Tutorials

  • Autodesk Inventor ×
  • Bentley MicroStation ×
  • screw ×

Cap screws and machine screws

dea
in Drafting
65 12 Intermediate
Cap screws and machine screws are similar in shape, differing only in their relative sizes. Machine screws are usually smaller in size, compared to cap screws. These are used for fastening two parts, one with clearance hole and the other with tapped hole. The clearance of the unthreaded hole need not be shown on the drawing as its presence is obvious. Figure 5.24 shows different types of cap and machine screws, with proportions marked Cap screws are produced in finish form and are used on machines where accuracy and appearance are important. As cap screws are inferior to studs, they are used only on machines requiring few adjustments and are not suitable where frequent removal is necessary. These are produced in different diameters, upto a maximum of 100 mm and lengths 250 mm. Machine screws are produced with a naturally bright finish and are not heat treated. They are particularly adopted for screwing into thin materials and the smaller ones are threaded throughout the length. They are used in fire-arms, jigs, fixture and dies. They are produced in different diameters upto a maximum of 20 mm and lengths upto 50 mm.
Autodesk Inventor screw cap

Autodesk Inventor Tutorial #1 | How to make screw diriver.

STUDYCADCAM
in Modeling
3 0 Beginner
Autodesk Inventor Tutorial #1 | How to make screw diriver.
Autodesk Inventor driver screw inventor autodesk

Archimedes' screw unfold

Josh Mings
in Design & CAD
2 0 Beginner
Inventor may be able to do it. You may try to adjust the inner and outer diameter of the guides you're using. Here's how you would do it in SolidWorks.
Autodesk Inventor screw archimedes

Clamp. Autodesk Inventor. 3D CAD practice. How to make cbp–12082023–007.00🦾

Sergey Torshin
in Modeling
1 0 Beginner
Hello, it’s cadblurprints! In this video, I share how to create a 3D assembly in Autodesk Inventor. This is the 007–СБЦ «Струбцина» (Clamp) assembly. I hope you enjoy it! You can find this drawing in my Instagram, Telegram, ВКонтакте, Дзен. You can find the links here https://taplink.cc/cadblueprints.
Autodesk Inventor inventor tips educational beginner design assembly screw clamp

Clevis mount. Autodesk Inventor. 3D CAD practice. How to make cbp–08042023–006.00🙉

Sergey Torshin
in Modeling
0 0 Beginner
In this tutorial, I share how to create 3D parts and an assemble in Autodesk Inventor (2021). This is the assemble 006–СП «Серьга подвесная» (Clevis mount). You'll see how to use dimensions and constrain on sketch, Extrude, Revolve, Chamfer, Thread commands, how to constrain parts in an assemble. I hope you enjoy it! You can find this drawing in my Instagram, Telegram, ВКонтакте, Яндекс.Дзен. You can find the links here https://taplink.cc/cadblueprints.
Autodesk Inventor design beginner assemble housing screw pin clevis rod clevis mount

Screw. Autodesk Inventor. 3D CAD practice. How to make cbp–27072023–007.02🦴

Sergey Torshin
in Modeling
0 0 Beginner
Hello, it’s cadblurprints! In this video, I share how to create a 3D part in Autodesk Inventor. This is the part «Винт» (Screw) of the assembly «Струбцина» (Clamp) 007–СБЦ. I hope you enjoy it! You can find this drawing in my Instagram, Telegram, ВКонтакте, Дзен. You can find the links here https://taplink.cc/cadblueprints.
Autodesk Inventor design autodesk tips inventor beginner screw clamp educational
White Stratasys Logo White GrabCAD Logo
© 2024 Stratasys Inc.
ABOUT US
RESOURCES
SOCIAL
Streamline Pro
Control
Print
Shop
PARTNERS
COMMUNITY
Contact Us Website Terms of Use Software Terms of Use Privacy policy Trademarks Your Data on GrabCAD
The Computer-Aided Design ("CAD") files and all associated content posted to this website are created, uploaded, managed and owned by third-party users. Each CAD and any associated text, image or data is in no way sponsored by or affiliated with any company, organization or real-world item, product, or good it may purport to portray.