Tutorials

  • Drafting ×
  • Dimensioning / Tolerancing ×
  • Translations ×
  • Other ×
  • BricsCAD ×
  • FreeCAD ×
  • NX Unigraphics ×
  • Powermill ×
  • TinkerCAD ×
  • Other ×

Clamp Design

Anup Chauhan
in Drafting
15 1 Beginner
Clamp Design https://www.instagram.com/p/CqAkr5bKxDZ/
NX Unigraphics assembly modeling drafting drawing clamp siemens nx nx nx cad

(VIDEO) NX CAD Drafting Tutorials

Diyanshu Singh
in Drafting
11 0 Intermediate
Learn basic drafting NXCAD.
NX Unigraphics drawing drafting nxcad

Basic Symbols Used in Engineering Drawings

FredSWUG
in Drafting
10 3 Beginner
Learn about the ways these common features are described in drawings. Counterbore Countersink Spotface Depth Diameter Radius I should also mention that I did not create this course, I just found it online and thought it was pretty well done. https://www.wisc-online.com/learn/career-clusters/stem/eng16204/basic-symbols-used-in-engineering-drawings
Other radius diameter depth spotface countersink counterbore

NX 11: Interpart Expression

Anand Panchal
in Dimensioning / Tolerancing
5 2 Intermediate
Interpart Expression: To create or edit a link to an expression in another part. To apply tolerance and link two dimensions in assembly.
NX Unigraphics dimensioning aseembly inter expression interpart tolerance unigraphics nx

3D Modeling

Anup Chauhan
in Drafting
4 0 Beginner
1. Drafting for 3D Modeling https://www.instagram.com/p/CqZOdbUq2ZS/
NX Unigraphics part model unigraphics siemens nx 3d parts cad modeling 3d design

Metric taper

Carlos Soler
in Drafting
3 0 Beginner
It is a simple description of the ISO 3040 taper ratio and an application to the ISO 5356.
Other angle 5356 iso taper

How do you measure an item in a photo?

Ali Nasser
in Drafting
3 0 Beginner
How do you measure an item in a photo? using imagej English language tutorial https://youtu.be/VcQAnfpNwzw
Other measure in pictures measure in photo measure on picture imagej how do you measure an item in a photo

Universal Joint Design In Nx

Anup Chauhan
in Drafting
4 0 Intermediate
universal joints parts and assembly https://www.instagram.com/p/CpsYpDtqoQ5/ files: https://grabcad.com/library/universal-joint-426 original design: Na CAD 2007
NX Unigraphics nx cad automotive automobile

Mechanical stress simulation (FreeCAD 0.19 • FEM Workbench )

Quentin Plisson
in Dimensioning / Tolerancing
3 0 Intermediate
This tutorial give an overview of FEM Workbench on FreeCAD 0.19 which allows mechanical analysis by the finite element method. We will look at the steps to follow to applies a force of given value [N] to selected target geometry. Then perform a finite element analysis without going into details of the calculations.
FreeCAD stress calculation spoon analysis mechanical 0-19 fea fem

Nx CAD Drafting

Diyanshu Singh
in Drafting
2 0 Beginner
Learn to draft in nx cad from basic to advance.
NX Unigraphics siemens design yolkframe drafting nxcad

NX 11: Inter-part Expression 2

Anand Panchal
in Dimensioning / Tolerancing
2 0 Intermediate
Interpart Expression: To create or edit a link to an expression in another part. To apply tolerance and link two dimensions in assembly. Bottom-Up approach
NX Unigraphics dimensioning 11 unigraphics tolerancing expression interpart assembly nx

GD&T Konu anlatımı - Cıvata deliklerinin toleransı

Diren Deniz Çiçek
in Dimensioning / Tolerancing
2 0 Beginner
GD&T Konu anlatımı - Cıvata deliklerinin toleransı
Other gdt

Tutorial: how to correctly upload an assembly model

Ferro
in Translations
2 0 Beginner
Looking through the uploaded models, I found many assembly models that are actually useless because the assembly parts are missing. While uploading an assembly model created with Solidworks, Slid Edge, Catia, NX or other MCAD systems, you should be aware that the upload of the .asm (or .product) it is not enough. You must upload also the part files (.par or .CATPart) in order to make the full assembly visible and usable.
Other ptc edge solid catia solidworks nx

FreeCAD 0.20 - TechDraw Folha de Desenho 2D

Cristiano Alves
in Dimensioning / Tolerancing
1 0 Intermediate
Nesta aula de FreeCAD vamos aprender a personalizar as folhas de desenho 2D, inserir sua logomarca e também como criar sua própria folha do zero seguindo a norma NBR 10.068
FreeCAD desenho 2d nbr 10068 folhas de desenho 2d freecad

Finding the focus of an ellipse graphically

Dzmitry Lysiankou
in Drafting
1 0 Beginner
Finding the focus of an ellipse graphically
Other finding the focus of an ellipse graphically
White Stratasys Logo White GrabCAD Logo
© 2024 Stratasys Inc.
ABOUT US
RESOURCES
SOCIAL
Streamline Pro
Control
Print
Shop
PARTNERS
COMMUNITY
Contact Us Website Terms of Use Software Terms of Use Privacy policy Trademarks Your Data on GrabCAD
The Computer-Aided Design ("CAD") files and all associated content posted to this website are created, uploaded, managed and owned by third-party users. Each CAD and any associated text, image or data is in no way sponsored by or affiliated with any company, organization or real-world item, product, or good it may purport to portray.