Tutorials

  • Drafting ×
  • Dimensioning / Tolerancing ×
  • NC Machining ×
  • Autodesk Inventor ×
  • JT ×
  • KeyCreator ×
  • Onshape ×
  • SOLIDWORKS ×
  • GrabCAD Print ×

Cap screws and machine screws

dea
in Drafting
65 12 Intermediate
Cap screws and machine screws are similar in shape, differing only in their relative sizes. Machine screws are usually smaller in size, compared to cap screws. These are used for fastening two parts, one with clearance hole and the other with tapped hole. The clearance of the unthreaded hole need not be shown on the drawing as its presence is obvious. Figure 5.24 shows different types of cap and machine screws, with proportions marked Cap screws are produced in finish form and are used on machines where accuracy and appearance are important. As cap screws are inferior to studs, they are used only on machines requiring few adjustments and are not suitable where frequent removal is necessary. These are produced in different diameters, upto a maximum of 100 mm and lengths 250 mm. Machine screws are produced with a naturally bright finish and are not heat treated. They are particularly adopted for screwing into thin materials and the smaller ones are threaded throughout the length. They are used in fire-arms, jigs, fixture and dies. They are produced in different diameters upto a maximum of 20 mm and lengths upto 50 mm.
Autodesk Inventor screw cap

Some concepts about DIN 5480 spline dimension Part 1

Carlos Soler
in Dimensioning / Tolerancing
35 8 Expert
For some questions that I received. I will upload some tutorials about DIN 5480 dimensions. This is a tutorial explaining some concepts on dimensions of the splines ruled by DIN 5480
SOLIDWORKS clearance tolerance reference diameter dimension din 5480

Solidworks Tutorial # 236 How to Design a Industrials Bin in Sheet Metal by SW Easy Design

Praveen Kumar
in Drafting
22 0 Intermediate
M.K. Engineering Workshop GST : 09BETPM3972F1ZW Please any Manufacturing requirement in Rice Mill, Floor Mill, Dall Mill, any Related Product. Design By- Praveen Kumar-Email ID- acadone.edu@gmail.com Note- All Model is a Basic Model But Our Workshop Make a Fully Define Model..... if You interested our model then Contact me by Mail.... We Provide SolidWorks, Auto-CAD,(Mechanical Drawing 3D Design,Catia V5......etc Software Free Tutorials. You can subscribe our channel to get more information. Solidworks Easy Design Channel: Tutorials for SolidWorks on many levels and subjects Covering most of the SolidWorks fields - SolidWorks Features - SolidWorks for Beginners - SolidWorks Advanced - SolidWorks Simulation - Art & Design - etc
SOLIDWORKS sheet metal solidworks

Some concepts about DIN 5480 spline dimension Part 3

Carlos Soler
in Dimensioning / Tolerancing
21 0 Expert
In this tutorial, I will explain the concept of addendum correction (modification) and how is applied to DIN 5480 splines
SOLIDWORKS joint connection gear modification correctio addendum 5480 din

How to insert a picture in SOLIDWORKS?

Karajko CAD
in Drafting
20 3 Beginner
How to insert a picture in SOLIDWORKS?
SOLIDWORKS picture sketch solidworks

Project Manager

3D Machine and Technologies by Ferhat
in Drafting
12 0 Expert
Hello, I have been working professionally on technical drawing and design since 1993 I have worked on a wide variety of projects. I am a freelancer Nice to talk and learn with everyone. f.sogukkuyu@gmail.com
Autodesk Inventor

TECHNICAL DRAWINGS

Engineer Works
in Drafting
12 1 Expert
Manufacturing products of undesist necessity course.Any a product of all dimensions enable to render process.International standarts on own for informations.Product dimensions that material that is render to products.Paper dimensions that be can shift.A4 A3 A2 A1 A0 as.Tecnical drawings of important for generating to fairly big and important.Enought level on study required.Process for ideal.I can say to client buy sell and product information and for accept process order.
SOLIDWORKS

Some concepts about DIN 5480 spline dimension Part 2

Carlos Soler
in Dimensioning / Tolerancing
12 3 Expert
Continuation of part 1. https://grabcad.com/tutorials/some-concepts-about-din-5480-spline-dimension-part-1
SOLIDWORKS teeth dimension 5480 din

Car In catia

Avnish Kumar (अवनीश कुमार )
in Drafting
11 0 Expert
JUST FOR KONWleadge to start https://www.youtube.com/watch?v=G8sdfgZiMNY&t=54s&ab_channel=CADCAMSOFTINFO
SOLIDWORKS car catia solidwork

Perspective Views on Drawings at Solidworks

Andrey Gran
in Drafting
10 3 Beginner
Step by step Creating Perspective Views on Drawings at Solid Works
SOLIDWORKS drawing view perspective

Creating Custom Weldment Profiles in SolidWorks

Praveen Kumar
in Drafting
9 0 Intermediate
M.K. Engineering Workshop GST : 09BETPM3972F1ZW Please any Manufacturing requirement in Rice Mill, Floor Mill, Dall Mill, any Related Product. Design By- Praveen Kumar-Email ID- acadone.edu@gmail.com Note- All Model is a Basic Model But Our Workshop Make a Fully Define Model..... if You interested our model then Contact me by Mail....
SOLIDWORKS mechanical engineering sheet metal weldments solidworks

screw conveyor

taufik .
in Drafting
8 0 Expert
making screw conveyor https://www.youtube.com/watch?v=OkWvDbahK8c
SOLIDWORKS tutorials solidworks

2D CAD EXERCISES 21 IN SOLIDWORKS

Karan Talsaniya
in Drafting
9 0 Intermediate
2D CAD EXERCISES 21 IN SOLIDWORKS Wrench Design
SOLIDWORKS wrench design solidworks 2d cad exercises 21

Como dimensionar la matriz y los punzones de un troquel de corte

Hugo Martin
in Dimensioning / Tolerancing
6 1 Expert
Con este tutorial pretendemos explicar como dimensionar la matriz y los punzones de un troquel de corte, garantizando la tolerancia de fabricación de la pieza así como logrando la mayor vida útil del troquel.
Autodesk Inventor tolerancias Dimensiones

Single Inspection Dimension for Holes

Stephen Nyberg
in Dimensioning / Tolerancing
6 1 Beginner
I was having a hard time figuring out a good way to dimension a hole with both the diameter and depth of a hole with GD&T in a singe dimension. This dimension also required inspection so I wanted the inspection circle around the dimension and have the properties linked to the model. I did a lot of searching on the internet and did not find a good solution. Here is my solution. please leave your comments if you have a better way to do this.
SOLIDWORKS gd-t hide-show annotations note drawing dimension hole inspection
White Stratasys Logo White GrabCAD Logo
© 2024 Stratasys Inc.
ABOUT US
RESOURCES
SOCIAL
Streamline Pro
Control
Print
Shop
PARTNERS
COMMUNITY
Contact Us Website Terms of Use Software Terms of Use Privacy policy Trademarks Your Data on GrabCAD
The Computer-Aided Design ("CAD") files and all associated content posted to this website are created, uploaded, managed and owned by third-party users. Each CAD and any associated text, image or data is in no way sponsored by or affiliated with any company, organization or real-world item, product, or good it may purport to portray.