Tutorials

  • Design & CAD ×
  • Engineering Fundamentals ×
  • Theory ×
  • Autodesk 123D ×
  • Delmia ×
  • SpaceClaim ×
  • STEP / IGES ×
  • T-Flex CAD ×

SpaceClaim basic tutorial - spring

Verislav Mudrak
in Design & CAD
9 0 Beginner
How to make spring in SpaceClame
SpaceClaim tutorial basic spaceclaim

Tutorial: How to quickly add motion dynamics to any CAD model in SpaceClaim

Oskar Q
in Design & CAD
5 0 Beginner
Tutorial below
SpaceClaim tipsntricks

T-FLEX CAD 17 - Изучение системы

T-FLEX CAD ST
in Design & CAD
3 1 Beginner
Обучающие пособие включает в себя 5 видео, которые продемонстрируют Вам работу с интерфейсом системы T-FLEX CAD 17. Скачать бесплатную учебную версию T-FLEX CAD 17: https://tflexcad.ru/download/t-flex-cad-free/
T-Flex CAD cad t-flex

IMPROVEMENT OF THE TRAINING COURSE OF 3D MODELING AND PROTOTYPTING

Sergey Strygin
in Modeling
2 2 Expert
The monograph discusses the features of the use of additive technologies in the scientific-educational process of the University. Areas of application of 3D modeling and prototyping related to training students. The training course is based on examples of virtual modeling and design toys aimed at the development of scientific and technical creativity of children, educational models, and also finished products and their components, including logos, emblems.
T-Flex CAD logos models educational toys creative technology additive

SpaceClaim basic tutorial - variable spring

Verislav Mudrak
in Design & CAD
2 0 Beginner
SpaceClame basic tutorial - how to make variable spring
SpaceClaim spring variable tutorial basic spaceclaim

Top 5 CAD file formats to use!

Kevin Eidsmore
in Design & CAD
2 0 Beginner
Link to YouTube video I made about the 5 best CAD file types to use.
STEP / IGES files recommended best types formats file cad

T-FLEX CAD 17 Basics

T-FLEX CAD ST
in Modeling
2 0 Beginner
The tutorial includes 5 videos that will show you how to work with the interface of the T-FLEX 17 CAD system. Download the free training version of T-FLEX CAD 17: https://www.tflex.com/resources/tflexcadst/
T-Flex CAD interface basics cad t-flex tflex

tutorial- How to make a rotor blower (the answer to the request) in T-Flex CAD Parametric 2D/3D

Tomek F.
in Design & CAD
2 0 Intermediate
Thank you I hope that I helped
T-Flex CAD

3D Modeling of a Braitenberg Vehicle in 4 Steps using Autodesk 123D Design

Yoana Ivanova
in Modeling
2 0 Intermediate
This tutorial is suitable for designers who have a basic knowledge of using the open source product Autodesk 123D Design. The steps to build a Breitenberg vehicle are as follows: 1. Modeling a wheel: a cylinder with a diameter of 2 cm and a height of 0.5 cm is placed in the workspace. Drill a hole in it by drawing a circle with a diameter of 0.3 cm and extruding - 0.5 cm with the Extrude tool. We soften the edges of the cylinder with Fillet Radius: 0.5. 2. Clone the wheel: rotate the resulting wheel 90° along the Z axis and copy it with Ctrl+C and Ctrl+V. 3. Modeling the vehicle body: regarding the design of the vehicle body, there are various options. In this case the author models a classic vehicle, which is most often shown in the bibliographic sources. After drawing and extruding a surface with the desired shape we apply Fillet with radius 35 on the back edge and with 30 on the front edge for a contemporary design (i could provide more images if it is needed). On the selected side edges we successively apply Fillet with a radius of 9. 4. Make a special place for the sensor: it is necessary to select the square plane that is located in the middle of the case and successively apply Sketch > Project, Sketch > Offset and Construct > Extrude with a negative value.
Autodesk 123D breitenberg vehicle

T-FLEX CAD 17 - 3D Профили и Опорная геометрия

T-FLEX CAD ST
in Modeling
2 1 Beginner
Ролик демонстрирует работу с опорной геометрией - 3D Профилями, описывает их классификацию, типы параметризации, методы создания. Рассмотрены другие типы 3D элементов - рабочие плоскости, поверхности, 3D пути, 3D узлы и прочее.
T-Flex CAD geometry reference t-flex profile 3d cad

T-FLEX CAD 16. 3D model of the flange. Primitive

Victor Stasevsky
in Modeling
2 0 Beginner
Commands that unite the Primitive group allow you to create basic geometric bodies: Parallelepiped, Cylinder, Cone, Ball, Torus, Prism and Pyramid without creating additional construction elements. Source: https: //www.tflexcad.ru/help/cad/15/index.html? Primitive.htm Link to the lesson: 1
T-Flex CAD sv t-flexcad

SpaceClaim basic tutorial - taper spring

Verislav Mudrak
in Design & CAD
2 0 Beginner
SpaceClame basic tutorial - how to make taper spring
SpaceClaim tutorial basic spaceclaim

Создание ролика в T-FLEX CAD 17

T-FLEX CAD ST
in Modeling
2 0 Beginner
В ходе урока вы познакомитесь с основными методами и принципами работы в T-FLEX CAD 17 на практическом примере.
T-Flex CAD roller example 3d cad t-flex

Use Ansys SpaceClaim to Model Twisted Pair Wire

Fineman
in Modeling
1 0 Intermediate
Before I know how to do it, I cannot get any useful tips while I googling, it seems very hard. But it is very easy now. This tutorial will help you to model a simple twisted pair wire, for detailed twisted pair wire you can explore it by yourself. A model which modeled by this tutorial is in this linked page: https://grabcad.com/library/w-1930-1575-twisted-pair-wire-1.
SpaceClaim wire pair twisted spaceclaim
White Stratasys Logo White GrabCAD Logo
© 2024 Stratasys Inc.
ABOUT US
RESOURCES
SOCIAL
Streamline Pro
Control
Print
Shop
PARTNERS
COMMUNITY
Contact Us Website Terms of Use Software Terms of Use Privacy policy Trademarks Your Data on GrabCAD
The Computer-Aided Design ("CAD") files and all associated content posted to this website are created, uploaded, managed and owned by third-party users. Each CAD and any associated text, image or data is in no way sponsored by or affiliated with any company, organization or real-world item, product, or good it may purport to portray.