Tutorials

  • Design & CAD ×
  • Measurement / Inspection ×
  • Autodesk 123D ×
  • BobCAD-CAM ×
  • Mastercam ×
  • Onshape ×
  • solidThinking Evolve ×
  • T-Flex CAD ×
  • GrabCAD Workbench ×

Onshape Tutorial Exersice

Çağın Gergin @chagocad
in Modeling
11 0 Intermediate
Sometimes you will not have Solidworks or a similar program installed on your computer. And you may have to make a model immediately. In such situations, Onshape is great. The link to the modeling file from the sample technical drawing is given below. https://cad.onshape.com/documents/51b10db64d8c10d69e04f4da/w/b4cd4b090cea13100d679675/e/741f8ec43a660ff55252cd29
Onshape onshape modellig loft free extrude

Mastercam 2021 (CAD+CAM)

MANOJ VISHWAKARMA
in Modeling
6 2 Intermediate
Mastercam 2021 3D Modeling tutorial
Mastercam cnc cam cad mastercam

How do i track changes by others?

Sara Sigel
in Design & CAD
5 1 Intermediate
Your partner can upload a new version, leave a sketch, or write a comment to let you know about a change. If you have notifications setup, then you'll get an email when any of these happen. https://grabcad.com/email/edit You can also compare changes between versions, which is very useful. For a visual comparison of what is different from one version to the next, see the steps, below.
GrabCAD Workbench file grabcad cad workbench management version revision

volleyball in Onshape

Jens Nielsen
in Modeling
4 0 Intermediate
I wanted to get to know Onshape better and had a look at the split, transform and pattern command. I repeated this in SolidWorks and it is the same workflow.
Onshape volleyball

how to draw campbell diagram in ansys pls hlp me

harikrushna dodiya
in Design & CAD
3 0 Intermediate
campbell diagram step start from 9 plz see step 9
GrabCAD Workbench

How can I change picture order after uploading a model ?

shubham gupta
in Design & CAD
2 3 Intermediate
Please go through this tutorial.
GrabCAD Workbench order image gif

tutorial- How to make a rotor blower (the answer to the request) in T-Flex CAD Parametric 2D/3D

Tomek F.
in Design & CAD
2 0 Intermediate
Thank you I hope that I helped
T-Flex CAD

3D Modeling of a Braitenberg Vehicle in 4 Steps using Autodesk 123D Design

Yoana Ivanova
in Modeling
2 0 Intermediate
This tutorial is suitable for designers who have a basic knowledge of using the open source product Autodesk 123D Design. The steps to build a Breitenberg vehicle are as follows: 1. Modeling a wheel: a cylinder with a diameter of 2 cm and a height of 0.5 cm is placed in the workspace. Drill a hole in it by drawing a circle with a diameter of 0.3 cm and extruding - 0.5 cm with the Extrude tool. We soften the edges of the cylinder with Fillet Radius: 0.5. 2. Clone the wheel: rotate the resulting wheel 90° along the Z axis and copy it with Ctrl+C and Ctrl+V. 3. Modeling the vehicle body: regarding the design of the vehicle body, there are various options. In this case the author models a classic vehicle, which is most often shown in the bibliographic sources. After drawing and extruding a surface with the desired shape we apply Fillet with radius 35 on the back edge and with 30 on the front edge for a contemporary design (i could provide more images if it is needed). On the selected side edges we successively apply Fillet with a radius of 9. 4. Make a special place for the sensor: it is necessary to select the square plane that is located in the middle of the case and successively apply Sketch > Project, Sketch > Offset and Construct > Extrude with a negative value.
Autodesk 123D breitenberg vehicle

how to use rotation in axis like autocad in mastercam

Abdul Haseeb Malik
in Design & CAD
1 0 Intermediate
I never tried MasterCam... may be you will find your answer in this tutorial
Mastercam

how do I choose a picture (rendering) that will appear first in the library?

Inspire
in Design & CAD
1 0 Intermediate
1yshetynrw7uywru yuuywrywr
GrabCAD Workbench

how to draw campbell diagram in ansys pls hlp me

harikrushna dodiya
in Design & CAD
1 0 Intermediate
in modal analysis go to analysis setting than go rotodynamic check coriollis effect on than do campbell diagram on feed your data and solve it
GrabCAD Workbench

Anyone have "complex" Loft examples?

Christopher Owens
in Design & CAD
0 0 Intermediate
Thanks Tajusyed. Here is one I tried and it worked!
Onshape loft

tutorial how to make a wrist in the T-flex cad

Tomek F.
in Design & CAD
0 0 Intermediate
the same way you do a variety of programs
T-Flex CAD

How can I create a new Autodesk Fusion 360 project in GrabCAD Workbench?

Sara Sigel
in Design & CAD
0 1 Intermediate
Here is a quick video tutorial to create a model using the GrabCAD Workbench and Autodesk Fusion 360 integration.
GrabCAD Workbench grabcad new create workbench fusion360

Tutorial MasterCAM Sprocket 35 X 0.5

Muhamad Zen
in Modeling
0 1 Intermediate
Tutorial MasterCAM Sprocket 35 X 0.5
Mastercam mastercam sprocket muhamad_zen12 zen muhamad
White Stratasys Logo White GrabCAD Logo
© 2024 Stratasys Inc.
ABOUT US
RESOURCES
SOCIAL
Streamline Pro
Control
Print
Shop
PARTNERS
COMMUNITY
Contact Us Website Terms of Use Software Terms of Use Privacy policy Trademarks Your Data on GrabCAD
The Computer-Aided Design ("CAD") files and all associated content posted to this website are created, uploaded, managed and owned by third-party users. Each CAD and any associated text, image or data is in no way sponsored by or affiliated with any company, organization or real-world item, product, or good it may purport to portray.