Tutorials

  • Assemblies ×
  • Kinematics ×
  • AutoCAD ×
  • CATIA ×
  • Fusion 360 ×
  • Onshape ×
  • VectorWorks ×
  • VRML / WRL ×

Robotic Tank Tread Assembly- Fusion 360 Tutorial (Tracked Robot Part 2)

Engineering Juice
in Assemblies
10 3 Beginner
#Fusion360 #Fusion360Tutorial #AutodeskFusion360 Buy this chain: https://amzn.to/3f2FZEl In this series, we will design and develop a tracked, tank-like mobile robot optimized for use on sand and in desert environments. The modeling of the treads, custom sprocket, idler rollers and 3D printed suspension system will be shown in great detail. We will first create the chain links themselves and the tread pieces, then pattern them along the shape of the loop. Once we finish this, we will create the custom sprocket and motor connection followed by the idler spindle and finally the suspension system. In the end, we can mirror our entire assembly to the other side to create the right side tread. Working on only one side at a time makes it easier on our computers and allows us to work faster with less lag-time.
Fusion 360 robotics tutorial 360 fusion

Scooby_doo car

Capragiu Mihai
in Assemblies
9 0 Beginner
Estaffette
AutoCAD

Robotic Suspension System 4- Fusion 360 Tutorial (Tracked Robot Part 9)

Engineering Juice
in Assemblies
6 0 Beginner
#Fusion360 #Fusion360Tutorial #AutodeskFusion360 Robotic Suspension System 4- Fusion 360 Tutorial (Tracked Robot Part 9)
Fusion 360 robot robotics lesson tutorial 360 fusion

Boat Hull Design-using Autodesk Fusion 360

leo zeng
in Assemblies
5 0 Beginner
How to design a boat hull using loft in fusion 360.
Fusion 360 360 fusion cad hull boat

How to Package Electronic Components in Fusion 360: Tutorial

Engineering Juice
in Assemblies
5 1 Beginner
#Fusion360 #Fusion360Tutorial #AutodeskFusion360
Fusion 360 tutorial 360 fusion

Intro to Dynamic Simulation CATIA 3DX [Part 1]

Maxime Chagnot
in Assemblies
4 0 Beginner
Hello 3DExperience Fans :) I took a 3-month break from YouTube to get fresh new ideas and now I am back to provide you new videos and tutorial for 3DExperience! Today's video is an introduction to Dynamic Simulation on CATIA 3DExperience R2020x. In first part we will talk about friction coefficient in contacts. First you will learn how to create a mechanism, add weight and create contacts between component. Then you will create a dynamic scenario in Mechanical Systems Experience. You will be able to create a gravity excitation and compute the dynamic simulation. The case of the simulation is a cube sliding on a ramp. You can play with the angle of the ramp and the friction coefficient to obtain different results in the dynamic simulation. Enjoy and remember to stay home! Hope this video will be helpful for you to learn more about 3DExperience :D Find the model on this GrabCad link Please Like, Comment, Share and Subscribe ;)
CATIA video contacts friction ramp sliding gravity simulation dynamic

Fusion 360 | X-BOX Series X Controller | Part 11

CAD Pond
in Assemblies
4 1 Beginner
In this video, we assemble the different components of the game controller. -------------------- Happy Modeling
Fusion 360 game controller xbox cam cad

Four Stroke Engine Assembly - Working

Manas Shrivastava
in Assemblies
4 0 Beginner
The tutorial comprises of steps to make a four-stroke Internal Combustion Engine using basic tools in Fusion 360. The viewer will have to pause the video at most of the steps, as this is a fast-paced overview to keep the tutorial short. Thanks! Link to video: https://drive.google.com/file/d/13n3k7WpurUmLhDXHRZ5agKdFSUSOdl5x/view?usp=sharing
Fusion 360 slidercrank bike car automotive mechanicalengineering design mechanism engine

Catia course Free For Beginners

Amit Mourya
in Assemblies
4 0 Beginner
Our Facebook Page : https://www.facebook.com/EngineeringExplanation Our website: www.engineerknow.com FREE COURSE LINK SOLIDWORKS BEGINNER TO ADVANCE: https://youtu.be/iYYHmvnlSQo Solidworks animation and Motion analysis udemy course link : https://www.udemy.com/course/solidworks-animation-and-motion-analysis/?referralCode=8F40E7F83856CFF0C5FE [if you need discount coupon message me on my facebook page] [FREE]SOLIDWORKS SIMULATION COURSE FOR BEGINNERS: https://youtu.be/XJ_BcNbx_SE our new Youtube channel : Engineerknow : [ for understanding how the machine works and other engineering thing] https://www.youtube.com/channel/UCU5LqyPgX7E8ri4G8ag9xZQ Mechanical Coder : [Coding in Python for mechanical engineers] https://www.youtube.com/channel/UC__7TWjURc7KnChqoQrAYoQ for INDIAN ONLY : https://www.youtube.com/channel/UCDws0ifI1mdQHgJWUSBzrOA Time Stamp 00:00 Introduction 01:07 Part Design and sketch introduction 01:58 User Interface Introduction 04:02 Under define , over define and fully define sketch
CATIA catia assembly tutorial catia assembly tu catia full course english catia full course catia free course catia course catia tutorial cad knowledge

