Tutorials

  • Design & CAD ×
  • Modeling ×
  • Autodesk 123D ×
  • T-Flex CAD ×
  • GrabCAD Print ×

How to FDM Print for Part Sliding Clearance

GrabCAD Tutorials
in Assemblies
13 4 Intermediate
If you are 3D printing parts that have to fit/slide together after printing, you will need to put some sort of clearance between those parts in your CAD system. A good starting place is a clearance 2x the layer height you are going to print at, but you should make a few smaller test prints at different clearances to see if the 2x layer height rule holds for your particular situation and orientation. Have fun and happy printing!
GrabCAD Print sliding clearance printing 3d fdm

Matte or Glossy? Which Finish to Use for Your 3D Prints and When.

Alexa Nahum
in Modeling
9 0 Beginner
Matte or Glossy? That is the question. PolyJet users often ask themselves whether they should print a part with a matte finish or a glossy finish. And not without reason. The type of finish can totally alter the look, feel, color, and even strength and durability of two otherwise identical parts. Each option has its own benefits and implications that need to be considered. In this tutorial we will give an overview of matte and glossy, compare the pros and cons of each, and offer examples that clearly show what each finish type has to contribute. Finally, we will wrap up with a quick breakdown of when to use what.
GrabCAD Print polyjet disadvantages advantages cons pros support glossy matte

T-FLEX CAD 17 - Изучение системы

T-FLEX CAD ST
in Design & CAD
3 1 Beginner
Обучающие пособие включает в себя 5 видео, которые продемонстрируют Вам работу с интерфейсом системы T-FLEX CAD 17. Скачать бесплатную учебную версию T-FLEX CAD 17: https://tflexcad.ru/download/t-flex-cad-free/
T-Flex CAD cad t-flex

IMPROVEMENT OF THE TRAINING COURSE OF 3D MODELING AND PROTOTYPTING

Sergey Strygin
in Modeling
2 2 Expert
The monograph discusses the features of the use of additive technologies in the scientific-educational process of the University. Areas of application of 3D modeling and prototyping related to training students. The training course is based on examples of virtual modeling and design toys aimed at the development of scientific and technical creativity of children, educational models, and also finished products and their components, including logos, emblems.
T-Flex CAD logos models educational toys creative technology additive

T-FLEX CAD 17 Basics

T-FLEX CAD ST
in Modeling
2 0 Beginner
The tutorial includes 5 videos that will show you how to work with the interface of the T-FLEX 17 CAD system. Download the free training version of T-FLEX CAD 17: https://www.tflex.com/resources/tflexcadst/
T-Flex CAD interface basics cad t-flex tflex

Stacking Your Parts in Z for FDM

Stratasys
in Assemblies
2 0 Intermediate
Have long thin flat parts you’ve always wanted to print right on top of each other in FDM but the slicer never allowed you to? Learn how to use this exclusive new feature in GrabCAD Print Pro!
GrabCAD Print fdm stacking stratasys 3d printing software grabcad print pro

tutorial- How to make a rotor blower (the answer to the request) in T-Flex CAD Parametric 2D/3D

Tomek F.
in Design & CAD
2 0 Intermediate
Thank you I hope that I helped
T-Flex CAD

3D Modeling of a Braitenberg Vehicle in 4 Steps using Autodesk 123D Design

Yoana Ivanova
in Modeling
2 0 Intermediate
This tutorial is suitable for designers who have a basic knowledge of using the open source product Autodesk 123D Design. The steps to build a Breitenberg vehicle are as follows: 1. Modeling a wheel: a cylinder with a diameter of 2 cm and a height of 0.5 cm is placed in the workspace. Drill a hole in it by drawing a circle with a diameter of 0.3 cm and extruding - 0.5 cm with the Extrude tool. We soften the edges of the cylinder with Fillet Radius: 0.5. 2. Clone the wheel: rotate the resulting wheel 90° along the Z axis and copy it with Ctrl+C and Ctrl+V. 3. Modeling the vehicle body: regarding the design of the vehicle body, there are various options. In this case the author models a classic vehicle, which is most often shown in the bibliographic sources. After drawing and extruding a surface with the desired shape we apply Fillet with radius 35 on the back edge and with 30 on the front edge for a contemporary design (i could provide more images if it is needed). On the selected side edges we successively apply Fillet with a radius of 9. 4. Make a special place for the sensor: it is necessary to select the square plane that is located in the middle of the case and successively apply Sketch > Project, Sketch > Offset and Construct > Extrude with a negative value.
Autodesk 123D breitenberg vehicle

