Tutorials

  • Design & CAD ×
  • Dimensioning / Tolerancing ×
  • Standards ×
  • Autodesk 123D ×
  • OBJ ×
  • PTC Creo Elements ×

Create an OBJ Cube With Your Favorite Images

Anirudh Krishnakumar
in Modeling
17 2 Beginner
Ever wanted to create a CAD file with your favorite pictures? There are many ways to apply images and textures to CAD files. However, for most of these operations, expensive programs or CAD experience might be required. This tutorial shows you how to make a simple OBJ cube, while explaining some of the basic OBJ nomenclature. It then explains the steps to map pictures on the cube's faces. The only tools you will need is a text editor like notepad and your favorite images!
OBJ photo cube cad map texture obj

how to perform analysis test on ansys software

harikrushna dodiya
in Design & CAD
12 1 Intermediate
This is modal analysis of impeller step
PTC Creo Elements

Tutorial on Modeling and Simulation of standard gear

Milan Ilić
in Design & CAD
6 1 Intermediate
Tutorial on Modeling and Simulation of standard gear...
PTC Creo Elements gear standard simulation tutorial engineer pro parametric creo

Creating a Worm Wheel in Creo Parametric 1.0

c0cd00a1
in Design & CAD
5 0 Beginner
Here's the answer for it..
PTC Creo Elements creo parametric 1-0

Tutorial: How to add exploded view in drawing?

Milan Ilić
in Design & CAD
5 0 Intermediate
How to add exploded view in drawing?
PTC Creo Elements drawing exploded view creo pro-e

How to change from inch im mm in creo 2.0?

anhquoc38
in Design & CAD
5 0 Beginner
tutorial: see the img.
PTC Creo Elements inch cad creo unit change millimeter

Sweep with multiple sections

Sumit Luthra
in Design & CAD
3 0 Beginner
For this we have to use swept blend command.
PTC Creo Elements section sweep pro multiple blend

Tutorial - how to make a spiral sphere

Flaviano Crespi
in Design & CAD
3 0 Beginner
This tutorial was compiled with Creo Elements / Direct Express to implement a model similar to my file: http://grabcad.com/library/spiral-sphere You can download a free fully functional copy of Creo from PTC site: http://www.ptc.com/products/creo-elements-direct/modeling-express/ Creo is completely "history-free" and uses the so-called "explicit modeling".
PTC Creo Elements

Tutorial - Making text emboss on the curved surface in Creo Elements/Pro aka Pro Engineer Wildfire?

Sudhir Gill
in Design & CAD
3 1 Beginner
Here is the tutorial.
PTC Creo Elements solid surface wildfire creo elements text engineer pro tutorial curved bend extrude emboss flatten quilt

Tutorial - Modeling Flower in Creo Element aka Pro/Engineer using Surfacing method 2?

Sudhir Gill
in Design & CAD
2 0 Beginner
Here is the tutorial.
PTC Creo Elements modeling surface wildfire flower engineer pro tutorial method

Tutorial - Modeling rope in Creo Elements aka Pro/E

c0cd00a1
in Design & CAD
2 0 Beginner
Steps for creating a rope in creo parametric 1.0
PTC Creo Elements modeling wildfire creo elements engineer pro tutorial

Tutorial: How to change the units from inch to mm in CREO?

Milan Ilić
in Design & CAD
2 0 Intermediate
ja sam u Creo Parametric 2.0 menjao ovako.. C:\Program Files\PTC\Creo 2.0\Common Files\M070\creo_standards\zatim pokrenuo configure i odabrao 5 (vidi sliku)
PTC Creo Elements inch mm change enginner pro parametric creo units

3D Modeling of a Braitenberg Vehicle in 4 Steps using Autodesk 123D Design

Yoana Ivanova
in Modeling
2 0 Intermediate
This tutorial is suitable for designers who have a basic knowledge of using the open source product Autodesk 123D Design. The steps to build a Breitenberg vehicle are as follows: 1. Modeling a wheel: a cylinder with a diameter of 2 cm and a height of 0.5 cm is placed in the workspace. Drill a hole in it by drawing a circle with a diameter of 0.3 cm and extruding - 0.5 cm with the Extrude tool. We soften the edges of the cylinder with Fillet Radius: 0.5. 2. Clone the wheel: rotate the resulting wheel 90° along the Z axis and copy it with Ctrl+C and Ctrl+V. 3. Modeling the vehicle body: regarding the design of the vehicle body, there are various options. In this case the author models a classic vehicle, which is most often shown in the bibliographic sources. After drawing and extruding a surface with the desired shape we apply Fillet with radius 35 on the back edge and with 30 on the front edge for a contemporary design (i could provide more images if it is needed). On the selected side edges we successively apply Fillet with a radius of 9. 4. Make a special place for the sensor: it is necessary to select the square plane that is located in the middle of the case and successively apply Sketch > Project, Sketch > Offset and Construct > Extrude with a negative value.
Autodesk 123D breitenberg vehicle

Tutorial: Circular Welded Helical Spring

Sumit Luthra
in Design & CAD
2 0 Beginner
Now Here is the solution to this problem.. Download Model: http://grabcad.com/library/circular-helical-spring
PTC Creo Elements spring circular pro-engineer helical sweep welded ends

Tutorial - Modeling rope in Creo Elements aka Pro/E

Sudhir Gill
in Design & CAD
1 0 Beginner
For making simple bended rope we have to follow these steps. 1 Make 4 cylinderical extrusions. 2 Twist them. 3 Bend them.
PTC Creo Elements modeling wildfire creo elements engineer pro tutorial
White Stratasys Logo White GrabCAD Logo
© 2024 Stratasys Inc.
ABOUT US
RESOURCES
SOCIAL
Streamline Pro
Control
Print
Shop
PARTNERS
COMMUNITY
Contact Us Website Terms of Use Software Terms of Use Privacy policy Trademarks Your Data on GrabCAD
The Computer-Aided Design ("CAD") files and all associated content posted to this website are created, uploaded, managed and owned by third-party users. Each CAD and any associated text, image or data is in no way sponsored by or affiliated with any company, organization or real-world item, product, or good it may purport to portray.