Tutorials

  • Design & CAD ×
  • Composites ×
  • Measurement / Inspection ×
  • AutoCAD ×
  • Fusion 360 ×
  • Lagoa ×
  • Powershape ×
  • ViaCAD 3D ×

How to design Complete Drone Overview

Rugved Chavan
in Modeling
83 7 Intermediate
Complete Drone design with 1. raspberry pi 4 extension 2. pixhawk 3. landing gears 4. drone frame 5. telemetry module 6. gps module with stand 7. Battery 3300 mAh 8. antivibrator 9. Brushless Motor (BR4114) Please give it a like.
Fusion 360 fusion360 telemetry raspberrypi drone

DXF to G-CODE

Ali Nasser
in Modeling
8 7 Expert
Convert DXF to G-CODE How to convert Dxf to G-code ? تحوييل ملف DXF الى G code DXF NC code G Code Router للاشترك بقناة اليوتيوب بالرابط ده : http://bit.ly/2srTfzm
AutoCAD router code nc dxf

How to create a block in AutoCAD?

Karajko CAD
in Drafting
18 5 Beginner
In my first tutorial on GrabCAD I will show you how to create Blocks in AutoCAD. It is nothing complicated so lets start.
AutoCAD blocks autocad

Basic Command List AutoCAD

Mohit
in Design & CAD
4 5 Beginner
Basic Command List AutoCAD
AutoCAD autocad command beginner

Modelagem de funil (Português)

Mayara Gualberto
in Modeling
16 4 Beginner
Software: Fusion 360. Peça: Funil. Origem: SolidWorks Premiun 2009, pág. 197.
Fusion 360 portugues fusion360

How to import the model to Fusion 360?

bot bu1ld3r
in Design & CAD
5 4 Intermediate
I have successfully imported the following files: .STEP / .stp / .ipt / .sat / .iam but neither of the two you mentioned. Upload the file from the Data Panel. After upload, it should show up as a thumbnail, right click on it & then 'open'. Parametric mode will be disabled but there's a workaround on youtube (https://youtu.be/H-N1LZufT_o). Good luck.
Fusion 360 import models fusion 360 rhino sketchup

How to draw tangent arcs between two circles in AutoCAD?

Karajko CAD
in Drafting
22 4 Beginner
In this tutorial I am going to show you the easiest way to draw arc between two circles when you need specific radius.
AutoCAD drafting radius arcs autocad

HONEY BOTTLE

SYED SHOAIB
in Modeling
1 4 Beginner
NEED THIS DESIGN
AutoCAD honey jar honey bottle

Activate Orbit/Rotate feature via Mouse in Fusion 360

Logan
in Modeling
9 4 Beginner
The default Fusion 360 has "PAN" option when you click the middle button of the mouse. If you want to rotate you have to go and select the "ORBIT" icon at the bottom of the screen. This kind of interface makes it somewhat difficult to execute as one has to frequently rotate the model to get an overview of the model being constructed. Solidworks users may find it even more difficult to use it. This tutorial explains how to activate orbit function in mouse.
Fusion 360 click mouse resolve orbit pan

3D printable metric screw thread

Simon Schellevis
in Modeling
2 4 Beginner
The screw thread in F360 cannot be printed with a 3D printer. This instruction provides a method for creating 3D printable screw threads.
Fusion 360

Construction of a Dodecahedron

Stéphane Gazel
in Modeling
22 4 Intermediate
Some CAD software such as AutoCAD does not have all the geometric objects, in particular the famous Dodecahedron. A method simple drawdown in descriptive geometry.
AutoCAD dodecahedron descriptive geometry

How to design bolts in AutoCAD?

22255d73
in Modeling
1 3 Intermediate
Bolt design has been introduced in AUTOCAD 2010 program as a result of some operations as seen below.
AutoCAD bolt autocad

Robotic Tank Tread Assembly- Fusion 360 Tutorial (Tracked Robot Part 2)

Engineering Juice
in Assemblies
10 3 Beginner
#Fusion360 #Fusion360Tutorial #AutodeskFusion360 Buy this chain: https://amzn.to/3f2FZEl In this series, we will design and develop a tracked, tank-like mobile robot optimized for use on sand and in desert environments. The modeling of the treads, custom sprocket, idler rollers and 3D printed suspension system will be shown in great detail. We will first create the chain links themselves and the tread pieces, then pattern them along the shape of the loop. Once we finish this, we will create the custom sprocket and motor connection followed by the idler spindle and finally the suspension system. In the end, we can mirror our entire assembly to the other side to create the right side tread. Working on only one side at a time makes it easier on our computers and allows us to work faster with less lag-time.
Fusion 360 robotics tutorial 360 fusion

Difference in introducing fillet in 2D and 3D medium

Logan
in Modeling
3 3 Beginner
This tutorial highlights the difference in introducing fillets during a sketch (2D) and after an extrude command (3D).
Fusion 360 extrude taper fillet

Cessna 182 Skylane Design-using Autodesk Fusion 360

leo zeng
in Design & CAD
9 3 Intermediate
In this video, I am going to make the Cessna 182 Skylane aircraft, I used a blueprint to trace it, I made it with solid. Not even one form!!!
Fusion 360 machine design plane cad aircraft
White Stratasys Logo White GrabCAD Logo
© 2024 Stratasys Inc.
ABOUT US
RESOURCES
SOCIAL
Streamline Pro
Control
Print
Shop
PARTNERS
COMMUNITY
Contact Us Website Terms of Use Software Terms of Use Privacy policy Trademarks Your Data on GrabCAD
The Computer-Aided Design ("CAD") files and all associated content posted to this website are created, uploaded, managed and owned by third-party users. Each CAD and any associated text, image or data is in no way sponsored by or affiliated with any company, organization or real-world item, product, or good it may purport to portray.