Tutorials

  • Modeling ×
  • Assemblies ×
  • Manufacturing & CAM ×
  • ArchiCAD ×
  • AutoCAD Electrical ×
  • Autodesk 123D ×
  • BricsCAD ×
  • JT ×
  • Moi3D ×
  • TinkerCAD ×
  • Rendering ×

Make a Motorcycle in TinkerCAD

Mike Harmon
in Modeling
3 0 Beginner
Design a motorcycle in TinkerCAD. Step by Step instructions that are written for middle school aged students. If you have dual screens, watch on one, complete on the other. Otherwise, watch a little, then do a little. If you make something awesome, share an image @HLModtech on Instagram, Facebook or Twitter.
TinkerCAD skills basic easy beginner

How to model a simplified toilet in BricsCAD

2e2bc4ca
in Modeling
3 1 Intermediate
Key commands covered: DMSIMPLIFY Extrude - taper DMTHICKEN ISOLATEOBJECTS HIDEOBJECTS UNISOLATEOBJECTS SolidEdit - Body - seParate Components library (BricsCAD Mechanical only)
BricsCAD potty wc bathroom plumbing bricscad toilet

scaling in Tinker CAD

Gabriel Gustafson
in Modeling
3 1 Beginner
How to use TinkerCAD.
TinkerCAD

AutoCad Electrical-2018 for Students,Beginners

Prajwith Ullal
in Modeling
2 0 Beginner
Autocad Electrical-2018 2D design Tutorial. I am Electrical Engineering Student from Karnataka(India), As a learner I have started creating tutorial, Please support me to grow up, please comment your suggestions. share the tutorial with your friends circle. Thank You.
AutoCAD Electrical electrical students autocad

3D Modeling of a Braitenberg Vehicle in 4 Steps using Autodesk 123D Design

Yoana Ivanova
in Modeling
2 0 Intermediate
This tutorial is suitable for designers who have a basic knowledge of using the open source product Autodesk 123D Design. The steps to build a Breitenberg vehicle are as follows: 1. Modeling a wheel: a cylinder with a diameter of 2 cm and a height of 0.5 cm is placed in the workspace. Drill a hole in it by drawing a circle with a diameter of 0.3 cm and extruding - 0.5 cm with the Extrude tool. We soften the edges of the cylinder with Fillet Radius: 0.5. 2. Clone the wheel: rotate the resulting wheel 90° along the Z axis and copy it with Ctrl+C and Ctrl+V. 3. Modeling the vehicle body: regarding the design of the vehicle body, there are various options. In this case the author models a classic vehicle, which is most often shown in the bibliographic sources. After drawing and extruding a surface with the desired shape we apply Fillet with radius 35 on the back edge and with 30 on the front edge for a contemporary design (i could provide more images if it is needed). On the selected side edges we successively apply Fillet with a radius of 9. 4. Make a special place for the sensor: it is necessary to select the square plane that is located in the middle of the case and successively apply Sketch > Project, Sketch > Offset and Construct > Extrude with a negative value.
Autodesk 123D breitenberg vehicle

fluent simulation

meysam
in Assemblies
2 0 Beginner
visit site: https://alfaproject.ir/fluent-proje/
ArchiCAD

ADOBE PHOTOSHOP TUTORIAL - How to prepare decals for Rendering

ioan skurka
in Modeling
2 2 Beginner
ADOBE PHOTOSHOP TUTORIAL How to prepare decals for Rendering
Rendering photoshop decals rendering

Old Fashioned style staircase

2e2bc4ca
in Modeling
1 0 Intermediate
Learn BricsCAD with practical examples. This week, learn how to use advanced modeling techniques to make a set of stairs in CAD. Commands covered: DIV(DIVIDE) AR(ARRAY)/Path AR(ARRAY)/Polar SWEEP REV(REVOLVE) EXT(EXTRUDE)/Both sides 3P(3DPOLY) IAT(IMAGEATTACH)
BricsCAD divide sweep revolve array techniques modeling staircase stairs

How to create Keyshot Render in 6 Simple Step

ismail_akar
in Modeling
1 0 Beginner
How to create Keyshot Render in 6 Simple Step In this video you can learn how to make Keyshot Render on basic level. https://www.3dcatia.com
Rendering model 3d rendering render keyshot

FREE - TINKERCAD - TUTORIAL

nikhil satpute
in Modeling
1 0 Beginner
Don't need to download any software, it is freely available online This tutorial will help to design 3D blocks very easily , just go through my video lectures on Tinkercad on my youtube channel
TinkerCAD technicaldrawing engineeringdrawing engineering tinkercad

Autodesk TinkerCAD Basics

A VIJAY
in Modeling
1 1 Expert
Hello my name is Vijay and I am a designer in TinkerCAD. This tutorial is to learn the basics of TinkerCAD from Noob to proffesional.You can also ask any questions regarding in the designing of TinkerCAD.
TinkerCAD
White Stratasys Logo White GrabCAD Logo
© 2024 Stratasys Inc.
ABOUT US
RESOURCES
SOCIAL
Streamline Pro
Control
Print
Shop
PARTNERS
COMMUNITY
Contact Us Website Terms of Use Software Terms of Use Privacy policy Trademarks Your Data on GrabCAD
The Computer-Aided Design ("CAD") files and all associated content posted to this website are created, uploaded, managed and owned by third-party users. Each CAD and any associated text, image or data is in no way sponsored by or affiliated with any company, organization or real-world item, product, or good it may purport to portray.