Tutorials

  • Design & CAD ×
  • Modeling ×
  • Standards ×
  • BricsCAD ×
  • Onshape ×
  • Powermill ×

Tutorials:-Working with Power MILL "PART III" 3D Area Clearance.

Sourbh
in Design & CAD
2 0 Beginner
next here
Powermill engineering mill 3d area power cam educational tutorials clearance sourbh

Exercise 1

Tigin Thomas Geevarghese
in Design & CAD
2 1 Beginner
Exercise videos in Onshape.
Onshape cad assembly onshape design

Exercise 2

Tigin Thomas Geevarghese
in Design & CAD
2 1 Beginner
Beginner's exercise video in Onshape.
Onshape assembly design cad onshape

Old Fashioned style staircase

2e2bc4ca
in Modeling
1 0 Intermediate
Learn BricsCAD with practical examples. This week, learn how to use advanced modeling techniques to make a set of stairs in CAD. Commands covered: DIV(DIVIDE) AR(ARRAY)/Path AR(ARRAY)/Polar SWEEP REV(REVOLVE) EXT(EXTRUDE)/Both sides 3P(3DPOLY) IAT(IMAGEATTACH)
BricsCAD divide sweep revolve array techniques modeling staircase stairs

How to change measurement units in Onshape?

Yash Bhaskar
in Modeling
1 0 Beginner
Video tutorial to learn how to change units in Onshape.
Onshape units onshape

Onshape Tutorial for Absolute Beginners

Engineering Juice
in Modeling
1 2 Beginner
https://youtu.be/2utLjjkXpIg
Onshape onshape tutorial

problem : powermill changes the orientation of files imoprted in igs format from solidworks

Sourbh
in Design & CAD
1 0 Intermediate
Don't worry about the orientation just simply rotate it through your mouse. and If you are thinking of wrong axis direction than just follow these steps:-
Powermill solidworks powermill

Tutorials:-Working with Power MILL "PART V" Toolpath Leads and Links

Sourbh
in Design & CAD
1 0 Intermediate
Hello Friends, This tutorial continues for power mill Guidance.
Powermill paths sourbh powermill lead links tool

Tutorials:-Working with Power MILL "PART V" Toolpath Leads and Links

Sourbh
in Design & CAD
1 0 Intermediate
Z Heights Skim and Plunge distance provide variable control of rapid move heights within a component. These operate in conjunction with Safe Z and Start Z to minimize slow and unnecessary movement of the tool in fresh air while machining the component form. Skim distance – An incremental distance above the model at which rapid moves occur from the end of one tool track to the start of the next. The tool rapids across the model clearing the highest point along its route by the Skim value. Plunge distance – An incremental distance above the local component surface where a downward rapid movement of a tool changes to plunge rate.
Powermill paths sourbh powermill lead links tool

Tutorials:-Working with Power MILL "PART V" Toolpath Leads and Links

Sourbh
in Design & CAD
1 1 Intermediate
Links To provide for more efficient movement of the tool across the component the link moves that connect adjacent tool tracks can be defined in several different ways. Short/Long Threshold - This defines the distance limit up to which the Short - Links apply. Any move from the end of a tool track to the start of the next, which exceeds this distance is defined as a Long - Link move. For Short links the available options include Safe Z, Incremental, Skim, On Surface, Stepdown, Straight, and Circular Arc. For Long links the available options include Safe Z, Incremental, and Skim. Safe links apply only at the start and end of a toolpath the available options being Safe Z, Incremental, and Skim. For applications where a machine control system will permit arc fitting of rapid moves the Arc Fit Rapid Moves box can be ticked along with a suitable Radius based on the active tool diameter TDU (Of particular benefit to High Speed Machining). •Activate the toolpath 1_1 created earlier in the Leads section. •Set the Leads In and Out to None, if not already set. Press Apply.
Powermill paths sourbh powermill lead links tool

Wheatley core

Lee Wells
in Modeling
2 0 Beginner
a tutorial on how i made a personality core
Onshape steam valve game robot core portal

Belt Roller Assembly

Tigin Thomas Geevarghese
in Design & CAD
1 1 Beginner
A belt roller assembly in Onshape for beginners.
Onshape cad design onshape assembly

Onshape Tutorial for Beginners

Engineering Juice
in Modeling
1 1 Beginner
https://youtu.be/RyS3Bx0X29A
Onshape onshape basics onshape beginner tutorial onshape solid modeling onshape modeling tutorial onshape tutorial onshape tutorial beginners

What is Drawing Intent Recognition option in Bricscad?

Vaidas Guogis
in Design & CAD
0 0 Beginner
Bricscad Platinum provides the ability to edit non-parametric geometry without the need to understand the design history of the geometry. This allows to preserve the correct relationships between selected geometry (e.g., tangency, concentricity, ...) and makes the editing process less time and labor intensive. Design Intent option can be switched on/off and also different recognition options combined at your choice.
BricsCAD drawing option intent recognition

How to sweep object in Bricscad?

Vaidas Guogis
in Design & CAD
0 0 Beginner
It is easy to sweep object using XSWEEP command in Bricscad Platinum.
BricsCAD bricscad sweep object
White Stratasys Logo White GrabCAD Logo
© 2024 Stratasys Inc.
ABOUT US
RESOURCES
SOCIAL
Streamline Pro
Control
Print
Shop
PARTNERS
COMMUNITY
Contact Us Website Terms of Use Software Terms of Use Privacy policy Trademarks Your Data on GrabCAD
The Computer-Aided Design ("CAD") files and all associated content posted to this website are created, uploaded, managed and owned by third-party users. Each CAD and any associated text, image or data is in no way sponsored by or affiliated with any company, organization or real-world item, product, or good it may purport to portray.