Tutorials

  • Design & CAD ×
  • NC Machining ×
  • Measurement / Inspection ×
  • Autodesk 3ds Max ×
  • Autodesk 123D ×
  • JT ×
  • Moi3D ×
  • OBJ ×
  • PTC Creo Elements ×
  • GrabCAD Print ×

How to FDM Print for Part Sliding Clearance

GrabCAD Tutorials
in Assemblies
13 4 Intermediate
If you are 3D printing parts that have to fit/slide together after printing, you will need to put some sort of clearance between those parts in your CAD system. A good starting place is a clearance 2x the layer height you are going to print at, but you should make a few smaller test prints at different clearances to see if the 2x layer height rule holds for your particular situation and orientation. Have fun and happy printing!
GrabCAD Print sliding clearance printing 3d fdm

how to perform analysis test on ansys software

harikrushna dodiya
in Design & CAD
12 1 Intermediate
This is modal analysis of impeller step
PTC Creo Elements

diverse shape translation to JT or STP

juergen grewe
in Translations
9 2 Intermediate
Have found a way to import / translate easy shape files like 3ds, wrl, skp, stl, ifc and so on into JT or STP. The shape files can have texture or not. My interest was how to get the shape files with texture translated to JT. For this, I use PCon Planner and save as 3DS. After this, import it into MeshLab (single texture file / no layer) and save it as WRL (VRML 2). This is than easy to import into Teamcenter Livecyle Visualisation (TCVis) and save as JT. If you like to have more imported WRL/JT files into TCvis (JT2Go) please rename the texture or the view results in TCVis (JT2Go) are bad, looks like unplaced textures. If you like to export files with not a texture another way is to use. The fast one with no colours is to save as stl and import it into your volume modeller. The longer way is here to import it into PCon after this save as Skp (Sketchup) and now is to use Automapki (~40 $ or € / year sorry no freeware I have found) and save as STP file. The result you can now import into a volume modeller and use it there or (and) save it as JT and many other files too. Hope you like this tutorial a bit. If you have any questions please let me know.
JT jt2go tcvis edge solid paint 3d mashlab pconplanner automapki sketchup

Tutorial on Modeling and Simulation of standard gear

Milan Ilić
in Design & CAD
6 1 Intermediate
Tutorial on Modeling and Simulation of standard gear...
PTC Creo Elements gear standard simulation tutorial engineer pro parametric creo

Tutorial: How to add exploded view in drawing?

Milan Ilić
in Design & CAD
5 0 Intermediate
How to add exploded view in drawing?
PTC Creo Elements drawing exploded view creo pro-e

Tutorial How to Make a Dazzling Golden Pearl Teapot in 3D StudioMax

arber leka
in Design & CAD
3 1 Intermediate
here :) follow please
Autodesk 3ds Max studiomax dazzling make how tutorial golden teapot pearl 3d

Industrial Equipment Modeling 3ds max

Yağmur Medya - İsmail Ayvaz YANAR
in Modeling
3 0 Intermediate
I wanna show how can we design an industrial equipment modeling with reference images using by 3ds max. How can we design an equipment with Reference Images ? - 3ds Max Modeling How can we design a machine with Reference Images ? Speed Modeling tutorial, Industrial Machinery and Equipment Modeling Techniques, 3ds Max industrial modeling and rendering, #industrial #modeling #3danimation
Autodesk 3ds Max images reference visualization design rendering modeling 3dsmax industrial

3ds max interior design tutorial - How to use vray materials in slate material editor (part 2)

TeachLAB27
in Modeling
2 0 Intermediate
Lesson 6 Content : - Vray material setting in slate material editor
Autodesk 3ds Max 3ds tutorials design interior tutorial material setting vray

Stacking Your Parts in Z for FDM

Stratasys
in Assemblies
2 0 Intermediate
Have long thin flat parts you’ve always wanted to print right on top of each other in FDM but the slicer never allowed you to? Learn how to use this exclusive new feature in GrabCAD Print Pro!
GrabCAD Print fdm stacking stratasys 3d printing software grabcad print pro

