Tutorials

Pre-Printing Tips for Rigid Opaque and Transparent PolyJet Materials

13 13 Beginner
This tutorial gives you tips for how to use various rigid materials on Stratasys PolyJet printers. This includes the entire Vero family, as well as the VeroVivids, VeroFlex, VeroClear, and FullCure720 (also known as RGD720). You can truly optimize final results for these materials if you know how to best utilize GrabCAD Print settings for part orientation, printing mode, surface finish, grid style, material selection, tray preparation, and other factors. Below, we will show you how. The information in this tutorial is applicable to GrabCAD Print version 1.32 and above. Older versions may differ slightly.

Pre-Printing tips for PolyJet on GrabCAD Print

7 0 Beginner
In this tutorial, we will discuss how to optimize a 3D model in GrabCAD Print before printing it on a PolyJet 3D printer.

Introduction to Pave setting, and its basic knowledge.

3 0 Expert
What a Pave Setting Is The pavé setting, pronounced “pa-vay,” comes from the French word “to pave,” as in paved with diamonds. By closely setting small diamonds together with minimal visibility of the tiny metal beads or prongs holding the stones in place, the effect is one of continuous sparkle.

How to set Default "Sketch" Settings in SolidWorks

1 0 Beginner
When we start Sketching in SolidWorks, there are default setting like snapping, assigning auto relations etc. are assigned by itself. Many users are not aware that this are actually "settings" which can be turned on and off. This video takes you through all the default setting available.

SolidWorks 2019 RealView Graphics Button Activation With Hack 6.0 Program

1 0 Beginner
https://www.youtube.com/watch?v=L6Invcqz7LQ&t=25s

Information about Catia - Catia General Settings -1

0 0 Expert
General settings for the catia program; It should be as follows.

How to Control Objects with Layer in Siemens NX

0 0 Intermediate
When You Have a small number of object, you can manage the objects by using the Show & Hide command. However, when modeling required a huge number of object to be managed on the screen, the show and hide command is not sufficient.in this case, you will use the layers. https://youtu.be/9bq9swwpjS4

AutoCAD 2019 Convert to Classic and Undo Settings

0 0 Beginner
https://www.youtube.com/watch?v=I28H8gtDnw0&t=10s

Layer & Move to Layer command in Siemens NX

0 0 Beginner
Hello Guys, One of my viewers suggest me to record this tutorial of Layer, So, here is, I am explaining how to use Layer command & its related more command as following. - Layer - Move to Layer - Layer Settings - Layer Category - Copy to Layer Have any queries? - comment on it. Like my videos if you are satisfied & for more videos, kindly Subscribe my channel. For any commercial discuss please visit www.rinkeshpatel.com Thank You.

Information about Catia - Catia General Settings - 3

0 0 Expert
General settings for the catia program; It should be as follows.

How can i change reflection image to other

0 0 Beginner
Hello there, This should be an easy one just follow below...

Adding Drawing view Names automatically w/req formatting in Creo

0 0 Intermediate
In the drawing, when you need to show view label only with single view name, not the duplicating name, you can use the setting as described in this video. In this, you would learn: 1. Formatting View Label to Simplified one. 2. Set the required config settings, 3. Set the required Drawing detail options 4. The advantage of using Aux view in respect of view label.

3D Printing CAD STL Export Settings for no segments

0 1 Beginner
3D printing is booming–big time. And since most 3D printers accept STL exports, engineers are using the export format more and more. I’ve experimented with 3D printing using different settings of the STL export format. In this Video, I’ll share my experiences with you. For the sake of accuracy, for these tests I used NX 11 and an Anycubic mega X 3D printer. Here is the video tutorial: https://youtu.be/h34M6tFaTpM Please dot forget to schow some support and to subscribe my YT-channel