Tutorials

  • Drafting ×
  • Translations ×
  • Autodesk Inventor ×
  • PTC Creo Parametric ×

Creating a 2D Drawing in Creo Paramatrics

Zulfiqar Ali
in Drafting
1 0 Beginner
In this tutorial you will learn to create a 2D drawing in Creo paramatrics. Serving on Fiverr Now: https://www.fiverr.com/dxhunzai/design-and-render-3d-models-in-solidworks-and-creo https://www.fiverr.com/dxhunzai/solve-any-problem-of-mechanical-engineering
PTC Creo Parametric parametric 2-0 creo

Cap screws and machine screws

dea
in Drafting
65 12 Intermediate
Cap screws and machine screws are similar in shape, differing only in their relative sizes. Machine screws are usually smaller in size, compared to cap screws. These are used for fastening two parts, one with clearance hole and the other with tapped hole. The clearance of the unthreaded hole need not be shown on the drawing as its presence is obvious. Figure 5.24 shows different types of cap and machine screws, with proportions marked Cap screws are produced in finish form and are used on machines where accuracy and appearance are important. As cap screws are inferior to studs, they are used only on machines requiring few adjustments and are not suitable where frequent removal is necessary. These are produced in different diameters, upto a maximum of 100 mm and lengths 250 mm. Machine screws are produced with a naturally bright finish and are not heat treated. They are particularly adopted for screwing into thin materials and the smaller ones are threaded throughout the length. They are used in fire-arms, jigs, fixture and dies. They are produced in different diameters upto a maximum of 20 mm and lengths upto 50 mm.
Autodesk Inventor screw cap

Flat Pattern of Sheet Metal Component in Creo Drawings

jehan kothari
in Drafting
0 0 Intermediate
It is somewhat tricky as how to add flat pattern of Sheet Metal Component in Creo Drawings. Check out this video :)
PTC Creo Parametric drawing parametric creo pattern flat metal sheet

Project Manager

3D Machine and Technologies by Ferhat
in Drafting
13 0 Expert
Hello, I have been working professionally on technical drawing and design since 1993 I have worked on a wide variety of projects. I am a freelancer Nice to talk and learn with everyone. f.sogukkuyu@gmail.com
Autodesk Inventor

Adding Drawing view Names automatically w/req formatting in Creo

Kulbir Sandhu
in Drafting
0 0 Intermediate
In the drawing, when you need to show view label only with single view name, not the duplicating name, you can use the setting as described in this video. In this, you would learn: 1. Formatting View Label to Simplified one. 2. Set the required config settings, 3. Set the required Drawing detail options 4. The advantage of using Aux view in respect of view label.
PTC Creo Parametric options detail drawing settings configuration label view

Sketchup to Inventor-How to export SketchUp to Inventor-convert Google sketchup to Autodesk Inventor

Infinity Projetos Brasil
in Translations
1 1 Beginner
see the video below
Autodesk Inventor autodesk inventor sketchup import export

How to create BOM table from the scratch

Vladimir Palffy
in Drafting
1 0 Beginner
A few simple steps and you ill know all about Repeat region in Creo - you will know How to manage BOM and BOM positions
PTC Creo Parametric positions manage bom create how creo region repeat

[EPS 04] Cara membuat Etiket Gambar Teknik | Autodesk Inventor

Suryo Puji Buwono
in Drafting
3 0 Beginner
Cara membuat Etiket Gambar Teknik dengan Autodeks Inventor
Autodesk Inventor teknik gambar e-tiket

Convertir Archivo de Sketchup a Inventor exportación e importe Español

Infinity Projetos Brasil
in Translations
1 0 Beginner
mira el video a continuación
Autodesk Inventor sketchup inventor exportacion importar

CAD I CAM I CAE I BIM Tutorial

Tashamjar Guruji
in Drafting
2 1 Beginner
Welcome to SS e Academy.com Now Tutorial Creo Parametric 5.0 You have more learn CAD I CAM I CAE I BIM Software Tutorial In www.SSeAcademy.com
PTC Creo Parametric creo revit autocad cae cam cad

Creo Parametric. Адаптивная пружина сжатия (Часть 1). Flexible Compression Spring.

Николай Шестаков
in Translations
0 0 Intermediate
Это видео, а также вторую часть, заключительную, смотрите на моем канале YouTube^ https://www.youtube.com/channel/UC9fDxJ-FN2hPADXeyca7dyg Адаптивная пружина позволяет использовать ее в качестве гибкого компонента в сборке, что дает возможность добавлять компонент в сборку много раз с разными размерами в зависимости от места установки. Создание адаптивной пружины на растяжение можно посмотреть на этом же канале: https://www.youtube.com/watch?v=6MqKQuqpMF8&t=1s An adaptive spring allows it to be used as a flexible component in an assembly, which makes it possible to add a component to an assembly many times with different sizes depending on the installation location. Программа использованная в уроке: Creo Parametric опора=(угол_опоры/360)*диа_проволоки межосевое_расстояние=высота+2*опора-диа_проволоки Перемещение=межосевое_расстояние/(кол_витков-1)-диа_проволоки расстояние_р3_р4= межосевое_расстояние -2*диа_проволоки-2*Перемещение A=кол_витков-2 /*количество активных витков B=A*диа_проволоки-4*Перемещение-расстояние_р3_р4 C= -расстояние_р3_р4*диа_проволоки PICH=(-B+sqrt(B^2-4*A*C))/(2*A) расстояние_1=диа_проволоки расстояние_2=диа_проволоки+Перемещение расстояние_3=межосевое_расстояние-диа_проволоки-Перемещение расстояние_4=межосевое_расстояние-диа_проволоки pp_1=диа_проволоки pp_2=диа_проволоки pp_3=PICH pp_4=PICH pp_5=диа_проволоки pp_6=диа_проволоки Видео является переработанной и адаптированной для пользователей моего канала версией цикла "Creo Flexible Compression Spring" англоязычного автора канала: https://www.youtube.com/channel/UCmx0...
PTC Creo Parametric parametric flexible spring adaptive creolessons creo ptc

Having the problem when show annotation model used in the drawing

Mohit Saxena
in Drafting
1 0 Beginner
"Having the problem when show annotation model used in the drawing"
PTC Creo Parametric

How to Create Full Unfold Cross Section

Vladimir Palffy
in Drafting
2 0 Beginner
In this video, you can see the logic or explanation - How Xsec Full(Aligned) and Full(Unfold) works - you need to select Axis for this type of section or not.
PTC Creo Parametric section cross

Remove Ghost object from drawing

Vladimir Palffy
in Drafting
0 0 Beginner
In this tutorial, you can learn How to Remove Ghost objects from drawing - not stored ghosts anymore in PDM system
PTC Creo Parametric remove objects ghost

How to create cross sections

Vladimir Palffy
in Drafting
1 0 Beginner
In this tutorial, you can learn How to create cross sections - full and local
PTC Creo Parametric tutorial creo sections cross
White Stratasys Logo White GrabCAD Logo
© 2024 Stratasys Inc.
ABOUT US
RESOURCES
SOCIAL
Streamline Pro
Control
Print
Shop
PARTNERS
COMMUNITY
Contact Us Website Terms of Use Software Terms of Use Privacy policy Trademarks Your Data on GrabCAD
The Computer-Aided Design ("CAD") files and all associated content posted to this website are created, uploaded, managed and owned by third-party users. Each CAD and any associated text, image or data is in no way sponsored by or affiliated with any company, organization or real-world item, product, or good it may purport to portray.