3D Modeling of a Polar Rose Using 3DS Max - Part II

Yoana Ivanova
in Modeling
2 0 Intermediate
MAKING THE SEEDS: 1. Creating the shape of a seed: a seeds is modeled based on a standard sphere primitive, slightly deformed with a Noise modifier to achieve a higher level of realism. 2. Applying the material to the seeds: the material applied to the seeds is intended to give them an icy effect. Resembling white pearls, they contrast against the background of the fine velvet petals. 3. Creating the material: the setting in Material Editor are shown in the figure in Step 3.
Autodesk 3ds Max flower polar rose red rose rose seed

Tutorial: How to change the units from inch to mm in CREO?

Milan Ilić
in Design & CAD
2 0 Intermediate
ja sam u Creo Parametric 2.0 menjao ovako.. C:\Program Files\PTC\Creo 2.0\Common Files\M070\creo_standards\zatim pokrenuo configure i odabrao 5 (vidi sliku)
PTC Creo Elements inch mm change enginner pro parametric creo units

3D Modeling of a Braitenberg Vehicle in 4 Steps using Autodesk 123D Design

Yoana Ivanova
in Modeling
2 0 Intermediate
This tutorial is suitable for designers who have a basic knowledge of using the open source product Autodesk 123D Design. The steps to build a Breitenberg vehicle are as follows: 1. Modeling a wheel: a cylinder with a diameter of 2 cm and a height of 0.5 cm is placed in the workspace. Drill a hole in it by drawing a circle with a diameter of 0.3 cm and extruding - 0.5 cm with the Extrude tool. We soften the edges of the cylinder with Fillet Radius: 0.5. 2. Clone the wheel: rotate the resulting wheel 90° along the Z axis and copy it with Ctrl+C and Ctrl+V. 3. Modeling the vehicle body: regarding the design of the vehicle body, there are various options. In this case the author models a classic vehicle, which is most often shown in the bibliographic sources. After drawing and extruding a surface with the desired shape we apply Fillet with radius 35 on the back edge and with 30 on the front edge for a contemporary design (i could provide more images if it is needed). On the selected side edges we successively apply Fillet with a radius of 9. 4. Make a special place for the sensor: it is necessary to select the square plane that is located in the middle of the case and successively apply Sketch > Project, Sketch > Offset and Construct > Extrude with a negative value.
Autodesk 123D breitenberg vehicle

3ds max interior design tutorial (1/12) - Set up 3D layout plan with DWG

TeachLAB27
in Modeling
2 0 Intermediate
Lesson 1 Content : How to set up 3d layout plan with dwg.file Classic option 1 : Line object and Extrude New option 2 : AEC Extended "wall"
Autodesk 3ds Max tutorial max 3ds dwg plan layout 3d

tutorial 9 ( how to make real pool in 3dmax with mental ray render )

Armin Yousefi Kanani
in Design & CAD
1 2 Intermediate
hi https://grabcad.com/library/swimming-pool-2
Autodesk 3ds Max pool render with real ray mental how make 3dmax

long hair for videogame characters

fernando gonzalez
in Modeling
1 0 Intermediate
In this video i´ll show you how to create long hair for 3d models
Autodesk 3ds Max cards zbrush tutorial hair long
White Stratasys Logo White GrabCAD Logo
© 2024 Stratasys Inc.
ABOUT US
RESOURCES
SOCIAL
Streamline Pro
Control
Print
Shop
PARTNERS
COMMUNITY
Contact Us Website Terms of Use Software Terms of Use Privacy policy Trademarks Your Data on GrabCAD
The Computer-Aided Design ("CAD") files and all associated content posted to this website are created, uploaded, managed and owned by third-party users. Each CAD and any associated text, image or data is in no way sponsored by or affiliated with any company, organization or real-world item, product, or good it may purport to portray.