Tutorials

  • Design & CAD ×
  • Autodesk Inventor ×
  • CATIA ×
  • Luxology ×

LEGO - 01 Basic Dimensions & Bricks Explained

dk
in Modeling
68 9 Intermediate
I get a lot of questions about how I create LEGO parts. This is Part I - The Basics. Most "standard" parts can be created using only simple math. Standard parts consist of square, circular, and angled blocks - regular geometric blocks. I will refer to BrickLink (www.bricklink.com/), but many others use similar methods: Peeron: http://www.peeron.com/ BrickOwl: http://www.brickowl.com/ Brickipedia: http://lego.wikia.com/wiki/LEGO_Wiki etc.
Autodesk Inventor bricks dimensions lego

how do i hide all planes,constraints in assembly in CATIA ?

Sebastijan Prelec
in Design & CAD
6 4 Intermediate
On menu line select EDIT, than on pop-up menu select SEARCH, than go to the tab ADVANCED. On this tab you choose the right parameters: i.e. planes and axis. Selection of more than one parameter must be done with boolean operator "OR". When the parameters are set, then you click SEARCH and after that you click SELECT. Now all desired features are selected and painted in orange (in assembly and in structure tree). Click HIDE command (pop-up menu "view" or icon on toolbar "view") and that's it.
CATIA

How to convert an assembly into one solid model (single body) IN cATIA?

Anirban Ghosh
in Design & CAD
2 3 Intermediate
Follow these steps
CATIA

How to change origin of view in Catia drafting?

özgür kesebir
in Drafting
8 2 Intermediate
How to change origin of view in Catia drafting? It will show you how to change origin and axis lines in drawing.
CATIA drafting origin v5r19 catia

Parametric Design in CATIA V5

Aria Djavid
in Modeling
13 4 Intermediate
Hi guys, I've just launched a new course on PARAMETRIC DESIGN in CATIA. I know lots of you looking for a complete tutor on this subject for a long time. Here is the link to my course: https://www.udemy.com/catia-v5-parametric-design/ It's comprehensive course with multiple examples so if you are interested just give it a try.
CATIA tutorial v5 catia design parametric

How to create a linked BOM and balloons in a CATIA drawing

Pablo Sánchez
in BOM
9 0 Intermediate
We can do an assembly drawing with a Bill of Material explaining to the manufacturer important info about each part. Also, we can number the parts with balloons, so that it can be easy to find and identify them. It will be explained all the necessary steps in Assembly Design and Drafting module.
CATIA design assembly catia material bill bom balloon drafting

New approach in designing and modelling an Oil pump using Inventor 2016

Ebrahim Abu Has
in Design & CAD
107 13 Intermediate
Step by step tutorial videos, showing the easy way of modelling an Oil pump using Inventor 2016, how to create the parts, assemble them and drive gears, new approach make use of most Inventor specs, design center with some new tips & tricks ...
Autodesk Inventor ticks tips some splines parallel shafts keyways keys shaft design gears spur

How to create NPT (national pipe taper) threads using inventor

engineer
in Modeling
13 3 Intermediate
I have had people ask me on here how I model npt threads for some of the parts I make, so I figured I would put it out there for others to see as well. Note: if you look at the threaded models I have on this website you will see that I have clearly taken more time on some of them than others, this tutorial will teach you how to do it the right and proper way.
Autodesk Inventor threads npt

How do I assign keyboard shortcuts for catia

vinoth
in Design & CAD
4 0 Intermediate
Hi, here i show you how to assign Keyboard Shortcuts. please go through that and let me know if you have any doubt in that.
CATIA

How to create Rack & Pinion using Inventor 2016

Ebrahim Abu Has
in Modeling
12 0 Intermediate
How to create Rack & Pinion with Inventor 2016 and show the motion??? Step by Step tutorial .... follow the link below https://www.youtube.com/playlist?list=PLCrNndUdp-R2RXvptMFVptVGuLDD0NV2f
Autodesk Inventor constrains drive assembly modelling 3d 2016 inventor pinion rack

why circles of small of diameter looks like polygon in catia v5?

Kris
in Design & CAD
11 1 Intermediate
This is a visualization problem. Change the following settings, see images.
CATIA

how can create admin mode of catia ?

özgür kesebir
in Design & CAD
15 7 Intermediate
Here is the tutorial to run catia as admin.
CATIA

How to change 3D file into 2D in Catia V5

Mohd Toukeer
in Drafting
0 0 Intermediate
In catia V5, How to draft a 3D model into Engineering Drawing and give dimensions.
CATIA 2d into file 3d change hw draft how drafting catia

Import Points, Curves, Lofts from Microsoft Excel.

Ananth Narayan
in Modeling
19 2 Intermediate
In this tutorial you will see how to import the points curves using macros in excel. The most easy and efficient method.
CATIA macros catia
White Stratasys Logo White GrabCAD Logo
© 2024 Stratasys Inc.
ABOUT US
RESOURCES
SOCIAL
Streamline Pro
Control
Print
Shop
PARTNERS
COMMUNITY
Contact Us Website Terms of Use Software Terms of Use Privacy policy Trademarks Your Data on GrabCAD
The Computer-Aided Design ("CAD") files and all associated content posted to this website are created, uploaded, managed and owned by third-party users. Each CAD and any associated text, image or data is in no way sponsored by or affiliated with any company, organization or real-world item, product, or good it may purport to portray.