T-FLEX CAD 17 - 3D Профили и Опорная геометрия

T-FLEX CAD ST
in Modeling
2 1 Beginner
Ролик демонстрирует работу с опорной геометрией - 3D Профилями, описывает их классификацию, типы параметризации, методы создания. Рассмотрены другие типы 3D элементов - рабочие плоскости, поверхности, 3D пути, 3D узлы и прочее.
T-Flex CAD geometry reference t-flex profile 3d cad

T-FLEX CAD 16. 3D model of the flange. Primitive

Victor Stasevsky
in Modeling
2 0 Beginner
Commands that unite the Primitive group allow you to create basic geometric bodies: Parallelepiped, Cylinder, Cone, Ball, Torus, Prism and Pyramid without creating additional construction elements. Source: https: //www.tflexcad.ru/help/cad/15/index.html? Primitive.htm Link to the lesson: 1
T-Flex CAD sv t-flexcad

Создание ролика в T-FLEX CAD 17

T-FLEX CAD ST
in Modeling
2 0 Beginner
В ходе урока вы познакомитесь с основными методами и принципами работы в T-FLEX CAD 17 на практическом примере.
T-Flex CAD roller example 3d cad t-flex

Урок 5. Создание 3D-модели фланцевой прокладки

Victor Stasevsky
in Modeling
1 0 Beginner
Краткий вводный курс по созданию 3D модели:https://www.tflexcad.ru/help/cad/15/index.html?beginning_3d.htm
T-Flex CAD cad t-flex vis

T-FLEX CAD 17 - Создание 3D модели фланца

T-FLEX CAD ST
in Modeling
1 1 Beginner
Урок помогает овладеть базовыми инструментами работы в T-FLEX CAD 17. С помощью видео вы построите 3D модель фланца, а также создадите его 2D проекцию.
T-Flex CAD t-flex cad modeling flange

Урок 8. 3D-модель фланца. Примитив

Victor Stasevsky
in Modeling
1 0 Beginner
Команды, объединённые в группу Примитив, позволяют создавать базовые геометрические тела: Параллелепипед, Цилиндр, Конус, Шар, Тор, Призму и Пирамиду без создания дополнительных элементов построения. Источник : https://www.tflexcad.ru/help/cad/15/index.html?primitive.htm
T-Flex CAD cad t-flex vis

T-FLEX CAD 17 - Базовые инструменты 3D моделирования

T-FLEX CAD ST
in Modeling
1 0 Beginner
Видео демонстрирует процесс создания 3D модели типовой детали "Фланец" различными способами. Рассматриваются методы построения 3D профилей, а также работа команд Вращение, Отверстие и Сглаживание рёбер. Для работы установите бесплатную версию T-FLEX CAD 17 - https://www.tflexcad.ru/download/t-flex-cad-free/
T-Flex CAD engineering mechanical flange basics t-flex cad
White Stratasys Logo White GrabCAD Logo
© 2024 Stratasys Inc.
ABOUT US
RESOURCES
SOCIAL
Streamline Pro
Control
Print
Shop
PARTNERS
COMMUNITY
Contact Us Website Terms of Use Software Terms of Use Privacy policy Trademarks Your Data on GrabCAD
The Computer-Aided Design ("CAD") files and all associated content posted to this website are created, uploaded, managed and owned by third-party users. Each CAD and any associated text, image or data is in no way sponsored by or affiliated with any company, organization or real-world item, product, or good it may purport to portray.