Tutorials

  • Drafting ×
  • Dimensioning / Tolerancing ×
  • Composites ×
  • Autodesk Inventor ×
  • FreeCAD ×
  • Luxology ×
  • Powermill ×

Cap screws and machine screws

dea
in Drafting
65 12 Intermediate
Cap screws and machine screws are similar in shape, differing only in their relative sizes. Machine screws are usually smaller in size, compared to cap screws. These are used for fastening two parts, one with clearance hole and the other with tapped hole. The clearance of the unthreaded hole need not be shown on the drawing as its presence is obvious. Figure 5.24 shows different types of cap and machine screws, with proportions marked Cap screws are produced in finish form and are used on machines where accuracy and appearance are important. As cap screws are inferior to studs, they are used only on machines requiring few adjustments and are not suitable where frequent removal is necessary. These are produced in different diameters, upto a maximum of 100 mm and lengths 250 mm. Machine screws are produced with a naturally bright finish and are not heat treated. They are particularly adopted for screwing into thin materials and the smaller ones are threaded throughout the length. They are used in fire-arms, jigs, fixture and dies. They are produced in different diameters upto a maximum of 20 mm and lengths upto 50 mm.
Autodesk Inventor screw cap

Mechanical stress simulation (FreeCAD 0.19 • FEM Workbench )

Quentin Plisson
in Dimensioning / Tolerancing
3 0 Intermediate
This tutorial give an overview of FEM Workbench on FreeCAD 0.19 which allows mechanical analysis by the finite element method. We will look at the steps to follow to applies a force of given value [N] to selected target geometry. Then perform a finite element analysis without going into details of the calculations.
FreeCAD stress calculation spoon analysis mechanical 0-19 fea fem

Create blue print by Autodesk Inventor

Ebrahim Zokaee
in Drafting
2 1 Intermediate
In this tutorial, study how to create a blue print by Autodesk inventor.
Autodesk Inventor inventor drafting blue print

FreeCAD 0.20 - TechDraw Folha de Desenho 2D

Cristiano Alves
in Dimensioning / Tolerancing
1 0 Intermediate
Nesta aula de FreeCAD vamos aprender a personalizar as folhas de desenho 2D, inserir sua logomarca e também como criar sua própria folha do zero seguindo a norma NBR 10.068
FreeCAD desenho 2d nbr 10068 folhas de desenho 2d freecad

Use Sketches as Calculators

ROTHMECH
in Dimensioning / Tolerancing
0 0 Intermediate
Using Autodesk Inventor sketches as design calculators.
Autodesk Inventor tool inventor autodesk parameters design calculator sketch
White Stratasys Logo White GrabCAD Logo
© 2024 Stratasys Inc.
ABOUT US
RESOURCES
SOCIAL
Streamline Pro
Control
Print
Shop
PARTNERS
COMMUNITY
Contact Us Website Terms of Use Software Terms of Use Privacy policy Trademarks Your Data on GrabCAD
The Computer-Aided Design ("CAD") files and all associated content posted to this website are created, uploaded, managed and owned by third-party users. Each CAD and any associated text, image or data is in no way sponsored by or affiliated with any company, organization or real-world item, product, or good it may purport to portray.