Solid Edge Tutorials | How to use Rib command

CAD CAM Learning

15 May, 2021 09:21 AM

This tutorial show How to use all of selection of Rib feature in Solid Edge

FOR MORE tutorials, please visit: https://www.youtube.com/c/CADCAMLearning?sub_confirmation=1

1. Step 1: How to use Rib feature

   
   

   Video tutorials show how to use Rib feature

   Constructs a rib by extruding a profile. The Direction and Side steps allow you

   to control the shape of the rib.

   

   Constructing a synchronous rib feature

   When you choose the synchronous Rib command, the command bar guides you

   through the following steps. The Rib command requires an existing sketch.

   
   

2. Step 2: Select Step

   Select the sketch elements that define the rib feature

3. Step 3: Rib Thickness Step

   On the dynamic edit box, type in the rib thickness value and press the Tab key

4. Step 4: Extent Step

   Option to extend the ends of the sketch elements until they intersect the part

5. Step 5: Finite Depth Step

   Option on–Sets the rib extent so that the sketch elements are projected a specified distance to either side of the profile plane. (The rib does not project all the way to the existing faces on the part.)

   Type the distance in the value edit box. Option off–Extends the faces on the rib that are perpendicular to the sketch plane to the existing faces on the part.

   
   

6. Step 6: Alignment Step

   Define the side of the sketch to create the rib on

7. Step 7: Side Step

   Use the steering wheel to define direction for the rib

8. Step 8: Finish Step

   Click the Accept button to create the feature