Tutorials

  • Drafting ×
  • Autodesk Inventor ×
  • DraftSight ×
  • NX Unigraphics ×
  • Pro/Engineer Wildfire ×
  • GrabCAD Print ×
  • Other ×

Cap screws and machine screws

dea
in Drafting
65 12 Intermediate
Cap screws and machine screws are similar in shape, differing only in their relative sizes. Machine screws are usually smaller in size, compared to cap screws. These are used for fastening two parts, one with clearance hole and the other with tapped hole. The clearance of the unthreaded hole need not be shown on the drawing as its presence is obvious. Figure 5.24 shows different types of cap and machine screws, with proportions marked Cap screws are produced in finish form and are used on machines where accuracy and appearance are important. As cap screws are inferior to studs, they are used only on machines requiring few adjustments and are not suitable where frequent removal is necessary. These are produced in different diameters, upto a maximum of 100 mm and lengths 250 mm. Machine screws are produced with a naturally bright finish and are not heat treated. They are particularly adopted for screwing into thin materials and the smaller ones are threaded throughout the length. They are used in fire-arms, jigs, fixture and dies. They are produced in different diameters upto a maximum of 20 mm and lengths upto 50 mm.
Autodesk Inventor screw cap

Clamp Design

Anup Chauhan
in Drafting
15 1 Beginner
Clamp Design https://www.instagram.com/p/CqAkr5bKxDZ/
NX Unigraphics assembly modeling drafting drawing clamp siemens nx nx nx cad

Project Manager

3D Machine and Technologies by Ferhat
in Drafting
13 0 Expert
Hello, I have been working professionally on technical drawing and design since 1993 I have worked on a wide variety of projects. I am a freelancer Nice to talk and learn with everyone. f.sogukkuyu@gmail.com
Autodesk Inventor

(VIDEO) NX CAD Drafting Tutorials

Diyanshu Singh
in Drafting
11 0 Intermediate
Learn basic drafting NXCAD.
NX Unigraphics drawing drafting nxcad

Basic Symbols Used in Engineering Drawings

FredSWUG
in Drafting
10 3 Beginner
Learn about the ways these common features are described in drawings. Counterbore Countersink Spotface Depth Diameter Radius I should also mention that I did not create this course, I just found it online and thought it was pretty well done. https://www.wisc-online.com/learn/career-clusters/stem/eng16204/basic-symbols-used-in-engineering-drawings
Other radius diameter depth spotface countersink counterbore

3D Modeling

Anup Chauhan
in Drafting
4 0 Beginner
1. Drafting for 3D Modeling https://www.instagram.com/p/CqZOdbUq2ZS/
NX Unigraphics part model unigraphics siemens nx 3d parts cad modeling 3d design

Metric taper

Carlos Soler
in Drafting
3 0 Beginner
It is a simple description of the ISO 3040 taper ratio and an application to the ISO 5356.
Other angle 5356 iso taper

How do you measure an item in a photo?

Ali Nasser
in Drafting
3 0 Beginner
How do you measure an item in a photo? using imagej English language tutorial https://youtu.be/VcQAnfpNwzw
Other measure in pictures measure in photo measure on picture imagej how do you measure an item in a photo

Universal Joint Design In Nx

Anup Chauhan
in Drafting
4 0 Intermediate
universal joints parts and assembly https://www.instagram.com/p/CpsYpDtqoQ5/ files: https://grabcad.com/library/universal-joint-426 original design: Na CAD 2007
NX Unigraphics nx cad automotive automobile

[EPS 04] Cara membuat Etiket Gambar Teknik | Autodesk Inventor

Suryo Puji Buwono
in Drafting
3 0 Beginner
Cara membuat Etiket Gambar Teknik dengan Autodeks Inventor
Autodesk Inventor teknik gambar e-tiket

Nx CAD Drafting

Diyanshu Singh
in Drafting
2 0 Beginner
Learn to draft in nx cad from basic to advance.
NX Unigraphics siemens design yolkframe drafting nxcad

Create blue print by Autodesk Inventor

Ebrahim Zokaee
in Drafting
2 1 Intermediate
In this tutorial, study how to create a blue print by Autodesk inventor.
Autodesk Inventor inventor drafting blue print

Finding the focus of an ellipse graphically

Dzmitry Lysiankou
in Drafting
1 0 Beginner
Finding the focus of an ellipse graphically
Other finding the focus of an ellipse graphically

Jiggle

Alper ERDEM
in Drafting
1 0 Beginner
Plastic Injection Molding Flexible Core
Other

Using Sketch in Inventor Assembly Parts.

Harm chang woo
in Drafting
1 0 Beginner
1. Create a sketch from the assembly parts. 2. Build new parts by referring to sketches.
Autodesk Inventor
White Stratasys Logo White GrabCAD Logo
© 2024 Stratasys Inc.
ABOUT US
RESOURCES
SOCIAL
Streamline Pro
Control
Print
Shop
PARTNERS
COMMUNITY
Contact Us Website Terms of Use Software Terms of Use Privacy policy Trademarks Your Data on GrabCAD
The Computer-Aided Design ("CAD") files and all associated content posted to this website are created, uploaded, managed and owned by third-party users. Each CAD and any associated text, image or data is in no way sponsored by or affiliated with any company, organization or real-world item, product, or good it may purport to portray.