Tutorials

  • Autodesk 123D ×
  • VRML / WRL ×
  • GrabCAD Community ×

Part 3: Setting Up for Soft Proofing in Adobe® Photoshop®

Naftali Eder
in Process
3 0 Beginner
This tutorial is a continuation of my last tutorial "Part 2: Introduction to Color Proofing: Uploading the Stratasys Color Profile". It will demonstrate how to How to Use Adobe® Photoshop® to simulate how colors selected on screen will print on the J750 and how to adjust your input color if required.
VRML / WRL polyjet rgb matching proofing j750 stratasys photoshop color

Standard Parts Online Library (3D Model & 2D Drawing)

Mohit
in Design & CAD
8 0 Intermediate
In this tutorial U can find Standard Parts Online Library (3D Model & 2D Drawing) so u can directly used ...
GrabCAD Community library model parts standard

Alternative method to find CAD models

Sar Dar
in Design & CAD
11 1 Beginner
Here's an alternative, more reliable method to search for CAD models on GrabCAD, or any other site for that matter. This method is especially helpful when looking for a specific CAD model or key phrase. It can also be used to quickly find information on forums and other help sites. Here's an overview of what this tutorial will be covering: Limit search to specific site: site:<website link> Require certain words to be included: "must include in this order" Exclude unwanted results: -unwanted
GrabCAD Community easy engine fast google browser model cad search

3D Modeling of a Braitenberg Vehicle in 4 Steps using Autodesk 123D Design

Yoana Ivanova
in Modeling
2 0 Intermediate
This tutorial is suitable for designers who have a basic knowledge of using the open source product Autodesk 123D Design. The steps to build a Breitenberg vehicle are as follows: 1. Modeling a wheel: a cylinder with a diameter of 2 cm and a height of 0.5 cm is placed in the workspace. Drill a hole in it by drawing a circle with a diameter of 0.3 cm and extruding - 0.5 cm with the Extrude tool. We soften the edges of the cylinder with Fillet Radius: 0.5. 2. Clone the wheel: rotate the resulting wheel 90° along the Z axis and copy it with Ctrl+C and Ctrl+V. 3. Modeling the vehicle body: regarding the design of the vehicle body, there are various options. In this case the author models a classic vehicle, which is most often shown in the bibliographic sources. After drawing and extruding a surface with the desired shape we apply Fillet with radius 35 on the back edge and with 30 on the front edge for a contemporary design (i could provide more images if it is needed). On the selected side edges we successively apply Fillet with a radius of 9. 4. Make a special place for the sensor: it is necessary to select the square plane that is located in the middle of the case and successively apply Sketch > Project, Sketch > Offset and Construct > Extrude with a negative value.
Autodesk 123D breitenberg vehicle

Twisted Pipe 90 deg. bend

Adegbuyi Adeyemi
in Modeling
0 0 Beginner
Creating a 90 degrees twisted pipe. Follow with your own design tool. It's important that the diameter of the guiding torus be >> x 3 pipe dia. The intent is to demonstrate some tools and follow someone to follow with the steps. The steps can be done a lot faster, more efficient manner or using other approaches. Like, share and comment for others to benefit.
VRML / WRL hollow torus bend pipe
White Stratasys Logo White GrabCAD Logo
© 2024 Stratasys Inc.
ABOUT US
RESOURCES
SOCIAL
Streamline Pro
Control
Print
Shop
PARTNERS
COMMUNITY
Contact Us Website Terms of Use Software Terms of Use Privacy policy Trademarks Your Data on GrabCAD
The Computer-Aided Design ("CAD") files and all associated content posted to this website are created, uploaded, managed and owned by third-party users. Each CAD and any associated text, image or data is in no way sponsored by or affiliated with any company, organization or real-world item, product, or good it may purport to portray.