Tutorials

  • BlenderCAD ×
  • Powermill ×
  • Rendering ×

Using Blender for Technical design

Christie S
in Modeling
22 2 Intermediate
Blender 3D may seem for non-user quite difficult to approach, and yet there are a lot of ways to use it accuratly with measures and tree function structure. This tutorial will design a precise screw. It is a near way of approaching technical design. Yes, it will not be as quite easy as solidwork or others, but the aim is to be more precise with blender.
BlenderCAD precise drawing parametric accurate

Need to put lights into a render.

Jitender Chaurasia (JittuARTS)
in Design & CAD
5 0 Intermediate
Use keyshot IES light...By this you can give real looking lightening effect
Rendering rendering lights

Tutorials:-Working with Power MILL "PART IV" Finish Machining Strategies.

Sourbh
in Design & CAD
4 0 Intermediate
Finishing strategies machine the actual component form and where applicable, follow on from the Area Clearance operation. Suitable values are required to control the accuracy and amount of excess material to be left on a component by a tool path. The parameters used for this purpose are called Thickness and Tolerance
Powermill suman sourbh powermill clearance tutorials educational cam power area 3d mill engineering

How to create an environment in keyshot by yourself?

Jitender Chaurasia (JittuARTS)
in Design & CAD
3 0 Intermediate
You can make your own environment by editing your HDRI
Rendering environment keyshot rendering

When the toolpath is to be verified to be checked for gouges?

fariborz
in Design & CAD
2 0 Intermediate
Hello. I hope your answer is yes
Powermill

Tutorials:-Working with Power MILL "PART IV" Finish Machining Strategies.

Sourbh
in Design & CAD
2 0 Intermediate
Raster, Radial, Spiral, and Pattern Finishing. Introduction. This section will cover Finishing strategies created by the downward projection of a Pattern, which include four types, Raster, Radial, Spiral and (user defined) Pattern. PowerMILL generates the toolpaths by projecting a wireframe form down the Z-axis onto the model. The standard patterns applied in Raster, Radial, and Spiral are achieved by entering values directly into the Finishing Form. The resultant Pattern can be displayed by selecting Preview before executing the command by selecting Apply. The Pattern option requires a user-defined geometric form (active Pattern), which is projected down Z onto the model as a tool path.
Powermill suman sourbh powermill clearance tutorials educational cam power area 3d mill engineering

How to Open Your Model in KeyShot

KeyShot
in Design & CAD
2 1 Intermediate
Within GrabCAD, you have a pulldown in the model viewing screen with the option to Open with KeyShot. When a model is open inside a project of the Workbench interface, you and any collaborators will see a Open With menu above the model in the upper right corner. With a single click, members of the project are able to select Open with KeyShot to launch and open the model directly inside KeyShot. With KeyShot installed, the model will open immediately inside the KeyShot realtime rendering environment. A video of the functionality can be viewed here. Once you have your model in KeyShot, you're ready to render! To get started quickly, see the quick tips and tutorials available here: http://keyshot.com/learning/
Rendering keyshot 3d-rendering

problem : powermill changes the orientation of files imoprted in igs format from solidworks

Sourbh
in Design & CAD
1 0 Intermediate
Don't worry about the orientation just simply rotate it through your mouse. and If you are thinking of wrong axis direction than just follow these steps:-
Powermill solidworks powermill

How to add a label onto a surface in Keyshot without bleedover to other surfaces?

Ahmed Zawad Ul Hoque Shovon
in Design & CAD
1 1 Intermediate
The following is an easy way to do it in KeyShot itself..Hope it helps...
Rendering label keyshot surface rendering solidworks

Tutorials:-Working with Power MILL "PART V" Toolpath Leads and Links

Sourbh
in Design & CAD
1 0 Intermediate
Hello Friends, This tutorial continues for power mill Guidance.
Powermill paths sourbh powermill lead links tool

Tutorials:-Working with Power MILL "PART V" Toolpath Leads and Links

Sourbh
in Design & CAD
1 0 Intermediate
Z Heights Skim and Plunge distance provide variable control of rapid move heights within a component. These operate in conjunction with Safe Z and Start Z to minimize slow and unnecessary movement of the tool in fresh air while machining the component form. Skim distance – An incremental distance above the model at which rapid moves occur from the end of one tool track to the start of the next. The tool rapids across the model clearing the highest point along its route by the Skim value. Plunge distance – An incremental distance above the local component surface where a downward rapid movement of a tool changes to plunge rate.
Powermill paths sourbh powermill lead links tool

Tutorials:-Working with Power MILL "PART V" Toolpath Leads and Links

Sourbh
in Design & CAD
1 1 Intermediate
Links To provide for more efficient movement of the tool across the component the link moves that connect adjacent tool tracks can be defined in several different ways. Short/Long Threshold - This defines the distance limit up to which the Short - Links apply. Any move from the end of a tool track to the start of the next, which exceeds this distance is defined as a Long - Link move. For Short links the available options include Safe Z, Incremental, Skim, On Surface, Stepdown, Straight, and Circular Arc. For Long links the available options include Safe Z, Incremental, and Skim. Safe links apply only at the start and end of a toolpath the available options being Safe Z, Incremental, and Skim. For applications where a machine control system will permit arc fitting of rapid moves the Arc Fit Rapid Moves box can be ticked along with a suitable Radius based on the active tool diameter TDU (Of particular benefit to High Speed Machining). •Activate the toolpath 1_1 created earlier in the Leads section. •Set the Leads In and Out to None, if not already set. Press Apply.
Powermill paths sourbh powermill lead links tool

How to Get More Eyes on Your Design

KeyShot
in Design & CAD
0 0 Intermediate
One way we find what people are creating with KeyShot is by performing a search for the software. Searching for the word 'keyshot' will show the content where people used 'keyshot' in the description or as a tag. If you want more eyes on your design, make sure to fill out the description and enter tags. List the software used in the description or tag, as many people search for these terms to see where how the software is being used and many software companies search to share those models and images with others. https://grabcad.com/library/tag/keyshot
Rendering keyshot 3d-rendering

35Tutorials'''' KeyShot tips(Step By Step)"''

Yannick Herinckx
in Design & CAD
0 0 Intermediate
render using keyshot
Rendering

Syed ammal Engineering College Design Blender

vijay
in Modeling
0 0 Intermediate
Syed Ammal Engineering College at Ramanathapuram, a self-financing institution, is one of several educational institutions founded by Dr. E. M. Abdullah. The college is situated in Dr. E. M. Abdullah Campus, about 7 km from Ramanathapuram, towards Madurai, in Tamil Nadu, India.
BlenderCAD blender design building
White Stratasys Logo White GrabCAD Logo
© 2025 Stratasys Inc.
ABOUT US
RESOURCES
Support
SOCIAL
Streamline Pro
Control
Print
Pro
Shop
PARTNERS
COMMUNITY
Contact Us Website Terms of Use Software Terms of Use Privacy policy Trademarks Your Data on GrabCAD
The Computer-Aided Design ("CAD") files and all associated content posted to this website are created, uploaded, managed and owned by third-party users. Each CAD and any associated text, image or data is in no way sponsored by or affiliated with any company, organization or real-world item, product, or good it may purport to portray.