Complex Sheetmetal Exercise | Solidworks Part to AutoCAD DXF | Solidworks to AutoCAD | CADable

5 May, 2025 01:10 AM

Hi friends welcome back to CADable. This is Engr. Ibrahim Omer and in this tutorial we will learn how to make a complex sheetmetal part in solidworks and we will also export this part to AutoCAD for manufacturing.

Chapters of the tutorial:

Introduction 0:00
Solidworks basic settings 0:22
Draw a 3 point arc 0:47
Using offset entity tool 1:33
Using two lines to close the contour 1:48
How to find sheetmetal module in solidworks 2:02
Sheetmetal base flange / tab 2:14
Sheetmetal edge flange 2:30
Sheetmetal default radius settings inside Solidworks 2:45
Sheetmetal flatten in Solidworks 3:27
Saving file as dxf for machining (Solidworks to AutoCAD DXF) 3:43
Conclusion 4:32

That's it for today's tutorial! I really hope you find it useful. If you have any questions or need help, please drop a comment below. I love hearing from you.

Don't forget to subscribe for more fun and informative videos. I also make tutorials, Shorts, and even quizzes and polls to help refresh your memory, learn new things, or just revisit the basics.

#ComplexSheetmetalExercise #SolidworksParttoAutoCADDXF #SolidworkstoAutoCAD #CADable #CADabletutorials #solidworkssheetmetal

Watch tutorial:
https://youtu.be/D-J0SZIjTWQ