Tutorials

  • Design & CAD ×
  • Measurement / Inspection ×
  • Standards ×
  • Bentley MicroStation ×
  • IronCAD ×
  • Kompas-3D ×
  • Pro/Engineer Wildfire ×
  • Rendering ×

Параметризация модели через переменные в "Компас-3D"

Egor Chugay
in Modeling
13 0 Intermediate
Tutorial relevant for users "Kompas-3D". I don't know if they "Kompas-3D" is used in other countries, but I know "Kompas-3D" most popular in Russia, so further explanation will be in Russian. If you need English version, please comment tutorial, and I make translate. В данной заметке рассмотрено построение параметрической модели на примере корпуса микросхем типа QFP, модель строится в САПР «Компас-3D». Представленный ниже способ - лишь один из многих возможных. И я искренне надеюсь, что кому-то он поможет лучше разобраться 3D моделированием, а кто-то увидит, как оптимизировать процесс. Несмотря на то, что построение модели выполнялось в «Компас-3D», подобные механизмы могут присутствовать и в иных системах, так что возможно пригодится пользователям другого ПО. Описанный ниже способ предполагает наличие определенного навыка работы с 3D моделями, и не содержит подробного описания последовательностей нажатия клавиш, скорее описана методика построения и взаимосвязь объектов.
Kompas-3D qfp tutorial parametric kompas-3d

can you give drawing models with dimensions to practice?

vigneshwaran I
in Design & CAD
13 0 Intermediate
try
Pro/Engineer Wildfire

can you give drawing models with dimensions to practice?

khawer mahmood
in Design & CAD
7 0 Intermediate
practice models
Pro/Engineer Wildfire

Need to put lights into a render.

Jitender Chaurasia (JittuARTS)
in Design & CAD
4 0 Intermediate
Use keyshot IES light...By this you can give real looking lightening effect
Rendering rendering lights

Tutorial: Welding In Proe

Milan Ilić
in Design & CAD
4 0 Intermediate
Welding in Pro E (Creo 2)
Pro/Engineer Wildfire tutorial enginner pro parametric creo welding

How to create an environment in keyshot by yourself?

Jitender Chaurasia (JittuARTS)
in Design & CAD
3 0 Intermediate
You can make your own environment by editing your HDRI
Rendering environment keyshot rendering

IronCAD - Using the Co-ordinate system to create a section

Nick
in Modeling
2 0 Intermediate
Use the Co-Ordinate systems to create a section plane. This is a handy alternative the section tool, as it does not cut the solid model.
IronCAD section cross

How to analyse Pro Engineer component in Ansys 10.0 welding property?

harikrushna dodiya
in Design & CAD
2 0 Intermediate
u can weld through following step in workbench There are one "WELD" option in geometry. there u can create weld
Pro/Engineer Wildfire property weld

How to Open Your Model in KeyShot

KeyShot
in Design & CAD
2 0 Intermediate
Within GrabCAD, you have a pulldown in the model viewing screen with the option to Open with KeyShot. When a model is open inside a project of the Workbench interface, you and any collaborators will see a Open With menu above the model in the upper right corner. With a single click, members of the project are able to select Open with KeyShot to launch and open the model directly inside KeyShot. With KeyShot installed, the model will open immediately inside the KeyShot realtime rendering environment. A video of the functionality can be viewed here. Once you have your model in KeyShot, you're ready to render! To get started quickly, see the quick tips and tutorials available here: http://keyshot.com/learning/
Rendering keyshot 3d-rendering

How to create a perforated sheet metal

Bob Heijningen
in Design & CAD
1 1 Intermediate
could be that you want to use rectangular patern. by creating one hole and copying it over the surface of the sheet. i actually never use sheet metal parts but here it goes.
IronCAD perforations

Smoking Shelter

David Crosby
in Assemblies
1 0 Intermediate
Building the smoking shelter. I have full workshop drawings for making all of the parts. Contact me at gbm60@hotmail.com if you are interested in making the first real one.
Pro/Engineer Wildfire shelter smoking

How to add a label onto a surface in Keyshot without bleedover to other surfaces?

Ahmed Zawad Ul Hoque Shovon
in Design & CAD
1 1 Intermediate
The following is an easy way to do it in KeyShot itself..Hope it helps...
Rendering label keyshot surface rendering solidworks

How to Copy-Paste parameters from one part to another in Pro-E?

martin Cronje
in Design & CAD
1 0 Intermediate
It doesn't the parameters if there is a parameter which has a restriction. I've deselected those parameters and copy and paste the rest into the part. You will have to create the restricted parameters yourself.
Pro/Engineer Wildfire values paste parameters copy proe pro pro-e

how to do wire rope in pro e

Tushar Wandhare
in Design & CAD
1 1 Intermediate
wire rope can be design by using WRAP command.
Pro/Engineer Wildfire

IronCAD - Linked Cross Sections

Nick
in Modeling
0 0 Intermediate
Create independent parts all driven by the one linked cross section
IronCAD section cross linked ironcad structural
White Stratasys Logo White GrabCAD Logo
© 2024 Stratasys Inc.
ABOUT US
RESOURCES
SOCIAL
Streamline Pro
Control
Print
Shop
PARTNERS
COMMUNITY
Contact Us Website Terms of Use Software Terms of Use Privacy policy Trademarks Your Data on GrabCAD
The Computer-Aided Design ("CAD") files and all associated content posted to this website are created, uploaded, managed and owned by third-party users. Each CAD and any associated text, image or data is in no way sponsored by or affiliated with any company, organization or real-world item, product, or good it may purport to portray.