Tutorials

  • BOM ×
  • FEM ×
  • Process ×
  • AutoCAD ×
  • Fusion 360 ×
  • Kompas-3D ×
  • SOLIDWORKS ×
  • VectorWorks ×
  • GrabCAD Community ×

I Built a Military Robot

Engineering Juice
in Process
43 6 Intermediate
Mobile, military robot optimized for use in desert environments which can be controlled remotely or autonomously and can collect/ stream video to a VR headset via its front mounted camera. The method of movement is a continuous track, created using steel roller chain connected by fasteners with 3D printed links. These loops sit on a custom designed drive sprocket and idler sprocket with 4 shock absorber loaded roller pins that act as the suspension system. The drive motors are powered by '18650' batteries, directed by a raspberry pi 4 and connected to a motor controller. For connectivity, a mobile device can connect to the pi's external antenna as it is a WiFi access point. From here, directions can be sent to the robot from the mobile device using the Node Red GUI and additionally, the entirety of the main raspberry pi computer can be accessed for the use of sending custom commands for autonomous movement.
Fusion 360 printed 3d rc programming pi raspberry electronics 360 fusion robot robotics

How to design Complete Robot using Voice Assistant like JARVIS in Fusion 360

Rugved Chavan
in Process
14 1 Intermediate
4-wheeled Robot Design Frame is 3D printable. Components - 1. Raspberry pi 4 2. Sony WebCam 3. Normal 3.5 mm jack Speaker 4. Custom Frame 5. MI 20000 mAh powerbank 6. 100 RPM Dual Shaft BO Motor - Straight with wheels Custom Voice Assistance code is running in background. Voice assistance code is connected with database which is having values like quantity and dimensions of components. Mail me for Jarvis source code. Like this video... 🤘
Fusion 360 automation electronics robots arduino engineering technology robot robotics

Solidworks Simulations |Non linear structural analysis of a lever machine

Ahmed Sakib
in FEM
3 0 Intermediate
Non linear static analysis of a lever machine will be carried out with Solidworks simulation module. @cadingal 0:11 Download Solidworks CAD Model of lever assembly 0:17 Start static simulation study 0:47 Define connections 01:16 Define loads & fixtures 02:05 Non linear analysis settings 02:38 Evaluate stress and deformation
SOLIDWORKS lever assembly fem solidowrks non linear static analysis solidworks non linear simulation

Using Design Tables to Create Cut Lists in BOM

Thomas Larson
in BOM
2 1 Intermediate
Creating a smarter parts with configuration properties and design tables also the dimensions to be listed in a Bill of Materials. This can be used for cut lists, material ordering etc. Parts Found at: https://grabcad.com/library/cabinet-for-tutorial-1
SOLIDWORKS custom properties design tables automation cut list bom

solidworks BOM

taufik .
in BOM
0 0 Intermediate
Calculation of material requirements for disolidworks
SOLIDWORKS materials bill drawing bom solidworks

Insert Bill of Material into a Drawing in Solidworks| Custom Properties with Bill of Material | SW BOM

Ibrahim Omer
in BOM
0 0 Intermediate
In this tutorial, we will learn how to insert Bill of Materials (BOM) into a drawing in Solidworks. I am using an example of a piston assembly consisting of four parts. For the sake of simplicity I am only using four parts. These four parts are: a) Connecting Rod b) Crankshaft c) Gudgeon Pin d) Piston In the first part, we will generate BOM and in the 2nd part we will link our parts with BOM using custom properties. The advantage of using this in BOM is, it is parametric. If I change a material of say gudgeon pin, the material in BOM will also change. I have shown this in the last part of the video. I have also covered how to apply balloon in solidworks drawing. How to edit drawing title etc. and much more. #billofmaterialsolidworks #creatinglinkbetweenpartanddrawingsolidworks #solidworkscustomproperties #CADable #solidworksbillofmaterialtutorial For Files: https://grabcad.com/library/automobile-engine-7 Kindly Subscribe our Channel for more Videos and Projects in SOLIDWORKS, Keyshot, AutoCAD etc.
SOLIDWORKS bill of material customization insert bill of materials in solidworks custom property solidworks sw bom solidworks bill of material
White Stratasys Logo White GrabCAD Logo
© 2024 Stratasys Inc.
ABOUT US
RESOURCES
SOCIAL
Streamline Pro
Control
Print
Shop
PARTNERS
COMMUNITY
Contact Us Website Terms of Use Software Terms of Use Privacy policy Trademarks Your Data on GrabCAD
The Computer-Aided Design ("CAD") files and all associated content posted to this website are created, uploaded, managed and owned by third-party users. Each CAD and any associated text, image or data is in no way sponsored by or affiliated with any company, organization or real-world item, product, or good it may purport to portray.