Tutorials

  • Design & CAD ×
  • Modeling ×
  • Drafting ×
  • FEM ×
  • Process ×
  • Autodesk 123D ×
  • IronCAD ×
  • T-Flex CAD ×
  • GrabCAD Workbench ×
  • Text file ×

How to convert CAD files in Workbench

Sar Dar
in Design & CAD
131 49 Beginner
How to convert file formats, such as sldprt and sldasm files, to STEP, IGES, STL, Parasolid (.x_t), ACIS (.sat), JT, or VRML (.wrl)
GrabCAD Workbench sldprt vrml jt acis parasolid stl iges step

How do i track changes by others?

Sara Sigel
in Design & CAD
5 1 Intermediate
Your partner can upload a new version, leave a sketch, or write a comment to let you know about a change. If you have notifications setup, then you'll get an email when any of these happen. https://grabcad.com/email/edit You can also compare changes between versions, which is very useful. For a visual comparison of what is different from one version to the next, see the steps, below.
GrabCAD Workbench file grabcad cad workbench management version revision

how to draw campbell diagram in ansys pls hlp me

harikrushna dodiya
in Design & CAD
3 0 Intermediate
campbell diagram step start from 9 plz see step 9
GrabCAD Workbench

IronCAD - Top 10 Tips

Nick
in Modeling
3 5 Expert
Ten top tips for IronCAD
IronCAD hints tips ironcad

T-FLEX CAD 17 - Изучение системы

T-FLEX CAD ST
in Design & CAD
3 1 Beginner
Обучающие пособие включает в себя 5 видео, которые продемонстрируют Вам работу с интерфейсом системы T-FLEX CAD 17. Скачать бесплатную учебную версию T-FLEX CAD 17: https://tflexcad.ru/download/t-flex-cad-free/
T-Flex CAD cad t-flex

IMPROVEMENT OF THE TRAINING COURSE OF 3D MODELING AND PROTOTYPTING

Sergey Strygin
in Modeling
2 2 Expert
The monograph discusses the features of the use of additive technologies in the scientific-educational process of the University. Areas of application of 3D modeling and prototyping related to training students. The training course is based on examples of virtual modeling and design toys aimed at the development of scientific and technical creativity of children, educational models, and also finished products and their components, including logos, emblems.
T-Flex CAD logos models educational toys creative technology additive

T-FLEX CAD 17 Basics

T-FLEX CAD ST
in Modeling
2 0 Beginner
The tutorial includes 5 videos that will show you how to work with the interface of the T-FLEX 17 CAD system. Download the free training version of T-FLEX CAD 17: https://www.tflex.com/resources/tflexcadst/
T-Flex CAD interface basics cad t-flex tflex

How can I change picture order after uploading a model ?

shubham gupta
in Design & CAD
2 3 Intermediate
Please go through this tutorial.
GrabCAD Workbench order image gif

IronCAD - Using the Co-ordinate system to create a section

Nick
in Modeling
2 0 Intermediate
Use the Co-Ordinate systems to create a section plane. This is a handy alternative the section tool, as it does not cut the solid model.
IronCAD section cross

tutorial- How to make a rotor blower (the answer to the request) in T-Flex CAD Parametric 2D/3D

Tomek F.
in Design & CAD
2 0 Intermediate
Thank you I hope that I helped
T-Flex CAD

3D Modeling of a Braitenberg Vehicle in 4 Steps using Autodesk 123D Design

Yoana Ivanova
in Modeling
2 0 Intermediate
This tutorial is suitable for designers who have a basic knowledge of using the open source product Autodesk 123D Design. The steps to build a Breitenberg vehicle are as follows: 1. Modeling a wheel: a cylinder with a diameter of 2 cm and a height of 0.5 cm is placed in the workspace. Drill a hole in it by drawing a circle with a diameter of 0.3 cm and extruding - 0.5 cm with the Extrude tool. We soften the edges of the cylinder with Fillet Radius: 0.5. 2. Clone the wheel: rotate the resulting wheel 90° along the Z axis and copy it with Ctrl+C and Ctrl+V. 3. Modeling the vehicle body: regarding the design of the vehicle body, there are various options. In this case the author models a classic vehicle, which is most often shown in the bibliographic sources. After drawing and extruding a surface with the desired shape we apply Fillet with radius 35 on the back edge and with 30 on the front edge for a contemporary design (i could provide more images if it is needed). On the selected side edges we successively apply Fillet with a radius of 9. 4. Make a special place for the sensor: it is necessary to select the square plane that is located in the middle of the case and successively apply Sketch > Project, Sketch > Offset and Construct > Extrude with a negative value.
Autodesk 123D breitenberg vehicle

T-FLEX CAD 17 - 3D Профили и Опорная геометрия

T-FLEX CAD ST
in Modeling
2 1 Beginner
Ролик демонстрирует работу с опорной геометрией - 3D Профилями, описывает их классификацию, типы параметризации, методы создания. Рассмотрены другие типы 3D элементов - рабочие плоскости, поверхности, 3D пути, 3D узлы и прочее.
T-Flex CAD geometry reference t-flex profile 3d cad

T-FLEX CAD 16. 3D model of the flange. Primitive

Victor Stasevsky
in Modeling
2 0 Beginner
Commands that unite the Primitive group allow you to create basic geometric bodies: Parallelepiped, Cylinder, Cone, Ball, Torus, Prism and Pyramid without creating additional construction elements. Source: https: //www.tflexcad.ru/help/cad/15/index.html? Primitive.htm Link to the lesson: 1
T-Flex CAD sv t-flexcad

Создание ролика в T-FLEX CAD 17

T-FLEX CAD ST
in Modeling
2 0 Beginner
В ходе урока вы познакомитесь с основными методами и принципами работы в T-FLEX CAD 17 на практическом примере.
T-Flex CAD roller example 3d cad t-flex

How to upload files to GrabCAD Workbench?

Stephen Nyberg
in Design & CAD
1 1 Beginner
Here is how I created a new Workbench project and a few different ways I uploaded SolidWorks files. This is was also my first time using the upload folders option so I came across a few bugs that I am sure will be worked out but they are not a big deal. Please feel free to leave comments if this worked for you or if you have a different or better way to do it. I will tell you how to start your Workbench project and upload SolidWorks files. I am assuming you know how to create your files. For this tutorial, I will upload a .zip file containing all of the part and assembly files. You can make this many ways but one of the best ways is to use the Pack-and-Go option in SW. Many other CAD programs have a similar option and this makes sure all the required files are included.
GrabCAD Workbench workbench upload
White Stratasys Logo White GrabCAD Logo
© 2024 Stratasys Inc.
ABOUT US
RESOURCES
SOCIAL
Streamline Pro
Control
Print
Shop
PARTNERS
COMMUNITY
Contact Us Website Terms of Use Software Terms of Use Privacy policy Trademarks Your Data on GrabCAD
The Computer-Aided Design ("CAD") files and all associated content posted to this website are created, uploaded, managed and owned by third-party users. Each CAD and any associated text, image or data is in no way sponsored by or affiliated with any company, organization or real-world item, product, or good it may purport to portray.