CATIA Assembly Design for beginners- Bush Type Flexible Coupling- 6

Bhushan chougule
in Assemblies
3 0 Beginner
CATIA Assembly Design Workbench Design of Bush Type Flexible Coupling using CATIA V5. Please subscribe to my YouTube Channel "CAD CAM CAE Learning Solutions" for daily videos on CAD/CAM/CAE software tutorials and projects.
CATIA modeling practice assembly mechanical engineer design cad catia

How to Use Threaded Inserts in Your 3D Printed Parts- Example with DC Motor in Fusion 360

Engineering Juice
in Assemblies
3 2 Beginner
This tutorial illustrates the modeling and use of threaded bras inserts in 3d printed parts and set screws to clamp down on DC motor flats.
Fusion 360 printing print 3d screw gears motor dc design tutorial 360 fusion

Learn Catia V5 | V Block Assembly

Muthiah R
in Assemblies
3 0 Beginner
V Block Assembly in Catia
CATIA beginners catia assembly

Learn how to make slider joint between two components~ using Autodesk Fusion 360.

Harsh Priyanshu
in Assemblies
3 0 Beginner
Learn how to make a slider joint between two components using Autodesk Fusion 360. I hope you enjoyed the designing process and the model. if you enjoyed the process and model, then hit subscribe and like the video. and don't forget to comment on your views on this model and process.
Fusion 360 autodesk 360 fusion

[Video] Mechanism Animation - CATIA 3DXP R19x

Maxime Chagnot
in Assemblies
2 1 Beginner
Hello Everyone, Several subscribers asked me to create a video about Mechanism in CATIA 3DExperience, so this is the topic in that new tutorial!!! You will learn how to assemble parts together using engineering connections and then you will learn how to animate a mechanism. The assemble is a Double Cardan mounted on a gear and a prismatic. You will see how to create these engineering connections and add a command to control them. After the assembly phase, you will create a mechanism and manually move the different commands. Finally, you will create a mechanism simulation and link different motors to the command. Once the simulation is run, you can replay the animation and generate some plot, traces and swept volumes of parts. Find the models on these GrabCad links: - https://grabcad.com/library/double-cardan-to-mount-1 - https://grabcad.com/library/double-cardan-mounted-1 Please Like, Comment, Share and Subscribe ;) Inspired by @cad.gif on instagram https://www.instagram.com/cad.gif/?hl=fr Youtube Channel: https://www.youtube.com/user/thang010146
CATIA connections dynamic kinematic animation assembly mechanism 3dexperience catia

How to Make a DC Motor & Sprocket Assembly: Fusion 360 Robotics Tutorial for Beginners (Robot Part 3)

Engineering Juice
in Assemblies
2 0 Beginner
#Fusion360 #Fusion360Tutorial #AutodeskFusion360 In this series, we will design and develop a tracked, tank-like mobile robot optimized for use on sand and in desert environments. The modeling of the treads, custom sprocket, idler rollers and 3D printed suspension system will be shown in great detail. We will first create the chain links themselves and the tread pieces, then pattern them along the shape of the loop. Once we finish this, we will create the custom sprocket and motor connection followed by the idler spindle and finally the suspension system. In the end, we can mirror our entire assembly to the other side to create the right side tread. Working on only one side at a time makes it easier on our computers and allows us to work faster with less lag-time. Buy this chain for projects: https://amzn.to/3f2FZEl
Fusion 360 project robotics assemblies beginner tutorial 360 fusion
White Stratasys Logo White GrabCAD Logo
© 2024 Stratasys Inc.
ABOUT US
RESOURCES
SOCIAL
Streamline Pro
Control
Print
Shop
PARTNERS
COMMUNITY
Contact Us Website Terms of Use Software Terms of Use Privacy policy Trademarks Your Data on GrabCAD
The Computer-Aided Design ("CAD") files and all associated content posted to this website are created, uploaded, managed and owned by third-party users. Each CAD and any associated text, image or data is in no way sponsored by or affiliated with any company, organization or real-world item, product, or good it may purport to portray.