Tutorials

how to perform analysis test on ansys software

12 1 Intermediate
This is modal analysis of impeller step

Onshape Tutorial Exersice

11 0 Intermediate
Sometimes you will not have Solidworks or a similar program installed on your computer. And you may have to make a model immediately. In such situations, Onshape is great. The link to the modeling file from the sample technical drawing is given below. https://cad.onshape.com/documents/51b10db64d8c10d69e04f4da/w/b4cd4b090cea13100d679675/e/741f8ec43a660ff55252cd29

Tutorial on Modeling and Simulation of standard gear

6 1 Intermediate
Tutorial on Modeling and Simulation of standard gear...

Tutorial: How to add exploded view in drawing?

5 0 Intermediate
How to add exploded view in drawing?

volleyball in Onshape

4 0 Intermediate
I wanted to get to know Onshape better and had a look at the split, transform and pattern command. I repeated this in SolidWorks and it is the same workflow.

Convert STEP/IGES files to STL on Mac

3 1 Intermediate
We’ve added a translator on Workbench that allows users to download a CAD file in STEP, IGES and STL formats, regardless of the format it was uploaded in. This makes it easy to share models with partners who don’t use the same CAD system you do. With just one click your supplier can download any of the neutral formats based on the original file you uploaded.

Tutorial: How to change the units from inch to mm in CREO?

2 0 Intermediate
ja sam u Creo Parametric 2.0 menjao ovako.. C:\Program Files\PTC\Creo 2.0\Common Files\M070\creo_standards\zatim pokrenuo configure i odabrao 5 (vidi sliku)

Use Ansys SpaceClaim to Model Twisted Pair Wire

2 0 Intermediate
Before I know how to do it, I cannot get any useful tips while I googling, it seems very hard. But it is very easy now. This tutorial will help you to model a simple twisted pair wire, for detailed twisted pair wire you can explore it by yourself. A model which modeled by this tutorial is in this linked page: https://grabcad.com/library/w-1930-1575-twisted-pair-wire-1.

S-shaped battery cooling geometry in ANSYS

0 0 Intermediate
Creating an S-shaped cooling geometry in ANSYS or any other simulation software requires a good understanding of fluid dynamics, heat transfer, and simulation tools. It may also involve several iterations to achieve the desired battery system cooling performance.

Anyone have "complex" Loft examples?

0 0 Intermediate
Thanks Tajusyed. Here is one I tried and it worked!

Maximum rotating angle of universal joint

0 0 Intermediate
refer this http://www.sdp-si.com/D757/couplings3.htm