Tutorials

  • Dimensioning / Tolerancing ×

Some concepts about DIN 5480 spline dimension Part 1

Carlos Soler
in Dimensioning / Tolerancing
35 8 Expert
For some questions that I received. I will upload some tutorials about DIN 5480 dimensions. This is a tutorial explaining some concepts on dimensions of the splines ruled by DIN 5480
SOLIDWORKS clearance tolerance reference diameter dimension din 5480

How to change lineweight in AutoCAD?

Karajko CAD
in Dimensioning / Tolerancing
0 0 Beginner
A quick tip about changing lineweight in AutoCAD.
AutoCAD properties autocad lineweight lines

Como dimensionar la matriz y los punzones de un troquel de corte

Hugo Martin
in Dimensioning / Tolerancing
6 1 Expert
Con este tutorial pretendemos explicar como dimensionar la matriz y los punzones de un troquel de corte, garantizando la tolerancia de fabricación de la pieza así como logrando la mayor vida útil del troquel.
Autodesk Inventor tolerancias Dimensiones

NX 11: Interpart Expression

Anand Panchal
in Dimensioning / Tolerancing
5 2 Intermediate
Interpart Expression: To create or edit a link to an expression in another part. To apply tolerance and link two dimensions in assembly.
NX Unigraphics dimensioning aseembly inter expression interpart tolerance unigraphics nx

Some concepts about DIN 5480 spline dimension Part 2

Carlos Soler
in Dimensioning / Tolerancing
12 3 Expert
Continuation of part 1. https://grabcad.com/tutorials/some-concepts-about-din-5480-spline-dimension-part-1
SOLIDWORKS teeth dimension 5480 din

Some concepts about DIN 5480 spline dimension Part 3

Carlos Soler
in Dimensioning / Tolerancing
21 0 Expert
In this tutorial, I will explain the concept of addendum correction (modification) and how is applied to DIN 5480 splines
SOLIDWORKS joint connection gear modification correctio addendum 5480 din

How to turn off visibility of relations in SolidWorks?

Karajko CAD
in Dimensioning / Tolerancing
1 0 Beginner
How to turn off visibility of relations in SolidWorks?
SOLIDWORKS relations solidworks

How to Switch Angles of Projection in SolidWorks Drawings

Usman Akhtar
in Dimensioning / Tolerancing
1 0 Beginner
In this solidworks drawings tutorial you will learn how to change first or third angle of projection in settings of solidworks.
SOLIDWORKS solidworks projection angle

Single Inspection Dimension for Holes

Stephen Nyberg
in Dimensioning / Tolerancing
6 1 Beginner
I was having a hard time figuring out a good way to dimension a hole with both the diameter and depth of a hole with GD&T in a singe dimension. This dimension also required inspection so I wanted the inspection circle around the dimension and have the properties linked to the model. I did a lot of searching on the internet and did not find a good solution. Here is my solution. please leave your comments if you have a better way to do this.
SOLIDWORKS gd-t hide-show annotations note drawing dimension hole inspection

Tolerancias y acabado superficial norma DIN

Oscar Roberto Tellez Humerez
in Dimensioning / Tolerancing
4 0 Beginner
Tutorial de como puede hacerse planos en inventor, aplicando la normativa DIN
Autodesk Inventor tolerancia din norma superficial acabado

Mechanical stress simulation (FreeCAD 0.19 • FEM Workbench )

Quentin Plisson
in Dimensioning / Tolerancing
3 0 Intermediate
This tutorial give an overview of FEM Workbench on FreeCAD 0.19 which allows mechanical analysis by the finite element method. We will look at the steps to follow to applies a force of given value [N] to selected target geometry. Then perform a finite element analysis without going into details of the calculations.
FreeCAD stress calculation spoon analysis mechanical 0-19 fea fem

(VIDEO) How to Size Isometric View (3D View) Detailing - Solidworks

Infinity Projetos Brasil
in Dimensioning / Tolerancing
5 0 Beginner
WATCH THE VIDEO TEACHING BELOW
SOLIDWORKS measure drafiting size dimension view isometric detailing solidworks

GD&T essential for engineering

tony wang
in Dimensioning / Tolerancing
20 1 Beginner
GD&T is essential for engineering projects, GD&T tell engineers how reasonable and feasibility to realize the thing imagined.
CATIA iso1101 y14-5 asme up stack tolerance gd-t

NX 11: Inter-part Expression 2

Anand Panchal
in Dimensioning / Tolerancing
2 0 Intermediate
Interpart Expression: To create or edit a link to an expression in another part. To apply tolerance and link two dimensions in assembly. Bottom-Up approach
NX Unigraphics dimensioning 11 unigraphics tolerancing expression interpart assembly nx

AutoCAD | Working with layout view

Resa Ant
in Dimensioning / Tolerancing
15 1 Intermediate
In this tutorial video, you can treat your layout as a sheet of paper upon which you can arrange the parts of your drawing systematically, as well as add annotations and other details before creating the final output.
AutoCAD annotation dimensioning drawing detail 3d autocad view layout
White Stratasys Logo White GrabCAD Logo
© 2024 Stratasys Inc.
ABOUT US
RESOURCES
SOCIAL
Streamline Pro
Control
Print
Shop
PARTNERS
COMMUNITY
Contact Us Website Terms of Use Software Terms of Use Privacy policy Trademarks Your Data on GrabCAD
The Computer-Aided Design ("CAD") files and all associated content posted to this website are created, uploaded, managed and owned by third-party users. Each CAD and any associated text, image or data is in no way sponsored by or affiliated with any company, organization or real-world item, product, or good it may purport to portray.