Tutorials

  • Design & CAD ×
  • Kinematics ×
  • JT ×
  • SketchUp ×
  • GrabCAD Print ×

tutorial : how to open solidworks files in sketchup

Amine Mech
in Design & CAD
8 4 Intermediate
open solidworks files in sketchup
SketchUp solidworks sketchup files tutorial open how

How to FDM Print for Part Sliding Clearance

GrabCAD Tutorials
in Assemblies
13 4 Intermediate
If you are 3D printing parts that have to fit/slide together after printing, you will need to put some sort of clearance between those parts in your CAD system. A good starting place is a clearance 2x the layer height you are going to print at, but you should make a few smaller test prints at different clearances to see if the 2x layer height rule holds for your particular situation and orientation. Have fun and happy printing!
GrabCAD Print sliding clearance printing 3d fdm

Stacking Your Parts in Z for FDM

Stratasys
in Assemblies
2 0 Intermediate
Have long thin flat parts you’ve always wanted to print right on top of each other in FDM but the slicer never allowed you to? Learn how to use this exclusive new feature in GrabCAD Print Pro!
GrabCAD Print fdm stacking stratasys 3d printing software grabcad print pro

diverse shape translation to JT or STP

juergen grewe
in Translations
9 2 Intermediate
Have found a way to import / translate easy shape files like 3ds, wrl, skp, stl, ifc and so on into JT or STP. The shape files can have texture or not. My interest was how to get the shape files with texture translated to JT. For this, I use PCon Planner and save as 3DS. After this, import it into MeshLab (single texture file / no layer) and save it as WRL (VRML 2). This is than easy to import into Teamcenter Livecyle Visualisation (TCVis) and save as JT. If you like to have more imported WRL/JT files into TCvis (JT2Go) please rename the texture or the view results in TCVis (JT2Go) are bad, looks like unplaced textures. If you like to export files with not a texture another way is to use. The fast one with no colours is to save as stl and import it into your volume modeller. The longer way is here to import it into PCon after this save as Skp (Sketchup) and now is to use Automapki (~40 $ or € / year sorry no freeware I have found) and save as STP file. The result you can now import into a volume modeller and use it there or (and) save it as JT and many other files too. Hope you like this tutorial a bit. If you have any questions please let me know.
JT jt2go tcvis edge solid paint 3d mashlab pconplanner automapki sketchup

(VIDEO) Export SolidWorks File to Sketchup (English)

Infinity Projetos Brasil
in Drafting
4 0 Intermediate
================= ================= DO NOT CLICK HERE: http://bit.ly/projetos_infinity ================= ================= Export SolidWorks File to Sketchup (English) Exporting and Importing from Solidworks to Sketchup In this tutorial I explain how to export from sketchup to solidworks, and give tips on how to use solidworks power surfacing tools, and teach you how to paint stl files. join our youtube community: https://www.youtube.com/channel/UCF2k47g7uAo0lM-kA13V6jQ?sub_confirmation=1 see how I exported this sketchup human to solidworks https://www.youtube.com/watch?v=tPsQDriOrIA Here's how to take a solidworks whatsapp course with me: https://www.youtube.com/watch?v=RQgoTn96wAw&t=174s
SketchUp file how import export sketchup solidworks

How to make tangent cuts to a curved solid

Patrick
in Design & CAD
4 0 Intermediate
Hi ! If only rendering is necessary , basic SW material such as perforated rubber can make the job. Arrange color, resize map scale and it will be done.
SketchUp surface cut tangent

How to make tangent cuts to a curved solid

Fahad Rafi
in Design & CAD
1 0 Intermediate
easy :) ask questions where stuck.
SketchUp surface cut tangent

JP_005_GrabCAD Print: 部品摺動部の隙間をＦＤＭ造形する方法

Stratasys Japan
in Assemblies
0 0 Intermediate
造形後にはめ合わせるまたは摺動（スライド）させる必要がある部品を3D造形する場合、CADシステムで該当する部品の間にある程度の隙間を設ける必要があります。目安として、造形する際の積層ピッチの2倍の隙間から始めるとよいでしょう。ただし、小さいサイズで何度かテスト造形を行い、積層ピッチの2倍の法則が特定の状況や向きに当てはまるかを確認することをお勧めします。それでは3Dプリンタで楽しくモノづくりをしていきましょう！
GrabCAD Print fdm 3d printing clearance sliding

How to smooth sides

Andrew Boden
in Modeling
2 0 Intermediate
This will teach you how to smoothen the sides of a shape.
SketchUp

SketchUp Tutorials for Interior design - 10 Rectangle tool

Gyanjeet Raj
in Modeling
1 0 Intermediate
SketchUp Tutorials for Interior design Please click on link for watch video - https://youtu.be/QXC4eZVqIR4
SketchUp raj gyanjeet design interior sketchup

SketchUp Tutorials for Interior design - 11 Rotated rectangle tool

Gyanjeet Raj
in Modeling
0 0 Intermediate
SketchUp Tutorials for Interior design Please Click on link for watch video. https://youtu.be/aa52U5VsqWc
SketchUp design interior sketchup

MODELING BOAT IN SKETCHUP PART 3

Allan Enerva
in Modeling
1 0 Intermediate
https://www.youtube.com/watch?v=zm8aevdpPN4&t=91s
SketchUp

modeling boat in SketchUp part 2

Allan Enerva
in Modeling
0 0 Intermediate
https://www.youtube.com/watch?v=9rz9Yd6l2iE
SketchUp
White Stratasys Logo White GrabCAD Logo
© 2024 Stratasys Inc.
ABOUT US
RESOURCES
SOCIAL
Streamline Pro
Control
Print
Shop
PARTNERS
COMMUNITY
Contact Us Website Terms of Use Software Terms of Use Privacy policy Trademarks Your Data on GrabCAD
The Computer-Aided Design ("CAD") files and all associated content posted to this website are created, uploaded, managed and owned by third-party users. Each CAD and any associated text, image or data is in no way sponsored by or affiliated with any company, organization or real-world item, product, or good it may purport to portray.