Tutorials

  • Design & CAD ×
  • Modeling ×
  • Kinematics ×
  • Autodesk 123D ×
  • BricsCAD ×
  • Femap ×
  • SolidFace ×

Convert STEP/IGES files to STL on Mac

Robert Riegel
in Design & CAD
3 1 Intermediate
We’ve added a translator on Workbench that allows users to download a CAD file in STEP, IGES and STL formats, regardless of the format it was uploaded in. This makes it easy to share models with partners who don’t use the same CAD system you do. With just one click your supplier can download any of the neutral formats based on the original file you uploaded.
SolidFace step iges stl conversion

How to model a simplified toilet in BricsCAD

2e2bc4ca
in Modeling
3 1 Intermediate
Key commands covered: DMSIMPLIFY Extrude - taper DMTHICKEN ISOLATEOBJECTS HIDEOBJECTS UNISOLATEOBJECTS SolidEdit - Body - seParate Components library (BricsCAD Mechanical only)
BricsCAD potty wc bathroom plumbing bricscad toilet

BUCKLING IN FEMAP FOR BEGINNER

Hanen Bdioui
in Modeling
2 0 Beginner
LESSON 1 : BUCKLING IN FEMAP FOR BEGINNER
Femap buckling design solidworks femap

3D Modeling of a Braitenberg Vehicle in 4 Steps using Autodesk 123D Design

Yoana Ivanova
in Modeling
2 0 Intermediate
This tutorial is suitable for designers who have a basic knowledge of using the open source product Autodesk 123D Design. The steps to build a Breitenberg vehicle are as follows: 1. Modeling a wheel: a cylinder with a diameter of 2 cm and a height of 0.5 cm is placed in the workspace. Drill a hole in it by drawing a circle with a diameter of 0.3 cm and extruding - 0.5 cm with the Extrude tool. We soften the edges of the cylinder with Fillet Radius: 0.5. 2. Clone the wheel: rotate the resulting wheel 90° along the Z axis and copy it with Ctrl+C and Ctrl+V. 3. Modeling the vehicle body: regarding the design of the vehicle body, there are various options. In this case the author models a classic vehicle, which is most often shown in the bibliographic sources. After drawing and extruding a surface with the desired shape we apply Fillet with radius 35 on the back edge and with 30 on the front edge for a contemporary design (i could provide more images if it is needed). On the selected side edges we successively apply Fillet with a radius of 9. 4. Make a special place for the sensor: it is necessary to select the square plane that is located in the middle of the case and successively apply Sketch > Project, Sketch > Offset and Construct > Extrude with a negative value.
Autodesk 123D breitenberg vehicle

Old Fashioned style staircase

2e2bc4ca
in Modeling
1 0 Intermediate
Learn BricsCAD with practical examples. This week, learn how to use advanced modeling techniques to make a set of stairs in CAD. Commands covered: DIV(DIVIDE) AR(ARRAY)/Path AR(ARRAY)/Polar SWEEP REV(REVOLVE) EXT(EXTRUDE)/Both sides 3P(3DPOLY) IAT(IMAGEATTACH)
BricsCAD divide sweep revolve array techniques modeling staircase stairs

What is Drawing Intent Recognition option in Bricscad?

Vaidas Guogis
in Design & CAD
0 0 Beginner
Bricscad Platinum provides the ability to edit non-parametric geometry without the need to understand the design history of the geometry. This allows to preserve the correct relationships between selected geometry (e.g., tangency, concentricity, ...) and makes the editing process less time and labor intensive. Design Intent option can be switched on/off and also different recognition options combined at your choice.
BricsCAD drawing option intent recognition

How to sweep object in Bricscad?

Vaidas Guogis
in Design & CAD
0 0 Beginner
It is easy to sweep object using XSWEEP command in Bricscad Platinum.
BricsCAD bricscad sweep object

How to create structural shape in Bricscad?

Vaidas Guogis
in Design & CAD
0 0 Beginner
Bricscad Platinum has X-Hardware library included. You can find shapes, bolts, nuts, washers and other parts inside.
BricsCAD shape structural bricscad creation

Is it possible to apply Direct Modeling features for X-Solids in Bricscad?

Vaidas Guogis
in Design & CAD
0 0 Beginner
Yes, it is possible, but after this kind of editing X-Solid's history will be lost. User must confirm he/she wants to do that.
BricsCAD modeling direct features x-solid

Exercise 7 || 90 Degree PVC Equal Tee

Arvind Kumar
in Modeling
0 0 Beginner
Designing 90 Degree PVC Equal Tee using solidwork. A pipe tee is used for distributing or collecting the fluid from the run pipe. It is a short piece of pipe with a 90-degree branch at the center. Two types of Tee are used in piping: Equal / Straight Tee and Reducing / Unequal Tee.
SolidFace designing solidwork 90 degree equal tee equal tee

Tutorial title: SolidFace Professional Training Tutorials #02

SolidFace Technology
in Design & CAD
0 0 Beginner
Welcome to the SolidFace Professional Training! Moving on at our lessons in 2D CAD, we'll get more profound on the commands: Rectangle, Relative Point, Circle, Multiple Lines, Osnap, Centerline, Dimensions, Dimensions Edition. Bem-Vindos ao Treinamento da SolidFace Profissional! Dando continuidade as nossas lições no CAD 2D, os features serão: Rectangle, Relative Point, Circle, Multiple Lines, Osnap, Centerline, Dimensions, Dimensions Edition.
SolidFace drawing engineering software 2d cad 3d tutorial solidface

SolidFace Professional Training Tutorials #01

SolidFace Technology
in Design & CAD
0 0 Beginner
Welcome to the SolidFace Professional Training! This video is an introduction to the SolidFace interface when we'll see some essential functions on the CAD 2D. We'll see the features Line, Multiple Lines, Linear Dimensions, Centerline, and the differences between Parametric and Non-Parametric Dimensions. Bem-Vindos ao Treinamento da SolidFace Profissional! Esse vídeo é uma introdução da interface do SolidFace, onde nós vamos ver algumas funções básicas na parte de CAD 2D, vamos ver os features Line, Multiple Lines, Linear Dimensions, Centerline, e as diferenças entre cotas paramétricas e não paramétricas.
SolidFace engineering tutorial 3d cad 2d software drawing solidface
White Stratasys Logo White GrabCAD Logo
© 2024 Stratasys Inc.
ABOUT US
RESOURCES
SOCIAL
Streamline Pro
Control
Print
Shop
PARTNERS
COMMUNITY
Contact Us Website Terms of Use Software Terms of Use Privacy policy Trademarks Your Data on GrabCAD
The Computer-Aided Design ("CAD") files and all associated content posted to this website are created, uploaded, managed and owned by third-party users. Each CAD and any associated text, image or data is in no way sponsored by or affiliated with any company, organization or real-world item, product, or good it may purport to portray.