How to Create Profile with Sweep Cut for the BOTTLE 1 Liter

3 0 Intermediate
Create a profile on the surface of the bottle using the Sweep Cut command. On shoulder and body. And the grip at the bottom of the bottle. This is the 1-liter capacity

Solidworks Tutorial #94 How to Draw a Pet Robot Design in Solidworks by Solidworks Easy Design

1 0 Intermediate
We Provide SolidWorks, Auto-CAD,(Mechanical Drawing 3D Design,Catia V5......etc Software Free Tutorials. You can subscribe our channel to get more information. I'm always upload easy way drawing not hard. And unique trick friends. So please Subscribe & Share every Friends.

2 Cavity Blow Mold

1 0 Intermediate
This blow mold consists of two cavities, The distance between the cavities is 80 mm. This video is the part one. Next I will make the bottom, neck, and cooling. Thanks the viewers who asked for this video tutorial on the two cavity blow mold. Hope it is use full.

PET Bottle 1000ml with Diamond Model

1 0 Beginner
PET Bottle 1000ml with Diamond Model, we can learn for five step: 1. Create revolved boss 2. Extruded cut with polygon sketch profile for three position 3. Fillet command 4. Swept cut for bottom of bottle 5. Thread for neck Number 1-4, can you learn in this tutorial. Than number 5, can you see at https://grabcad.com/tutorials/draw-cosmetic-bottle-in-solidworks

PET BOTTLE for Cooking Oil

0 1 Intermediate
PET BOTTLE for Cooking Oil quantity 600ml there are: - Diamond model on shoulder - Thread three side - Groove on body - and Grip at the bottom Use the main command as: - Sweep Boss - Revolved Boss - Extruded Cut - Revolved Cut - Sweep Cut - Circular Pattern - Linear Pattern

Create the Unique BIG COLA Bottle

0 0 Beginner
Hi guys, I hope you like to watch this video tutorial. Create the unique big cola bottle 3.1L. In this tutorial, you will learn about: - Revolved Boss - Helix command for Thread bottle - Swept Boss command for bottom bottle - Circular Pattern command Thank you #SolidworksTutorial #BigColaBottle