Tutorials

  • Drafting ×
  • Composites ×
  • Measurement / Inspection ×
  • Alibre Design ×
  • NX Unigraphics ×
  • Other ×

Clamp Design

Anup Chauhan
in Drafting
14 1 Beginner
Clamp Design https://www.instagram.com/p/CqAkr5bKxDZ/
NX Unigraphics assembly modeling drafting drawing clamp siemens nx nx nx cad

Basic Symbols Used in Engineering Drawings

FredSWUG
in Drafting
10 3 Beginner
Learn about the ways these common features are described in drawings. Counterbore Countersink Spotface Depth Diameter Radius I should also mention that I did not create this course, I just found it online and thought it was pretty well done. https://www.wisc-online.com/learn/career-clusters/stem/eng16204/basic-symbols-used-in-engineering-drawings
Other radius diameter depth spotface countersink counterbore

3D Modeling

Anup Chauhan
in Drafting
4 0 Beginner
1. Drafting for 3D Modeling https://www.instagram.com/p/CqZOdbUq2ZS/
NX Unigraphics part model unigraphics siemens nx 3d parts cad modeling 3d design

Metric taper

Carlos Soler
in Drafting
3 0 Beginner
It is a simple description of the ISO 3040 taper ratio and an application to the ISO 5356.
Other angle 5356 iso taper

Proper Method to Produce Lobster-back Duct Bends

lawrie
in Drafting
3 1 Beginner
One type of industrial component I have been involved with the design and manufacture of is lobster-back bends. This type of duct bend is made up of segments cut from flat sheets or plates, rolled into cylindrical parts, then assembled. These can be light sheet-metal or manufactured from thick plate. This quick tutorial is a supplement to the one I produced an outline of a method I have used modeling this type of component using Alibre Design. As this supplement concerns producing parts ready for manufacture and applies to whatever software you have used, that is not important as this short tutorial is to outline turning your modeled bend into the flat profile ready to be made into the completed bend. In this modern world, the bend parts will be cut out using CNC laser, or CNC Plasma cutting machines. Sometimes we produce the nc programs ourselves or we are required to produce the correct files for the laser / plasma department to program and cut out. Making the program to cut out the parts starts normally from a 2D dxf file at a scale of 1 : 1. This is the first part of the process that has to be correct. If you produce this dxf incorrectly the finished parts will be useless. Producing this at the right scale, 1 : 1 is different with different 3D cad applications, other problems can be caused by you working in different drawing units. If you are not doing the program, talk to the person who is to make sure you produce the dxf as required. Having a large quantity of wrongly cut parts is not a good thing
Alibre Design

How do you measure an item in a photo?

Ali Nasser
in Drafting
3 0 Beginner
How do you measure an item in a photo? using imagej English language tutorial https://youtu.be/VcQAnfpNwzw
Other measure in pictures measure in photo measure on picture imagej how do you measure an item in a photo

Nx CAD Drafting

Diyanshu Singh
in Drafting
2 0 Beginner
Learn to draft in nx cad from basic to advance.
NX Unigraphics siemens design yolkframe drafting nxcad

Finding the focus of an ellipse graphically

Dzmitry Lysiankou
in Drafting
1 0 Beginner
Finding the focus of an ellipse graphically
Other finding the focus of an ellipse graphically

Jiggle

Alper ERDEM
in Drafting
1 0 Beginner
Plastic Injection Molding Flexible Core
Other

The Secret of Successful 2 THING THAT EXP ENGINNER NOT TELL TO YOU TO IMPROVE DESIGN

Mr.Leo
in Drafting
1 0 Beginner
The Secret of Successful 2 THING THAT EXP ENGINNER NOT TELL TO YOU TO IMPROVE DESIGN by simple way to control revision and making auto part list by NX
NX Unigraphics standard way to make is simple simple way nx

How to create break-out section view in Siemens PLM NX?

Hegedűs György
in Drafting
1 1 Beginner
In this two videos you can see two different solutions for the break-out view creation in NX version 10.
NX Unigraphics view section break-out

Orthographic projection. First & Third angle.

David Crosby
in Drafting
1 0 Beginner
A description of how to develop first and third angle projection drawings. See models in 3-D with my CAD Models.
Other orthographic projection 3rd angle projection 1st angle projection third angle projection first angle projection

TV unit

Manali Dayma
in Drafting
1 0 Beginner
drafting tv unit
Other

Tutorial: how to easily produce a picture to upload with your model

Ferro
in Drafting
0 0 Beginner
Most of the CAD systems provide a command to save as an image the current view. Usually, this command is available in the "save as" menu or in the option menu
Other jps bmp image picture rendering
White Stratasys Logo White GrabCAD Logo
© 2024 Stratasys Inc.
ABOUT US
RESOURCES
SOCIAL
Streamline Pro
Control
Print
Shop
PARTNERS
COMMUNITY
Contact Us Website Terms of Use Software Terms of Use Privacy policy Trademarks Your Data on GrabCAD
The Computer-Aided Design ("CAD") files and all associated content posted to this website are created, uploaded, managed and owned by third-party users. Each CAD and any associated text, image or data is in no way sponsored by or affiliated with any company, organization or real-world item, product, or good it may purport to portray.