Tutorials

  • Design & CAD ×
  • Drafting ×
  • Autodesk 3ds Max ×
  • Autodesk Alias ×
  • Luxology ×
  • Powermill ×
  • GrabCAD Print ×

How to FDM Print for Part Sliding Clearance

GrabCAD Tutorials
in Assemblies
13 4 Intermediate
If you are 3D printing parts that have to fit/slide together after printing, you will need to put some sort of clearance between those parts in your CAD system. A good starting place is a clearance 2x the layer height you are going to print at, but you should make a few smaller test prints at different clearances to see if the 2x layer height rule holds for your particular situation and orientation. Have fun and happy printing!
GrabCAD Print sliding clearance printing 3d fdm

how to model a car in autodesk alias????

kodg
in Design & CAD
5 3 Intermediate
Surface modeling Aston Martin One-77 in the Alias surface from AUTODESK
Autodesk Alias

Tutorials:-Working with Power MILL "PART IV" Finish Machining Strategies.

Sourbh
in Design & CAD
4 0 Intermediate
Finishing strategies machine the actual component form and where applicable, follow on from the Area Clearance operation. Suitable values are required to control the accuracy and amount of excess material to be left on a component by a tool path. The parameters used for this purpose are called Thickness and Tolerance
Powermill suman sourbh powermill clearance tutorials educational cam power area 3d mill engineering

Tutorial How to Make a Dazzling Golden Pearl Teapot in 3D StudioMax

arber leka
in Design & CAD
3 1 Intermediate
here :) follow please
Autodesk 3ds Max studiomax dazzling make how tutorial golden teapot pearl 3d

Industrial Equipment Modeling 3ds max

Yağmur Medya - İsmail Ayvaz YANAR
in Modeling
3 0 Intermediate
I wanna show how can we design an industrial equipment modeling with reference images using by 3ds max. How can we design an equipment with Reference Images ? - 3ds Max Modeling How can we design a machine with Reference Images ? Speed Modeling tutorial, Industrial Machinery and Equipment Modeling Techniques, 3ds Max industrial modeling and rendering, #industrial #modeling #3danimation
Autodesk 3ds Max images reference visualization design rendering modeling 3dsmax industrial

3ds max interior design tutorial - How to use vray materials in slate material editor (part 2)

TeachLAB27
in Modeling
2 0 Intermediate
Lesson 6 Content : - Vray material setting in slate material editor
Autodesk 3ds Max 3ds tutorials design interior tutorial material setting vray

When the toolpath is to be verified to be checked for gouges?

fariborz
in Design & CAD
2 0 Intermediate
Hello. I hope your answer is yes
Powermill

Stacking Your Parts in Z for FDM

Stratasys
in Assemblies
2 0 Intermediate
Have long thin flat parts you’ve always wanted to print right on top of each other in FDM but the slicer never allowed you to? Learn how to use this exclusive new feature in GrabCAD Print Pro!
GrabCAD Print fdm stacking stratasys 3d printing software grabcad print pro

3D Modeling of a Polar Rose Using 3DS Max - Part II

Yoana Ivanova
in Modeling
2 0 Intermediate
MAKING THE SEEDS: 1. Creating the shape of a seed: a seeds is modeled based on a standard sphere primitive, slightly deformed with a Noise modifier to achieve a higher level of realism. 2. Applying the material to the seeds: the material applied to the seeds is intended to give them an icy effect. Resembling white pearls, they contrast against the background of the fine velvet petals. 3. Creating the material: the setting in Material Editor are shown in the figure in Step 3.
Autodesk 3ds Max flower polar rose red rose rose seed

Tutorials:-Working with Power MILL "PART IV" Finish Machining Strategies.

Sourbh
in Design & CAD
2 0 Intermediate
Raster, Radial, Spiral, and Pattern Finishing. Introduction. This section will cover Finishing strategies created by the downward projection of a Pattern, which include four types, Raster, Radial, Spiral and (user defined) Pattern. PowerMILL generates the toolpaths by projecting a wireframe form down the Z-axis onto the model. The standard patterns applied in Raster, Radial, and Spiral are achieved by entering values directly into the Finishing Form. The resultant Pattern can be displayed by selecting Preview before executing the command by selecting Apply. The Pattern option requires a user-defined geometric form (active Pattern), which is projected down Z onto the model as a tool path.
Powermill suman sourbh powermill clearance tutorials educational cam power area 3d mill engineering

3ds max interior design tutorial (1/12) - Set up 3D layout plan with DWG

TeachLAB27
in Modeling
2 0 Intermediate
Lesson 1 Content : How to set up 3d layout plan with dwg.file Classic option 1 : Line object and Extrude New option 2 : AEC Extended "wall"
Autodesk 3ds Max tutorial max 3ds dwg plan layout 3d

long hair for videogame characters

fernando gonzalez
in Modeling
1 0 Intermediate
In this video i´ll show you how to create long hair for 3d models
Autodesk 3ds Max cards zbrush tutorial hair long

tutorial 9 ( how to make real pool in 3dmax with mental ray render )

Armin Yousefi Kanani
in Design & CAD
1 2 Intermediate
hi https://grabcad.com/library/swimming-pool-2
Autodesk 3ds Max pool render with real ray mental how make 3dmax

how can i download luxology materials for solid works?

Jeverson Fronza
in Design & CAD
1 0 Intermediate
Do not know if still has doubts, but to access the download, you have to have a license the software "MODO" or a client account of SolidWorks (Customer Portal).
Luxology

3ds max interior design tutorial - How to import and modify door and window

TeachLAB27
in Modeling
1 0 Intermediate
Lesson 2 Content : - How to use template door and window in 3ds max - How to import and modify 3d models download from other site
Autodesk 3ds Max template 3dsmax door window tutorial max 3ds
White Stratasys Logo White GrabCAD Logo
© 2024 Stratasys Inc.
ABOUT US
RESOURCES
SOCIAL
Streamline Pro
Control
Print
Shop
PARTNERS
COMMUNITY
Contact Us Website Terms of Use Software Terms of Use Privacy policy Trademarks Your Data on GrabCAD
The Computer-Aided Design ("CAD") files and all associated content posted to this website are created, uploaded, managed and owned by third-party users. Each CAD and any associated text, image or data is in no way sponsored by or affiliated with any company, organization or real-world item, product, or good it may purport to portray.