Tutorials

  • Modeling ×
  • Tooling ×
  • AutoCAD Electrical ×
  • Autodesk 123D ×
  • Onshape ×
  • Pro/Engineer Wildfire ×
  • SolidFace ×
  • VectorWorks ×

Onshape Tutorial Exersice

Çağın Gergin @chagocad
in Modeling
11 0 Intermediate
Sometimes you will not have Solidworks or a similar program installed on your computer. And you may have to make a model immediately. In such situations, Onshape is great. The link to the modeling file from the sample technical drawing is given below. https://cad.onshape.com/documents/51b10db64d8c10d69e04f4da/w/b4cd4b090cea13100d679675/e/741f8ec43a660ff55252cd29
Onshape onshape modellig loft free extrude

volleyball in Onshape

Jens Nielsen
in Modeling
4 0 Intermediate
I wanted to get to know Onshape better and had a look at the split, transform and pattern command. I repeated this in SolidWorks and it is the same workflow.
Onshape volleyball

Onshape for Absolute Beginners

Engineering Juice
in Modeling
3 0 Beginner
https://youtu.be/2utLjjkXpIg
Onshape onshape beginner onshape tutorial onshape beginners onshape cad tutorial onshape modeling tutorial onshape for beginners onshape tutorial for beginners onshape tutorial

How To Create Chess Queen

Sneha Bhamidipaty
in Modeling
3 1 Beginner
Chess Queen on OnShape
Onshape

Onshape Tutorial for Absolute Beginners

Engineering Juice
in Modeling
1 1 Beginner
https://youtu.be/2utLjjkXpIg
Onshape onshape tutorial

AutoCad Electrical-2018 for Students,Beginners

Prajwith Ullal
in Modeling
2 0 Beginner
Autocad Electrical-2018 2D design Tutorial. I am Electrical Engineering Student from Karnataka(India), As a learner I have started creating tutorial, Please support me to grow up, please comment your suggestions. share the tutorial with your friends circle. Thank You.
AutoCAD Electrical electrical students autocad

3D Modeling of a Braitenberg Vehicle in 4 Steps using Autodesk 123D Design

Yoana Ivanova
in Modeling
2 0 Intermediate
This tutorial is suitable for designers who have a basic knowledge of using the open source product Autodesk 123D Design. The steps to build a Breitenberg vehicle are as follows: 1. Modeling a wheel: a cylinder with a diameter of 2 cm and a height of 0.5 cm is placed in the workspace. Drill a hole in it by drawing a circle with a diameter of 0.3 cm and extruding - 0.5 cm with the Extrude tool. We soften the edges of the cylinder with Fillet Radius: 0.5. 2. Clone the wheel: rotate the resulting wheel 90° along the Z axis and copy it with Ctrl+C and Ctrl+V. 3. Modeling the vehicle body: regarding the design of the vehicle body, there are various options. In this case the author models a classic vehicle, which is most often shown in the bibliographic sources. After drawing and extruding a surface with the desired shape we apply Fillet with radius 35 on the back edge and with 30 on the front edge for a contemporary design (i could provide more images if it is needed). On the selected side edges we successively apply Fillet with a radius of 9. 4. Make a special place for the sensor: it is necessary to select the square plane that is located in the middle of the case and successively apply Sketch > Project, Sketch > Offset and Construct > Extrude with a negative value.
Autodesk 123D breitenberg vehicle

How to change measurement units in Onshape?

Yash Bhaskar
in Modeling
1 0 Beginner
Video tutorial to learn how to change units in Onshape.
Onshape units onshape

Wheatley core

Lee Wells
in Modeling
2 0 Beginner
a tutorial on how i made a personality core
Onshape steam valve game robot core portal

Exercise 7 || 90 Degree PVC Equal Tee

Arvind Kumar
in Modeling
0 0 Beginner
Designing 90 Degree PVC Equal Tee using solidwork. A pipe tee is used for distributing or collecting the fluid from the run pipe. It is a short piece of pipe with a 90-degree branch at the center. Two types of Tee are used in piping: Equal / Straight Tee and Reducing / Unequal Tee.
SolidFace designing solidwork 90 degree equal tee equal tee
White Stratasys Logo White GrabCAD Logo
© 2024 Stratasys Inc.
ABOUT US
RESOURCES
SOCIAL
Streamline Pro
Control
Print
Shop
PARTNERS
COMMUNITY
Contact Us Website Terms of Use Software Terms of Use Privacy policy Trademarks Your Data on GrabCAD
The Computer-Aided Design ("CAD") files and all associated content posted to this website are created, uploaded, managed and owned by third-party users. Each CAD and any associated text, image or data is in no way sponsored by or affiliated with any company, organization or real-world item, product, or good it may purport to portray.