website are created, uploaded, managed and owned by third-party users. Each CAD and any associated text, image or data is in no way sponsored by or affiliated with any company, organization or real-world item, product, or good it may purport to portray.