Tutorials

  • Design & CAD ×
  • Engineering Fundamentals ×
  • Autodesk 123D ×
  • Geomagic Design ×
  • JT ×
  • STL ×

diverse shape translation to JT or STP

juergen grewe
in Translations
9 2 Intermediate
Have found a way to import / translate easy shape files like 3ds, wrl, skp, stl, ifc and so on into JT or STP. The shape files can have texture or not. My interest was how to get the shape files with texture translated to JT. For this, I use PCon Planner and save as 3DS. After this, import it into MeshLab (single texture file / no layer) and save it as WRL (VRML 2). This is than easy to import into Teamcenter Livecyle Visualisation (TCVis) and save as JT. If you like to have more imported WRL/JT files into TCvis (JT2Go) please rename the texture or the view results in TCVis (JT2Go) are bad, looks like unplaced textures. If you like to export files with not a texture another way is to use. The fast one with no colours is to save as stl and import it into your volume modeller. The longer way is here to import it into PCon after this save as Skp (Sketchup) and now is to use Automapki (~40 $ or € / year sorry no freeware I have found) and save as STP file. The result you can now import into a volume modeller and use it there or (and) save it as JT and many other files too. Hope you like this tutorial a bit. If you have any questions please let me know.
JT jt2go tcvis edge solid paint 3d mashlab pconplanner automapki sketchup

3D Modeling of a Braitenberg Vehicle in 4 Steps using Autodesk 123D Design

Yoana Ivanova
in Modeling
2 0 Intermediate
This tutorial is suitable for designers who have a basic knowledge of using the open source product Autodesk 123D Design. The steps to build a Breitenberg vehicle are as follows: 1. Modeling a wheel: a cylinder with a diameter of 2 cm and a height of 0.5 cm is placed in the workspace. Drill a hole in it by drawing a circle with a diameter of 0.3 cm and extruding - 0.5 cm with the Extrude tool. We soften the edges of the cylinder with Fillet Radius: 0.5. 2. Clone the wheel: rotate the resulting wheel 90° along the Z axis and copy it with Ctrl+C and Ctrl+V. 3. Modeling the vehicle body: regarding the design of the vehicle body, there are various options. In this case the author models a classic vehicle, which is most often shown in the bibliographic sources. After drawing and extruding a surface with the desired shape we apply Fillet with radius 35 on the back edge and with 30 on the front edge for a contemporary design (i could provide more images if it is needed). On the selected side edges we successively apply Fillet with a radius of 9. 4. Make a special place for the sensor: it is necessary to select the square plane that is located in the middle of the case and successively apply Sketch > Project, Sketch > Offset and Construct > Extrude with a negative value.
Autodesk 123D breitenberg vehicle

Is there any chance the 3D Viewer will get "Perspective View Mode" back?

Jitender Chaurasia (JittuARTS)
in Design & CAD
1 0 Intermediate
Follow the below mentioned steps
STL stl view grabcad 3d

Conversion of .STL- & .VRML-files (.WRL) files to 3D-PDF

Pavel Samuta
in Modeling
1 0 Beginner
Free 3D PDF from Revit STL using Meshlab, MiKTeX and U3D-2-PDF
STL conversion 3d-pdf

Minimalist Wall Mounts

Alviworld
in Modeling
0 0 Beginner
Hello! im Álvaro Fernández, an artist by heart and a engineer by trade. Im from Concón, a quiet beach city in Chile. In this tutorial Im going to teach you how I make the minimalist stl file I post on this site. Its a begginer tutorial, I encourage to all to try it! you can acomplish it. I use: A pencil. Paper. Rhinoceros 6
STL interiordesign 3dprint oneline diy wallmounts minimalism art rhinoceros

3D Printing CAD STL Export Settings for no segments

Gouza
in Modeling
0 1 Beginner
3D printing is booming–big time. And since most 3D printers accept STL exports, engineers are using the export format more and more. I’ve experimented with 3D printing using different settings of the STL export format. In this Video, I’ll share my experiences with you. For the sake of accuracy, for these tests I used NX 11 and an Anycubic mega X 3D printer. Here is the video tutorial: https://youtu.be/h34M6tFaTpM Please dot forget to schow some support and to subscribe my YT-channel
STL fdm print 3d nx siemens export settings stl
White Stratasys Logo White GrabCAD Logo
© 2024 Stratasys Inc.
ABOUT US
RESOURCES
SOCIAL
Streamline Pro
Control
Print
Shop
PARTNERS
COMMUNITY
Contact Us Website Terms of Use Software Terms of Use Privacy policy Trademarks Your Data on GrabCAD
The Computer-Aided Design ("CAD") files and all associated content posted to this website are created, uploaded, managed and owned by third-party users. Each CAD and any associated text, image or data is in no way sponsored by or affiliated with any company, organization or real-world item, product, or good it may purport to portray.